« previous next »
Pages: [1]   Go Down

Author Topic: Anyone have a DOHC 750 and a ruler???  (Read 1287 times)

0 Members and 1 Guest are viewing this topic.

Offline trueblue

  • A person who has had many interesting experiences, some of which are true, is known as an
  • Old Timer
  • ******
  • Posts: 3,124
Anyone have a DOHC 750 and a ruler???
« on: December 30, 2012, 12:41:02 AM »
I was wondering if anyone could help me out.  I'm chasing a couple of measurements of the front end of a DOHC 750.  The 2 measurements I'm looking for are from the centre of the front axel to the centre of the lower caliper bolt hole on the leg, and also the distance between the caliper mount bolt holes, centre to centre.  If you can provide these measurements it would be greatly appreciated.  ;D
Logged
1979 CB650Z
Nothing can be idiot proofed, the world keeps producing better idiots.
Electronic Guages for your SOHC 4

Offline trueblue

  • A person who has had many interesting experiences, some of which are true, is known as an
  • Old Timer
  • ******
  • Posts: 3,124
Re: Anyone have a DOHC 750 and a ruler???
« Reply #1 on: December 30, 2012, 03:46:14 PM »
??? No-one ???
Logged
1979 CB650Z
Nothing can be idiot proofed, the world keeps producing better idiots.
Electronic Guages for your SOHC 4

Offline Magpie

  • Old Timer
  • ******
  • Posts: 3,303
Re: Anyone have a DOHC 750 and a ruler???
« Reply #2 on: December 30, 2012, 05:45:47 PM »
I have one but don't have it apart, you may want to try these guys http://www.cb1100f.net/index.php  or http://www.cb750c.com/index.php   Both forums have ben very helpful for me. Cliff.
Logged

Offline trueblue

  • A person who has had many interesting experiences, some of which are true, is known as an
  • Old Timer
  • ******
  • Posts: 3,124
Re: Anyone have a DOHC 750 and a ruler???
« Reply #3 on: December 30, 2012, 06:12:03 PM »
Cliff, you shouldn't need to pull it apart, all I'm after is a near enough measurement to know I'm not barking up the wrong tree.  If you could please measure the points in the picture I have marked below it would be greatly appreciated. ;D

Logged
1979 CB650Z
Nothing can be idiot proofed, the world keeps producing better idiots.
Electronic Guages for your SOHC 4

Offline Magpie

  • Old Timer
  • ******
  • Posts: 3,303
Re: Anyone have a DOHC 750 and a ruler???
« Reply #4 on: December 31, 2012, 03:47:46 AM »
Okay, later today. Cliff.
Logged

Offline trueblue

  • A person who has had many interesting experiences, some of which are true, is known as an
  • Old Timer
  • ******
  • Posts: 3,124
Re: Anyone have a DOHC 750 and a ruler???
« Reply #5 on: December 31, 2012, 03:53:04 AM »
Thankyou ;D
Logged
1979 CB650Z
Nothing can be idiot proofed, the world keeps producing better idiots.
Electronic Guages for your SOHC 4

Offline mono

  • Definitely no
  • Expert
  • ****
  • Posts: 1,271
  • 1975 Honda CB550, 1978 CB750K (in progress)
Re: Anyone have a DOHC 750 and a ruler???
« Reply #6 on: December 31, 2012, 04:30:48 AM »
I'd volunteer butt my forks are off...

Sent from my SPH-L710 using Tapatalk 2

Logged

Offline trueblue

  • A person who has had many interesting experiences, some of which are true, is known as an
  • Old Timer
  • ******
  • Posts: 3,124
Re: Anyone have a DOHC 750 and a ruler???
« Reply #7 on: January 01, 2013, 12:20:52 AM »
I've got it, they are 65mm between the caliper mounts and 65mm between the axel centre and lower caliper bolt, exactly what I need ;D
Logged
1979 CB650Z
Nothing can be idiot proofed, the world keeps producing better idiots.
Electronic Guages for your SOHC 4

Offline Magpie

  • Old Timer
  • ******
  • Posts: 3,303
Re: Anyone have a DOHC 750 and a ruler???
« Reply #8 on: January 01, 2013, 08:19:04 AM »
Good! I got very busy moving a friend yesterday and was going to measure today but you beat me to it. Cliff.
Logged

Offline trueblue

  • A person who has had many interesting experiences, some of which are true, is known as an
  • Old Timer
  • ******
  • Posts: 3,124
Re: Anyone have a DOHC 750 and a ruler???
« Reply #9 on: January 01, 2013, 02:38:23 PM »
Thanks anyway Cliff, turned out a mate of mine had one hiding in the back of his shed.  I should have know though, he has everything else there ;D.
Logged
1979 CB650Z
Nothing can be idiot proofed, the world keeps producing better idiots.
Electronic Guages for your SOHC 4
Pages: [1]   Go Up
« previous next »