Author Topic: Shortround's New Project ////888cc\\\\ (Read 17902 times)

754 · « **Reply #25 on:** January 27, 2013, 09:45:07 PM »

Looks good but get another oil filter housing and make it finless..

SOHC4 Cafe Racer Fan · « **Reply #26 on:** January 27, 2013, 10:11:13 PM »

Beautiful!

Garystratos201 · « **Reply #27 on:** January 28, 2013, 09:18:20 AM »

I like the look.......gary

SHORTROUND · « **Reply #28 on:** February 02, 2013, 05:49:08 AM »

Did some wiring last night. I'm using the ignition switch to trigger a 30 amp relay. Worked great on my other bikes to keep the super coils and dyna III ignition from draining down the battery. The honda ignition has to much current drop.

SHORTROUND · « **Reply #29 on:** February 02, 2013, 05:50:04 AM »

SHORTROUND · « **Reply #30 on:** February 03, 2013, 06:53:10 AM »

Coming along now. Finished the wiring harness; i just need to fabricate a gauge mounting plate for the new 2.5" gauges and make some steel braided oil lines.

SHORTROUND · « **Reply #31 on:** February 16, 2013, 05:47:52 AM »

pics of my gauge mount. I just can't pay $25 for something I can make myself from a piece of scrap aluminium laying around in my garage.

theofam · « **Reply #32 on:** February 16, 2013, 08:24:32 AM »

How did you cut out the center piece of the gauge mounting plate? Also, how did you dress the edges?

The bike is looking great!

SOHC4 Cafe Racer Fan · « **Reply #33 on:** February 16, 2013, 09:28:26 AM »

Nice work on the bracket!

SHORTROUND · « **Reply #34 on:** February 16, 2013, 12:40:14 PM »

Quote from: theofam on February 16, 2013, 08:24:32 AM

How did you cut out the center piece of the gauge mounting plate? Also, how did you dress the edges

I drilled four holes and connected them using a Dremel. I ran a file around the edges to clean and de-burr them.

Stev-o · « **Reply #35 on:** February 16, 2013, 08:08:37 PM »

Nice mount. There is a market for those but not sure it is worth your time.

SHORTROUND · « **Reply #36 on:** February 23, 2013, 04:42:19 PM »

I just spent 6 hours sanding the final aluminum bits. I really hate sanding

I need a drink

SHORTROUND · « **Reply #37 on:** February 24, 2013, 11:47:47 AM »

Sooooo tired of sanding..... $:-\$

SOHC4 Cafe Racer Fan · « **Reply #38 on:** February 24, 2013, 04:56:09 PM »

Coming along nicely. I have some parts that need sanding if you need more!

SHORTROUND · « **Reply #39 on:** February 25, 2013, 05:47:34 AM »

Not funny. I just discovered I forgot the sprocket mount.

Garystratos201 · « **Reply #40 on:** February 25, 2013, 06:28:26 AM »

Nice work on the mount and I like the electrical...........Gary

SHORTROUND · « **Reply #41 on:** February 27, 2013, 05:28:30 PM »

Laced up the wheels tonight and ordered some tires and tubes.

SHORTROUND · « **Reply #42 on:** February 27, 2013, 05:35:58 PM »

shinny

Vinhead1957 · « **Reply #43 on:** February 27, 2013, 05:46:33 PM »

Them some purty wheels!

SHORTROUND · « **Reply #44 on:** March 02, 2013, 01:35:09 PM »

Made a cooling vent for the rear drum today.

lwahples · « **Reply #45 on:** March 02, 2013, 02:03:52 PM »

Sweet looking project! Wicked eye for detail.

Stev-o · « **Reply #46 on:** March 02, 2013, 04:37:51 PM »

That looks fantastic.

SHORTROUND · « **Reply #47 on:** March 03, 2013, 05:34:40 AM »

Pic of the gauge mount

SHORTROUND · « **Reply #48 on:** March 03, 2013, 12:21:42 PM »

You have to have a drilled rotor if you have a vented drum. Lol.

SOHC4 Cafe Racer Fan · « **Reply #49 on:** March 04, 2013, 07:06:13 PM »

Quote from: SHORTROUND on March 02, 2013, 01:35:09 PM

Made a cooling vent for the rear drum today.

Short,

I like the cooling vents on the rear brake. How exactly did you fabricate them? Laser, waterjet, etc.??

News:

Author Topic: Shortround's New Project ////888cc\\\\ (Read 17902 times)