« previous next »
Pages: [1]   Go Down

Author Topic: Aluminum Crush Washers  (Read 1549 times)

0 Members and 1 Guest are viewing this topic.

Offline Grabcon

  • Hot Shot
  • ***
  • Posts: 354
Aluminum Crush Washers
« on: December 03, 2012, 08:05:52 PM »
I am looking for a place to source the aluminum crush washers that fit in the connectors where the oil lines meet the oil tank on a CB750.

Any thoughts?
Logged
CB750   1974 - Gone
CB750F 1976 - Gone :(
CB550   1978 - Gone & now back
CB900F 1981 - Gone
ST1100 1991 - Gone
ST1100 2000 - Gone
VFR800 2008 - Gone
ST1300 2008 - Gone
BMW F700GS - Wife's
VFR1200X 2016 - Mine

Offline jerry h

  • Hot Shot
  • ***
  • Posts: 392
Re: Aluminum Crush Washers
« Reply #1 on: December 03, 2012, 09:07:30 PM »
Any of the places like  www.servicehonda.com  etc would have them,

94109-12000  (12mm)
94109-14000 (14mm)

I just bought several of each and have some spares on hand now.
Logged
"It is not the critic who counts, the credit belongs to the man who is actually in the arena, whose hands are covered with grease and oil."

K2 http://forums.sohc4.net/index.php/topic,105097.0.html

Offline Dream750

  • Hot Shot
  • ***
  • Posts: 583
Re: Aluminum Crush Washers
« Reply #2 on: December 03, 2012, 09:29:10 PM »
The Yamiya option looks interesting, but I haven't personally used it:

 http://www.yamiya750.com/index.php?main_page=product_info&cPath=21_66&products_id=1974
Logged

Offline dave500

  • Really Old Timer ...
  • *******
  • Posts: 16,996
  • WHAT?no gravy?
Re: Aluminum Crush Washers
« Reply #3 on: December 03, 2012, 10:20:35 PM »
you can use copper ones.
Logged

Offline Grabcon

  • Hot Shot
  • ***
  • Posts: 354
Re: Aluminum Crush Washers
« Reply #4 on: December 04, 2012, 07:23:20 AM »
Guys. Thanks much
Logged
CB750   1974 - Gone
CB750F 1976 - Gone :(
CB550   1978 - Gone & now back
CB900F 1981 - Gone
ST1100 1991 - Gone
ST1100 2000 - Gone
VFR800 2008 - Gone
ST1300 2008 - Gone
BMW F700GS - Wife's
VFR1200X 2016 - Mine

Offline RSchaefer

  • Hot Shot
  • ***
  • Posts: 491
Re: Aluminum Crush Washers
« Reply #5 on: December 04, 2012, 07:26:21 AM »
HF has a crush washer assortment but I have not looked yet to see if they have the correct sizes, I think they are copper, just as good as the AL.
Logged
'66 CB77, 305 Superhawk (Project Bike)
'72 CL 175, (Project Bike)
'75 CB750F (Project Bike, Complete)
'05 GL1800 ABS Black Cherry (Current Ride)
'87 GL1200 Wineberry Aspencade
'83 GL1100 Wineberry Aspencade
'76 GL1000 LTD
'75 GL1000 Turquoise
'69 Honda 750cc Gold
'67 Honda 305 Dream Black
'63 Honda S90 Black
'61 Honda 50 Red
GWRRA #000008
VJMC Member

Markcb750

  • Guest
Re: Aluminum Crush Washers
« Reply #6 on: December 04, 2012, 04:43:41 PM »
Logged

Offline dave500

  • Really Old Timer ...
  • *******
  • Posts: 16,996
  • WHAT?no gravy?
Re: Aluminum Crush Washers
« Reply #7 on: December 04, 2012, 04:51:56 PM »
any diesel pump and injector service will have all sorts.
Logged
Pages: [1]   Go Up
« previous next »