« previous next »
Pages: [1]   Go Down

Author Topic: Valve Inspection Covers Source  (Read 1085 times)

0 Members and 2 Guests are viewing this topic.

Jay Ace

  • Guest
Valve Inspection Covers Source
« on: January 20, 2013, 10:01:49 AM »
Need to replace few of those covers as they were completely striped off by someone that owned the bike before me   ::)
Other than Cycle Exchange, does anyone sell anything custom? Especially gold.
I really like the CE ones but they are $$$

Thanks
Logged

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,289
Re: Valve Inspection Covers Source
« Reply #1 on: January 20, 2013, 10:10:56 AM »
Tapped covers are cheap. Have them powder coated....

Check out ttr400.com for some anodized ones...
« Last Edit: January 20, 2013, 10:15:03 AM by flybox1 »
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Jay Ace

  • Guest
Re: Valve Inspection Covers Source
« Reply #2 on: January 20, 2013, 04:11:11 PM »
Quote from: flybox1 on January 20, 2013, 10:10:56 AM
Tapped covers are cheap. Have them powder coated....

Check out ttr400.com for some anodized ones...
Yea checked his site before but it appears that he is out traveling and not selling anything right now.
Thanks
Logged

Offline MJL

  • Don't listen to me, I'm no
  • Expert
  • ****
  • Posts: 1,162
  • Oh hell, what's one more bike?
Re: Valve Inspection Covers Source
« Reply #3 on: January 20, 2013, 04:46:22 PM »
I saw some that were dome shaped, you tighten them from the inside. Not sure why you'd want to have to remove the valve cover to do an adjustment.
Logged
No matter how fast or how far I rode, I couldn't leave her memory behind.

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,464
  • Central Texas
Re: Valve Inspection Covers Source
« Reply #4 on: January 20, 2013, 06:01:19 PM »
Here are the smooth valve adj caps...

http://www.lowridersbysummers.com/parts/index.htm
Logged
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline Cabilao

  • Hot Shot
  • ***
  • Posts: 332
  • Diving and Driving
    • Sea-Explorers Watersport
Re: Valve Inspection Covers Source
« Reply #5 on: January 20, 2013, 07:28:06 PM »
take a look at this one. its from vintagecb750.com. they are chrom,finned and 35 bucks(complete set).

http://www.vintagecb750.com/products/4/engine/69/valves-valve-seals
Logged
before:
Kreidler RMC(50cc)
CB400N(first bike)
RD350LC(more than one)
XS850(great bike)
CB900F(wish i still have it)
FZR1000(too fast)
Rickman CR900(sold for a good price)
now:
Rusi 125
CB 125 CL(just for fun)
Yamaha XTZ 125
CB750P7(mystery bike)
77/78 cool 2 member

Offline Red Good

  • Enthusiast
  • **
  • Posts: 140
Re: Valve Inspection Covers Source
« Reply #6 on: January 21, 2013, 08:24:17 AM »
We have stock style ones in stock . About 2/3 of the way down the page .

http://www.cycleonemanufacturing.com/id280.html
Logged

Offline alancop

  • Vroom, vroom!
  • Enthusiast
  • **
  • Posts: 115
  • Vroom, vroom!
Re: Valve Inspection Covers Source
« Reply #7 on: January 21, 2013, 09:04:49 AM »
Are the 750 and 550 covers the same size? It would be cool to be able to use those finned covers on my 550.
Logged
It's almost twice as old as me, I don't know how the hell it works!

Jay Ace

  • Guest
Re: Valve Inspection Covers Source
« Reply #8 on: January 21, 2013, 10:22:58 AM »
Anyone have photos of the finned ones installed? I've seen those before but never seen them on a bike.
Logged

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,464
  • Central Texas
Re: Valve Inspection Covers Source
« Reply #9 on: January 21, 2013, 03:23:24 PM »
Quote from: alancop on January 21, 2013, 09:04:49 AM
Are the 750 and 550 covers the same size?

Yes
Logged
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Jay Ace

  • Guest
Re: Valve Inspection Covers Source
« Reply #10 on: January 21, 2013, 06:14:23 PM »
I just ended up getting stockers from eBay. Spending $140 on customs was a little nuts. Could buy a lot of other stuff for that kind of money!
Logged

Offline nccb

  • Expert
  • ****
  • Posts: 1,145
  • 1974 CB750 Four
Re: Valve Inspection Covers Source
« Reply #11 on: January 21, 2013, 06:19:04 PM »
Quote from: Red Good on January 21, 2013, 08:24:17 AM
We have stock style ones in stock . About 2/3 of the way down the page .

http://www.cycleonemanufacturing.com/id280.html

Thats a pretty good deal on those.  Do you get two per set with o-rings?
Logged

Offline Red Good

  • Enthusiast
  • **
  • Posts: 140
Re: Valve Inspection Covers Source
« Reply #12 on: January 21, 2013, 09:52:31 PM »
It says individually but there are 2 in the pic , I will get Kate to clarify asap . But I think each . Red
Logged

Offline Dimitri13

  • Not a
  • Master
  • *****
  • Posts: 1,603
  • 1974 CB550K
Re: Valve Inspection Covers Source
« Reply #13 on: January 22, 2013, 03:58:10 PM »
Says sold individually, and that Honda's price is $7.99, which is what they charge for one.
Logged

Offline nccb

  • Expert
  • ****
  • Posts: 1,145
  • 1974 CB750 Four
Re: Valve Inspection Covers Source
« Reply #14 on: January 22, 2013, 04:11:45 PM »
oh, thought it was a couple bucks more.  Does Honda supply the o-ring?
Logged
Pages: [1]   Go Up
« previous next »