Author Topic: Manufacturers cup (Read 61302 times)

dragracer · « **Reply #225 on:** October 14, 2016, 08:04:32 PM »

Quote from: kmb69 on October 14, 2016, 07:01:08 PM

The fastest N/A SOHC 750 that I am aware of, although with an extended swingarm, is Gary Pena. He ran high 8's.
I think Bill has the exact info on Gary's records. Hopefully he will chime in here with an update.

Wheelie bar bike, aftermarket chassis

Bill/BentON Racing · « **Reply #226 on:** October 14, 2016, 08:44:33 PM »

J. Frank's time is the quickest N/A no bar bike CB750 we know of at this time.....lol! Bill

Jerry Rxman Griffin aka MuthaF'er · « **Reply #227 on:** October 14, 2016, 08:44:44 PM »

Quote from: scottly on October 14, 2016, 07:16:30 PM

Yeah, I think Bill has Gary's info.

And what else does Billy have of Gary's?

scottly · « **Reply #228 on:** October 14, 2016, 09:04:43 PM »

Lots!

dragracer · « **Reply #229 on:** October 15, 2016, 12:23:45 AM »

Quote from: Bill/BentON Racing on October 14, 2016, 08:44:33 PM

J. Frank's time is the quickest N/A no bar bike CB750 we know of at this time.....lol! Bill

I like the last part- "At this time". Sounds like someone has something up their sleeve. Hahahaha. You got the package sir- lets see the numbers. I feel a new Super Eliminator record coming from the Benton Racing camp.

dragracer · « **Reply #230 on:** October 15, 2016, 12:35:43 AM »

Not sure if I'll be shooting for 10.20's at the last race. I plan to find a sweet spot for the bike so its consistent. I need to make some rounds if I want to finish in the top ten since my goal of a top 5 finish has slipped away this season. I'll try to lower the record in 2017 instead. Its your turn Bill. I left you with a soft ET to lower- shouldn't be an issue for you.

Bill/BentON Racing · « **Reply #231 on:** October 15, 2016, 07:22:32 AM »

You sir are too kind! But, I understand. I would love to see you finish in the Top 5! And it's about consistency and good R/T! You can do both. I'll do my best to lower it as much as I can, if a can! Stay tuned. Yes I have Gary's purpose built in the mid eighties SOHC CB750K engine! 1162cc, 1062 with 1/4 " $troker! But I'm racing the one I built...with lots of help and advice!

Jerry Rxman Griffin aka MuthaF'er · « **Reply #232 on:** October 15, 2016, 10:50:30 AM »

That's what I'm talking about

Too many toys

NEVER.... That's gonna make one helluva backup once you prove your own hard work pays off. Keep at it! You're proving you deserve it.

RPE Racing · « **Reply #233 on:** October 15, 2016, 06:42:40 PM »

My head is spinning...lol

Lets narrow it down. N/A no wheelie bar - ET and trap is available.

We wanna give ours a run and would like to get an idea on past efforts. This is not a drag racing bike but launches hard.

kmb69 · « **Reply #234 on:** October 15, 2016, 08:02:48 PM »

Pretty sure to narrow it down:
The quickest bike is this category is Frank's with a 10.345 ET.
The fastest bike in this category is Bill's at 124.73 MPH.
Both of these bikes are N/A, stock frames with extended swing arms, no bars and under 1100cc's.

Both of these guys have new iron in the works that will undoubtedly exceed their current numbers.

Jerry Rxman Griffin aka MuthaF'er · « **Reply #235 on:** October 16, 2016, 03:38:23 PM »

Just opened up a Man Cup email about the 'schedule'. WTF is this?! What am I missing? Gates open Wed. Racing starts Thursday. Is there only one race day as we know it for Street ET vs Sat and Sun?

Bill/BentON Racing · « **Reply #236 on:** October 16, 2016, 04:16:49 PM »

Haven't gotten mine yet. ? Not sure what's up.

Bill/BentON Racing · « **Reply #237 on:** October 16, 2016, 05:36:54 PM »

I saw the schedule. We race,Sat and Sunday. Our Rd one for Sat, the one you can run or not is Friday night. No rd one on Sunday! Round one for Sunday is Saturday night. That's how I read it.

Jerry Rxman Griffin aka MuthaF'er · « **Reply #238 on:** October 16, 2016, 05:53:57 PM »

Forwarded email coming your way.

dragracer · « **Reply #239 on:** October 16, 2016, 11:38:37 PM »

Quote from: Bill/BentON Racing on October 16, 2016, 05:36:54 PM

I saw the schedule. We race,Sat and Sunday. Our Rd one for Sat, the one you can run or not is Friday night. No rd one on Sunday! Round one for Sunday is Saturday night. That's how I read it.

