« previous next »
Pages: [1]   Go Down

Author Topic: Speedo/Tach gauge overlays  (Read 1043 times)

0 Members and 1 Guest are viewing this topic.

Offline 2wheeltripn

  • Full Member
  • *
  • Posts: 9
Speedo/Tach gauge overlays
« on: January 25, 2013, 09:31:34 AM »
Hey everyone, first post but Ive been on this forum for quite some time and the info Ive found on here has been fantastic! Im well into a CB550k project and need new gauge overlays. The ones on ebay wont work for me, the space between the trip and odometer on my speedo is only 3/4 inch. The only other ones Ive found are on Lossa but Id like a more stock look. Any ideas?
Logged

Offline bjbuchanan

  • Master
  • *****
  • Posts: 2,276
Re: Speedo/Tach gauge overlays
« Reply #1 on: January 25, 2013, 09:52:05 AM »
There us a guy on here someone will chime in

Considered nice replacements that the board is selling?
Logged
The dirty girl-1976 cb750k, Ebay 836, Tracy bodykit
Round top carbs w/ 38 pilots, middle needle position, airscrew 7/8ths out, 122 main jet
Stock airbox w/ drop in K&N, Hooker 4-1

Don't trust me alone with a claw hammer and some pliers

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: Speedo/Tach gauge overlays
« Reply #2 on: January 25, 2013, 09:54:58 AM »
seller 000egor000 on ebay...he has overlays and new faceplates.
http://www.ebay.com/sch/000EGOR000/m.html?_ipg=50&_sop=12&_rdc=1

he's also a forum member but i dont remember his user name.
<===i use his new face plates
« Last Edit: January 25, 2013, 10:22:05 AM by flybox1 »
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline 2wheeltripn

  • Full Member
  • *
  • Posts: 9
Re: Speedo/Tach gauge overlays
« Reply #3 on: January 25, 2013, 10:28:03 AM »
The ones he has had on ebay for a while now dont work with mine, the screw holes and cutouts are off.  Found out the hard way...   
Logged

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: Speedo/Tach gauge overlays
« Reply #4 on: January 25, 2013, 10:47:23 AM »
how come they dont work?
were you specific enough with the year of you 550 gauge?
are you positive of the year?

i bet you could re-sell the ones that dont work here on the board...
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline egor

  • Full Member
  • *
  • Posts: 92
  • I love bacon!
Re: Speedo/Tach gauge overlays
« Reply #5 on: March 11, 2013, 08:15:16 AM »
Just an FYI...recently changed my ebay user name to main-jet-moto
Logged
04' Ducati Monster 620ie (sold)
75' CB550f Super Sport

Offline Harsh

  • Expert
  • ****
  • Posts: 1,103
  • 74 CB750 and two 72 CB350's
Re: Speedo/Tach gauge overlays
« Reply #6 on: March 11, 2013, 10:02:43 AM »
Another guy here makes tham as well, BCBarker.  He made mine and can make them pretty much however you want.



Logged
Pages: [1]   Go Up
« previous next »