« previous next »
Pages: [1] 2 3 ... 20   Go Down

Author Topic: Alternator Up Grade 32amps  (Read 98389 times)

0 Members and 1 Guest are viewing this topic.

Offline anders288

  • Enthusiast
  • **
  • Posts: 189
Alternator Up Grade 32amps
« on: February 07, 2013, 12:04:35 PM »
  Hi
I have been working on a 32amps and 45amps Alternator up grade. The 32amp one is ready for road testing.

The 45amp one still need a few thing dune to it. The stock rotor weights 5 lbs 12 oz the 32amp rotor weights

2 lbs 4oz.
« Last Edit: September 12, 2013, 02:47:01 PM by Gordon »
Logged

Offline iron_worker

  • Master
  • *****
  • Posts: 2,081
Re: Altenator Up Grade 32amps
« Reply #1 on: February 07, 2013, 12:09:49 PM »
Wow. This is very cool.

How much do you expect this kit to cost? (assuming you're planning to sell)

What is roughly the ouput of the stock alt?

IW
Logged

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: Altenator Up Grade 32amps
« Reply #2 on: February 07, 2013, 12:17:48 PM »
Quote from: iron_worker on February 07, 2013, 12:09:49 PM
Wow. This is very cool.

How much do you expect this kit to cost? (assuming you're planning to sell)

What is roughly the ouput of the stock alt?

IW
Yes, agreed.

I have the same questions.
Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline anders288

  • Enthusiast
  • **
  • Posts: 189
Re: Altenator Up Grade 32amps
« Reply #3 on: February 07, 2013, 12:26:13 PM »
Quote from: iron_worker on February 07, 2013, 12:09:49 PM
Wow. This is very cool.

How much do you expect this kit to cost? (assuming you're planning to sell)

What is roughly the ouput of the stock alt?

IW
  The stock alternator out put is 17amps. not sure how much it will cost yet. It Will be flywheel
                                                                                                                                        stator
                                                                                                                                        stator mount
                                                                                                                                        crank taper adapter
                                                                                                                                        regulator
                                                                                                                                        new regulator plugs
                                                                                                                                        new wiring
                                                                                                                                        installation
Logged

Offline Ricky_Racer

  • Master
  • *****
  • Posts: 1,598
Re: Altenator Up Grade 32amps
« Reply #4 on: February 07, 2013, 01:00:48 PM »
Anders, can the alternator cover be shortened with your planned kit? Thanks. RR
Logged
I was put on Earth to accomplish a certain number of things. Now I'm so far behind, I'll never die!

Offline anders288

  • Enthusiast
  • **
  • Posts: 189
Re: Altenator Up Grade 32amps
« Reply #5 on: February 07, 2013, 01:11:00 PM »
Quote from: Ricky_Racer on February 07, 2013, 01:00:48 PM
Anders, can the alternator cover be shortened with your planned kit? Thanks. RR
As you can see in the photo there is a lot of space in the cover and a differant space used with a differant cover
the stock cover walls are papered end the mount holes location for the stator is critical
I think the 32amp alt will work on the 500,550,350 and 400 also.
Logged

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: Altenator Up Grade 32amps
« Reply #6 on: February 07, 2013, 01:18:31 PM »
Quote from: Ricky_Racer on February 07, 2013, 01:00:48 PM
Anders, can the alternator cover be shortened with your planned kit? Thanks. RR

If these will work with a shortened cover i'm in for sure, I need more output for my fuel injected 1000cc build.... 8)

Also, i can't believe, with all the talent on this forum, that this hasn't been done as a kit already.... :o
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline Ricky_Racer

  • Master
  • *****
  • Posts: 1,598
Re: Altenator Up Grade 32amps
« Reply #7 on: February 07, 2013, 01:23:48 PM »
Quote from: anders288 on February 07, 2013, 01:11:00 PM
Quote from: Ricky_Racer on February 07, 2013, 01:00:48 PM
Anders, can the alternator cover be shortened with your planned kit? Thanks. RR
As you can see in the photo there is a lot of space in the cover and a differant space used with a differant cover
the stock cover walls are papered end the mount holes location for the stator is critical
I think the 32amp alt will work on the 500,550,350 and 400 also.

