Author Topic: Manufacturers cup (Read 61290 times)

kmb69 · « **Reply #150 on:** September 17, 2016, 11:27:23 AM »

Yo bike making some power! Kool!

Damn, don't sound like Frank's motor is so tired after all!

What's with the clutch?

Bill/BentON Racing · « **Reply #151 on:** September 17, 2016, 11:59:44 AM »

Gotta check later today, going to shim the springs first, if the rest looks ok, making lots of power, lol!

, Bill
Frank's 1.38 60ft might be a PB for him on the 750!

Medyo Bastos · « **Reply #152 on:** September 17, 2016, 01:59:42 PM »

yeah, i been feeling the same bout frankies motor!

great job guys

...Save a tree, eat a beaver...

Bill/BentON Racing · « **Reply #153 on:** September 17, 2016, 03:51:31 PM »

Frank and me ,Twin Ten's, lol.l We got video!

kmb69 · « **Reply #154 on:** September 17, 2016, 04:51:39 PM »

Quote from: Bill/BentON Racing on September 17, 2016, 03:51:31 PM

Frank and me ,Twin Ten's, lol.l We got video!

Is this 2016?

That's awesome! Lot of hard work pays off!

scottly · « **Reply #155 on:** September 17, 2016, 07:31:51 PM »

Quote from: kmb69 on September 17, 2016, 11:27:23 AM

Damn, don't sound like Frank's motor is so tired after all!

dragracer · « **Reply #156 on:** September 17, 2016, 10:38:01 PM »

Quote from: Bill/BentON Racing on September 17, 2016, 09:20:18 AM

Thought y'all might like this one. In 1975 Terry Vance held the Pro Stock record, mph was 125.xx. We're getting closer! Ran Frank in qualifying, gotta go find the time slip, bet it was the first time in a while there was a time slip with two 10 second Honda's on it! We both cut identical. 045 R/T!

So now we see where a good flowing head with oversized valves compares to a basic, ported F model head with stock valves. The good head flows way better on top end and makes more MPH. Bill ran almost 125 versus my best of 121mph. Once he figures out how to lower his 60', that bike will run a low ten easily.

dragracer · « **Reply #157 on:** September 18, 2016, 04:33:49 AM »

And yes, my engine is worn out. Will have to tear it down right after the last race of the season to make some much needed changes. Keeping my fingers crossed that it'll last til then.

POPS 911 · « **Reply #158 on:** September 18, 2016, 05:21:09 AM »

The good thing is that Frank and Bill can say they got Honda CB750 based SOHC that ran 10's and the tickets to PROVE IT !!!!!! Good job to both riders and tuners your EFFORTE EQUAL RESULTS now the SEL CLASS at Valdosta will be a real DEAL ........ 400' yea

Medyo Bastos · « **Reply #159 on:** September 18, 2016, 06:05:41 AM »

i agree completely pops

...Save a tree, eat a beaver...

Medyo Bastos · « **Reply #160 on:** September 18, 2016, 07:14:36 AM »

how did wilbur do???

...Save a tree, eat a beaver...

madmtnmotors · « **Reply #161 on:** September 18, 2016, 08:48:06 AM »

Quote from: Medyo Bastos on September 18, 2016, 07:14:36 AM

how did wilbur do???

...Save a tree, eat a beaver...

Well.... after beating Bill in round two yesterday by a measly .0021, I missed my dial-in in round three by .2 and lost by .2.

Random pairings today pitted myself against Frank (dragracer) in both rounds one and two. I thought Frank's wife was going to fall over (or come over and smack me) when she saw Frank and I paired again in round two. Frank stumbled off the line in round one giving me the round one win, which is kind of an empty win with the auto buy-back to round two, but I'm counting it. Round two was Frank's to win since I broke out by .059... but Frank left .009 too soon! Red light! Hot damn! I'm going to round three again today!

AND both Frank and Bill have yet to beat me...

