« previous next »
Pages: [1]   Go Down

Author Topic: All new seals. Now where do they all go?  (Read 1148 times)

0 Members and 1 Guest are viewing this topic.

Offline Thousandson

  • Enthusiast
  • **
  • Posts: 135
  • Ride, Fix, Repeat
All new seals. Now where do they all go?
« on: January 20, 2013, 12:38:22 PM »
I got an engine seal kit from Cycle X. I know where some of them go what about the others. Am i missing something or are they not used at all. The bike is a Honda Cb750F 78'
 
(Two of the seals are for kick start, and gear change)
1.
2.
3.
4.
5. Final drive seal for this bike. I know that one fits.
6. Older Final drive seal?
7. Points seal
8.

Logged
Current ride: 78' Cb750F

Offline Kevin D

  • Old Timer
  • ******
  • Posts: 2,869
  • SE Michigan
Re: All new seals. Now where do they all go?
« Reply #1 on: January 20, 2013, 07:44:01 PM »
The size should be marked on each seal. You can cross ref the sizes with this excellent parts fiche.

The little guy #8 for the tach drive, 4.8x14.5?
 Clutch Cover 18X29X7 

 http://www.cmsnl.com/honda-cb750f-750-super-sport-1978-usa_model7240/partslist/
Logged
71 CB750 K1
104,000 miles
Original Owner
———past———
70 SL100/125/150
70 Candy BlueGreen CB 750 K0
————————————————-
Former Honda parts kid/counter kid/do all
—————————————————————-
Whether you think you can or think you can’t, you’re right
Genius is 99% perspiration, 1% inspiration

Offline cbr954

  • Hot Shot
  • ***
  • Posts: 402
Re: All new seals. Now where do they all go?
« Reply #2 on: January 20, 2013, 08:08:51 PM »
Yes the smaller final drive seal is for the older motors.  Number 4 I believe is for the starter clutch gear behind the alt rotor.  One of them will be for the clutch shaft in the clutch cover.
Logged
03 CBR954RR, 72 750 chopper(970cc
F2 head), 2017 CRF450R, 2001 CR250R, 72 CB500, 79 XR250, 04 CRF50,70's soon to be rebuilt cb750 drag bike.

Offline Dimitri13

  • Not a
  • Master
  • *****
  • Posts: 1,603
  • 1974 CB550K
Re: All new seals. Now where do they all go?
« Reply #3 on: January 21, 2013, 12:04:54 AM »
The 750 doesn't have that solid (no hole in the center) seal that goes behind the chain?
Logged
Pages: [1]   Go Up
« previous next »