Topic: wheels from z900/z1000, can they fit my cb750f1

[Jeff.Saunders]

THEY WILL FIT!   

You mean, "they can be made to fit"   Anything can if you have the tools and skill....     When the OP said Z900, i assumed he meant spoked wheels, Z9's were all spoked...

THe KZ900-B1 LTD model came with cast wheels.  That bike was a North American model only and was assembled in Lincoln, Nebraska.

The early KZ 900/1000 models used an 18mm rear axle and a 17mm front axle.

Sometimes it's just a simple task of changing bearings to accomodate a different axle - sometimes it's MUCH more complex.

[fr33man]

now i found another rear - this time its a lester 20300 - that should fit a goldwing.. the price is good and im again wondering if it would be possible to fit it on my 76 cb750f1 - ive found that it should be a 20400 that should be the proper one, but anyone knows what it would take to mod the goldwing wheel =))

hope there is help out here again ..

[andrewk]

Goldwings are shaft drive, so you would have to figure out the drive side of things, not sure if that is possible or not.

The brake side, however, should be good to go, as the early GL shares the same rear caliper setup as the early 750F.

[fr33man]

Ok, tnx for the answers everybody.. good to have you all here

Sendt fra min HTC One X med Tapatalk2

[Jiminy Indy]

Over $1200 for a set of lester mags??? I've never paid that much for a bike before, let alone the wheels. Oh my golly!!!

[goldarrow]

Over $1200 for a set of lester mags??? I've never paid that much for a bike before, let alone the wheels. Oh my golly!!!

Don't be surprise. People have different interest and taste, and there's a market for it. 

[goldarrow]

If you are still in the market for mag wheels.  This may be a nice set for you

http://item.mobileweb.ebay.com/viewitem?itemId=400340007351&cmd=VIDESC

[fr33man]

Tnx goldarrow, but I want a 16" rear.. could have been a good alternative though


Sendt fra min HTC One X med Tapatalk2