Thanks, Anders. If this kit doesn't require machining the crank snout and will also fit into a reasonable budget, I'm definitely interested as well. RR
Logged
I was put on Earth to accomplish a certain number of things. Now I'm so far behind, I'll never die!

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: Altenator Up Grade 32amps
« Reply #8 on: February 07, 2013, 01:25:07 PM »
RR: Couldn't the stock cover be modified with a tapered panel welded on the edge closes to the pavement. A completely fresh cover would be a handful to create, getting the placement of the holes, etc.

As to why it hasn't been done already, maybe its a technology thing?

To the extent anders would feel comfortable doing so, I'd like 20 words or less on how it works and why now rather than ten years ago?
Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline anders288

  • Enthusiast
  • **
  • Posts: 189
Re: Altenator Up Grade 32amps
« Reply #9 on: February 07, 2013, 01:26:15 PM »
Quote from: Retro Rocket on February 07, 2013, 01:18:31 PM
Quote from: Ricky_Racer on February 07, 2013, 01:00:48 PM
Anders, can the alternator cover be shortened with your planned kit? Thanks. RR

If these will work with a shortened cover I'm in for sure, I need more output for my fuel injected 1000cc build.... 8)

Also, i can't believe, with all the talent on this forum, that this hasn't been done as a kit already.... :o

      I'm sure you have herd the one about time and money.
Logged

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: Altenator Up Grade 32amps
« Reply #10 on: February 07, 2013, 01:36:19 PM »
Quote from: anders288 on February 07, 2013, 01:26:15 PM
Quote from: Retro Rocket on February 07, 2013, 01:18:31 PM
Quote from: Ricky_Racer on February 07, 2013, 01:00:48 PM
Anders, can the alternator cover be shortened with your planned kit? Thanks. RR

If these will work with a shortened cover I'm in for sure, I need more output for my fuel injected 1000cc build.... 8)

Also, i can't believe, with all the talent on this forum, that this hasn't been done as a kit already.... :o

      I'm sure you have herd the one about time and money.


Yes, but some of us don't care.... ;D   Have you seen the billet blocks Mike Reick is making..? {i have one of those as well...}  :P
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline anders288

  • Enthusiast
  • **
  • Posts: 189
Re: Altenator Up Grade 32amps
« Reply #11 on: February 07, 2013, 01:43:23 PM »
Quote from: MCRider on February 07, 2013, 01:25:07 PM
RR: Couldn't the stock cover be modified with a tapered panel welded on the edge closes to the pavement. A completely fresh cover would be a handful to create, getting the placement of the holes, etc.

As to why it hasn't been done already, maybe its a technology thing?

To the extent anders would feel comfortable doing so, I'd like 20 words or less on how it works and why now rather than ten years ago?
 

          An Alternator  out put is mainly controlled by it's magnetic field and it's almost imposable to pull the stator out of the

         flywheel and if the end of you finger gets in between the cover and engine when it's being install  your going to need a bandaid.

          And it only weighs 2 lbs 4 oz 
Logged

Offline anders288

  • Enthusiast
  • **
  • Posts: 189
Re: Altenator Up Grade 32amps
« Reply #12 on: February 07, 2013, 01:44:31 PM »
Quote from: TwoTired on February 07, 2013, 01:37:54 PM
Do you have any performance curves or duty cycle info on the unit?  Conversion efficiencies?

At what RPM is that 32 amp peak?

Cheers,
      Max out put 5K
Logged

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: Altenator Up Grade 32amps
« Reply #13 on: February 07, 2013, 01:46:34 PM »
Quote from: MCRider on February 07, 2013, 01:25:07 PM
RR: Couldn't the stock cover be modified with a tapered panel welded on the edge closes to the pavement. A completely fresh cover would be a handful to create, getting the placement of the holes, etc.


No need to create another cover Ron, just cut some out of the original cover and tig it back up, seen it done before mate.... ;)
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline anders288

  • Enthusiast
  • **
  • Posts: 189
Re: Altenator Up Grade 32amps
« Reply #14 on: February 07, 2013, 01:47:18 PM »
Quote from: Retro Rocket on February 07, 2013, 01:36:19 PM
Quote from: anders288 on February 07, 2013, 01:26:15 PM
Quote from: Retro Rocket on February 07, 2013, 01:18:31 PM
Quote from: Ricky_Racer on February 07, 2013, 01:00:48 PM
Anders, can the alternator cover be shortened with your planned kit? Thanks. RR

If these will work with a shortened cover I'm in for sure, I need more output for my fuel injected 1000cc build.... 8)

Also, i can't believe, with all the talent on this forum, that this hasn't been done as a kit already.... :o

      I'm sure you have herd the one about time and money.