Jerry Rxman Griffin aka MuthaF'er · « **Reply #162 on:** September 18, 2016, 08:52:30 AM »

Congrats but put the OTHER guys on the trailer.

madmtnmotors · « **Reply #163 on:** September 18, 2016, 08:54:55 AM »

Quote from: Jerry Rxman Griffin aka MuthaF'er on September 18, 2016, 08:52:30 AM

Congrats but put the OTHER guys on the trailer.

Yeah, the luck of the draw has been working against us on the pairings this weekend.

Bill/BentON Racing · « **Reply #164 on:** September 18, 2016, 10:25:48 AM »

Well, if Wilbur cuts a better light than Frank's .068, mine was .069, then Frank will go from sweeping all 3 to being swept! Lol! I got em on mph.......and ET today, new PB of 10.54 and 6.69 in the 1/8! Frank ran 10.7 and 10.6 I think.
Yippee Kai Yeah we having big fun, saw 124.xx now 3 runs in a row and 10 out 10, 10 second passes, Bill be happy, lol! More later, Frank was number 1 qualifier in Crazy 8's! K, Bill

madmtnmotors · « **Reply #165 on:** September 18, 2016, 10:49:31 AM »

We ran round two at 11:37 A.M. yesterday and did not get to run round three until 7:21 P.M.

Right at eight friggin hours between rounds.

Today ain't lookin much better.

Bill/BentON Racing · « **Reply #166 on:** September 18, 2016, 01:23:41 PM »

Well lookee here!

POPS 911 · « **Reply #167 on:** September 18, 2016, 02:32:56 PM »

With all them start carts sitting there does that mean FRANK WON CRAZY 8'S ?

Bill/BentON Racing · « **Reply #168 on:** September 18, 2016, 03:29:50 PM »

No, he was number 1 qualifier in Crazy 8's!

dragracer · « **Reply #169 on:** September 18, 2016, 04:18:44 PM »

Got number one qualifier. Had the first round bye run and ran an 8.89@155mph. Came back in 2nd round and got paired with my buddy Barry from Virginia Beach. After both of us staged it seemed like they held the light to long so on first flash I threw the clutch and they system threw a red light on me. Arrrgh!! Ran an 8.91@ 156mph. Couldn't capitalize on the qualifying position to carry me forward. All in all, it wasn't my best weekend starting with the RV debacle on Friday. We're on our way home, nothing broken and no one hurt.Overall, A successful weekend of racing.

dragracer · « **Reply #170 on:** September 18, 2016, 07:24:19 PM »

Here's the time slip from the #1 qualifier pass in Crazy 8's (8.88 index).

754 · « **Reply #171 on:** September 18, 2016, 08:14:56 PM »

Congrats guys you did well and out on a show..

Old Scrambler · « **Reply #172 on:** September 18, 2016, 08:58:27 PM »

Sounds and Looks as if everyone had some fun

dragracer · « **Reply #173 on:** September 19, 2016, 11:29:08 AM »

Didn't I tell everyone that Wilbur would be the man to beat. Well, he's proven it twice with me and once with Bill. He's gained more confidence in his abilities to race because of the minor but very important changes he's made to the bike. His ET's are more consistent now that his launches are easier. Adding more modifications like an extended arm and an airshifter will help also. I'd suggest finding another seat and getting it cut down as much as possible to lower your body on the bike and reduce the center of gravity. Again, its the little things you do that can make some of the biggest difference.

Great this weekend Wilbur. You advanced in the rounds when the rest of us were sent back to the trailer. Get some more seat time like we discussed to work on your reaction time. That's what's going to be instrumental in winning rounds.

Bill/BentON Racing · « **Reply #174 on:** September 19, 2016, 08:19:10 PM »

Well, here's Mr Mummey getting ready to draw for 3rd round!
Talked with Bill Hahn Jr.about our issues with no points for winning Rd 2 for about 20 minutes or so this morning. Also got with Manny ,Flying Taco who eats lunch with Jay once a week. Next year hopefully will be different. Man, what a fun weekend. Bill Check out Wilbur's new team shirt, that's Dusty Brazel on his right who he ran in the 3rd round.

News:

Author Topic: Manufacturers cup (Read 61290 times)