Agreed Bill. That race that starts on Wednesday is not the regular Cup race.

RPE Racing · « **Reply #240 on:** October 17, 2016, 12:03:41 AM »

Quote from: kmb69 on October 15, 2016, 08:02:48 PM

Pretty sure to narrow it down:
The quickest bike is this category is Frank's with a 10.345 ET.
The fastest bike in this category is Bill's at 124.73 MPH.
Both of these bikes are N/A, stock frames with extended swing arms, no bars and under 1100cc's.

Both of these guys have new iron in the works that will undoubtedly exceed their current numbers.

Thanks a lot. Exactly what I was looking for.

dragracer · « **Reply #241 on:** October 17, 2016, 07:38:08 AM »

Quote from: RPE Racing on October 17, 2016, 12:03:41 AM

Quote from: kmb69 on October 15, 2016, 08:02:48 PM
Pretty sure to narrow it down:
The quickest bike is this category is Frank's with a 10.345 ET.
The fastest bike in this category is Bill's at 124.73 MPH.
Both of these bikes are N/A, stock frames with extended swing arms, no bars and under 1100cc's.

Both of these guys have new iron in the works that will undoubtedly exceed their current numbers.

Thanks a lot. Exactly what I was looking for.

FYI,

I'll gladly accept sponsorship via a set of your SOHC rods to lower my ET even more. I'm not ashamed to ask :-).

Bill/BentON Racing · « **Reply #242 on:** October 17, 2016, 12:57:59 PM »

Hey, get in line! LMAO, Bill

RPE Racing · « **Reply #243 on:** October 17, 2016, 01:40:41 PM »

I wish we could, however we already sponsor our race bike that sucks us dry

Good luck in your efforts!

dragracer · « **Reply #244 on:** October 17, 2016, 02:36:17 PM »

Quote from: RPE Racing on October 17, 2016, 01:40:41 PM

I wish we could, however we already sponsor our race bike that sucks us dry

Good luck in your efforts!

Well, I had to ask. One day I might buy a set of your rods and help sponsor you myself. Lol.

POPS 911 · « **Reply #245 on:** October 18, 2016, 06:23:46 AM »

If you win the ST/ET race and I give you the HUMOR $500 CASH you can buy a set of those rods with no out of your pocket. Go get them win tickets !!!!!

POPS BK911 NHRA

POPS 911 · « **Reply #246 on:** October 26, 2016, 08:30:19 AM »

FRANK: How much do those rods cost ?? Watched a fellow drag racer at our last 1/8 mile race blow up his KZ LTD motor at the 660' mark with a broken rod that exploded that roller bearing motor with him sliding thru oil and motor parts on a bar bike 1/4 mile [9.20] et. bike cut the motor in half..... he did not go down, luck for this young man who has raced that bike for years. Closed track down for 2 hours clean up !!!!!

POPS BK911

dragracer · « **Reply #247 on:** October 26, 2016, 09:46:49 AM »

Quote from: POPS 911 on October 26, 2016, 08:30:19 AM

FRANK: How much do those rods cost ?? Watched a fellow drag racer at our last 1/8 mile race blow up his KZ LTD motor at the 660' mark with a broken rod that exploded that roller bearing motor with him sliding thru oil and motor parts on a bar bike 1/4 mile [9.20] et. bike cut the motor in half..... he did not go down, luck for this young man who has raced that bike for years. Closed track down for 2 hours clean up !!!!!

POPS BK911

Pops,
I think it was less than $600 shipped to the US for those rods. Believe me, I'm thinking more and more about putting a set in my motor. Those RC h/d steel rods have been run for a long time so its inevitable that failure is going to happen one day. I've got to replace the worn crank anyhow so that would be the perfect time to get the completely new rotating assembly balanced. I'm working on a junk pile engine now as a backup til I can update my original engine one day.

Glad your guy survived that catastrophe unscathed. I've witnessed quite a few roller motors tear up cranks and cases and its never a pretty sight. I guess it'll be next season before we see you again. Take care.

dragracer · « **Reply #248 on:** October 28, 2016, 12:57:45 AM »

Bill, what the projection for the new super eliminator record you intend to reset?

The soft number is 10.65 right now.

dragracer · « **Reply #249 on:** October 28, 2016, 01:00:19 AM »

As a reminder, here's your target Bill

.

News:

Author Topic: Manufacturers cup (Read 61302 times)