« previous next »
Pages: [1]   Go Down

Author Topic: CB650 pilot screw o-ring/washer  (Read 1998 times)

0 Members and 2 Guests are viewing this topic.

iszekeres

  • Guest
CB650 pilot screw o-ring/washer
« on: July 18, 2006, 08:30:22 AM »
Just removed/cleaned the carbs on my 79 650, and noticed none of the pilot screws have their washer and o-ring installed.  I was wondering if anyone knew what sizes the washer and o-ring were, and if it was possible to get a pair for each carb without purchasing the entire gasket kit.....

Any help would be appreciated!

--ian
Logged

Offline crazypj

  • I'm brill, me
  • Old Timer
  • ******
  • Posts: 4,468
  • first 100,000 miles. 1977 CB550F
Re: CB650 pilot screw o-ring/washer
« Reply #1 on: July 18, 2006, 08:45:29 AM »
Dont know if Honda sells them individually but Suzuki use the same sizes as far as I know and they do.
 Dont know if this is for the 'o' ring or washer but if you can find a Suzuki dealer and give him this part number you can then get the other parts you need
13295-26E00
Should be able to work out what bike its for and check on microfiche or computer.
PJ
Logged
I fake being smart pretty good
'you can take my word for it or argue until you find out I'm right'

iszekeres

  • Guest
Re: CB650 pilot screw o-ring/washer
« Reply #2 on: July 18, 2006, 11:27:13 AM »
I will give that part number a try and see how it works out....if anyone has a set of four o-rings and washers unused from a carb rebuild I would be happy to buy them.....

Thanks!
--ian
Logged

gasguzler

  • Guest
Re: CB650 pilot screw o-ring/washer
« Reply #3 on: July 18, 2006, 12:57:59 PM »
I purchased one pilot screw with o-ring from a dealer recently, ('79 CB650 as well) so I know for a fact that you order them without the whole carb kit. I will check my old bills tonight to see if I cant get a part #.
Logged
Pages: [1]   Go Up
« previous next »