Yes, but some of us don't care.... ;D   Have you seen the billet blocks Mike Reick is making..? {i have one of those as well...}  :P

        Yes I have seen  Mike's bike I'm going to install one on his bike
Logged

Offline anders288

  • Enthusiast
  • **
  • Posts: 189
Re: Altenator Up Grade 32amps
« Reply #15 on: February 07, 2013, 01:53:19 PM »
Quote from: Retro Rocket on February 07, 2013, 01:46:34 PM
Quote from: MCRider on February 07, 2013, 01:25:07 PM
RR: Couldn't the stock cover be modified with a tapered panel welded on the edge closes to the pavement. A completely fresh cover would be a handful to create, getting the placement of the holes, etc.



               I would want to have a rigid welding  fixture to hold everything in place if I was going to do it.

No need to create another cover Ron, just cut some out of the original cover and tig it back up, seen it done before mate.... ;)
Logged

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: Altenator Up Grade 32amps
« Reply #16 on: February 07, 2013, 02:51:30 PM »
Let us know as soon as you have an idea of pricing... ;)
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,563
  • Big ideas....
Re: Altenator Up Grade 32amps
« Reply #17 on: February 07, 2013, 03:48:23 PM »
Quote from: anders288 on February 07, 2013, 01:47:18 PM
Quote from: Retro Rocket on February 07, 2013, 01:36:19 PM
Quote from: anders288 on February 07, 2013, 01:26:15 PM
Quote from: Retro Rocket on February 07, 2013, 01:18:31 PM
Quote from: Ricky_Racer on February 07, 2013, 01:00:48 PM
Anders, can the alternator cover be shortened with your planned kit? Thanks. RR

If these will work with a shortened cover I'm in for sure, I need more output for my fuel injected 1000cc build.... 8)

Also, i can't believe, with all the talent on this forum, that this hasn't been done as a kit already.... :o

      I'm sure you have herd the one about time and money.


Yes, but some of us don't care.... ;D   Have you seen the billet blocks Mike Reick is making..? {i have one of those as well...}  :P

        Yes I have seen  Mike's bike I'm going to install one on his bike
Yup....that's the plan. Anders has been over my house several times. He is a great fella with a huge amount of bike knowledge. He has dedicated a good amount of time to this project. He has other good ideas too but....time and money. ;D ;D ;D
Logged
Owner of the "Million Dollar CB"

Offline andy750

  • Really Old Timer ...
  • *******
  • Posts: 7,938
Re: Altenator Up Grade 32amps
« Reply #18 on: February 07, 2013, 04:00:13 PM »
I have seen the rotors and spacers that Anders has been machining and its very good quality and well worth the money -  Ill be road testing the rotors once the snow melts. Cant wait! Anders has a lot of talent...

cheers
Andy
Logged
Current bikes
1. CB750K4: Long distance bike, 17 countries and counting...2001 - Trans-USA-Mexico, 2003 - European Tour, 2004 - SOHC Easy Rider Trip , 2008 - Adirondack Tour 2-up , 2013 - Tail of the Dragon Tour , 2017: 836 kit install and bottom end rebuild. And rebirth: http://forums.sohc4.net/index.php/topic,173213.msg2029836.html#msg2029836
2. CB750/810cc K2  - road racer with JMR worked head 71 hp
3. Yamaha Tenere T700 2022

Where did you go on your bike today? - http://forums.sohc4.net/index.php?topic=45183.2350

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,563
  • Big ideas....
Re: Altenator Up Grade 32amps
« Reply #19 on: February 07, 2013, 04:02:50 PM »
Quote from: anders288 on February 07, 2013, 01:43:23 PM
Quote from: MCRider on February 07, 2013, 01:25:07 PM
RR: Couldn't the stock cover be modified with a tapered panel welded on the edge closes to the pavement. A completely fresh cover would be a handful to create, getting the placement of the holes, etc.

As to why it hasn't been done already, maybe its a technology thing?

To the extent anders would feel comfortable doing so, I'd like 20 words or less on how it works and why now rather than ten years ago?
 

          An Alternator  out put is mainly controlled by it's magnetic field and it's almost imposable to pull the stator out of the

         flywheel and if the end of you finger gets in between the cover and engine when it's being install  your going to need a bandaid.

          And it only weighs 2 lbs 4 oz
It is sobering when that cover is grabbed by that magnetic force. ::) I hate messing with modern alternator covers.
Logged
Owner of the "Million Dollar CB"

Offline faux fiddy

  • Just becaus I'm the second post on the pissed off thread doesn't mean I'm an
  • Old Timer
  • ******
  • Posts: 4,812
  • bike in a box
Re: Altenator Up Grade 32amps
« Reply #20 on: February 08, 2013, 04:20:53 AM »
Quote from: anders288 on February 07, 2013, 12:04:35 PM
   The stock rotor weights 5 lbs 12 oz the 32amp rotor weights
2 lbs 4oz.


That's a pretty significant weight loss. Anyone racing these things would want one unlesss they go straight discharge and remove it all.
Logged
^^^^^^^/l^^^^^^^^^^^^^^/l^^^
. . ______/ l_________________/  l
<'  '  '   '  o .  . . . . . . .................(
 ' VVVVV'   ')))))____>-''''''''''''''''''\  l
' . vvvv_   -              -                 \/

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,563
  • Big ideas....
Re: Altenator Up Grade 32amps
« Reply #21 on: February 08, 2013, 07:39:12 AM »
Quote from: rotortiller link=topic=117735.msg1329677#msg1329677 date=1360316985

RT

PS[quote
duty cycle info on the unit?

Most of us expect you intend the thing to run at least a full tank of fuel.  :)
Many common bikes today run 30-40 amp alternator ratings.
[/quote]
 The biggest problem is getting a reg/rect to handle the extra without overheating. The first generation hayabusa's had a problem with overheating. Guy's are switching to ZX-14 parts.
Logged
Owner of the "Million Dollar CB"

Offline Bankerdanny

  • Eventually I will be old enough in reality to be
  • Really Old Timer ...
  • *******
  • Posts: 7,626
  • Endeavor to persevere
Re: Altenator Up Grade 32amps
« Reply #22 on: February 08, 2013, 09:54:53 AM »
This dovetails nicely with Mooshy's post about using heated clothing. With an upgrade like this running a heated vest should not be a problem.
Logged
"The problem with quotes on the Internet is that you never know if they're true" - Abraham Lincoln

Current: '76 CB750F. Previous:  '75 CB550F, 2007 Yamaha Vino 125 Scooter, '75 Harley FXE Superglide, '77 GL1000, '77 CB550k, '68 Suzuki K10 80, '68 Yamaha YR2, '69 BMW R69S, '71 Honda SL175, '02 Royal Enfield Bullet 500, '89 Yamaha FJ1200

Offline andy750

  • Really Old Timer ...
  • *******
  • Posts: 7,938
Re: Altenator Up Grade 32amps
« Reply #23 on: February 08, 2013, 10:06:15 AM »
Quote from: Bankerdanny on February 08, 2013, 09:54:53 AM
This dovetails nicely with Mooshy's post about using heated clothing. With an upgrade like this running a heated vest should not be a problem.

Exactly!
Logged
Current bikes
1. CB750K4: Long distance bike, 17 countries and counting...2001 - Trans-USA-Mexico, 2003 - European Tour, 2004 - SOHC Easy Rider Trip , 2008 - Adirondack Tour 2-up , 2013 - Tail of the Dragon Tour , 2017: 836 kit install and bottom end rebuild. And rebirth: http://forums.sohc4.net/index.php/topic,173213.msg2029836.html#msg2029836
2. CB750/810cc K2  - road racer with JMR worked head 71 hp
3. Yamaha Tenere T700 2022

Where did you go on your bike today? - http://forums.sohc4.net/index.php?topic=45183.2350

Offline 74750k4

  • Hot Shot
  • ***
  • Posts: 459
Re: Altenator Up Grade 32amps
« Reply #24 on: February 08, 2013, 12:05:36 PM »
Logged
Pages: [1] 2 3 ... 20   Go Up
« previous next »