« previous next »
Pages: [1]   Go Down

Author Topic: cam tower seals on a 77 750K  (Read 937 times)

0 Members and 1 Guest are viewing this topic.

Offline katman

  • Enthusiast
  • **
  • Posts: 207
cam tower seals on a 77 750K
« on: February 25, 2013, 05:30:47 AM »
Putting head back on my 77K. took everything off in order and labeled it. the cam holder I had in a bag with these 2 small
O rings(laying on head to the right in pic.) and I forgot were they actual go under cam holder. Any Help
would be appreciated.
Logged

Offline bryanj

  • Really Old Timer ...
  • *******
  • Posts: 13,989
  • CB500 Number 1000036
Re: cam tower seals on a 77 750K
« Reply #1 on: February 25, 2013, 08:23:52 AM »
If you look at the cam holder the oil feed hole is duplicated at each end so that they are not handed, on the head is a recess to fit an O ring in to seal the outlet hole from leaking---Hope that makes sense mate
Logged
Semi Geriatric ex-Honda mechanic and MOT tester (UK version of annual inspection). Garage full of "projects" mostly 500/4 from pre 73 (no road tax in UK).

Remember "Its always in the last place you look" COURSE IT IS YOU STOP LOOKIN THEN!

Offline katman

  • Enthusiast
  • **
  • Posts: 207
Re: cam tower seals on a 77 750K
« Reply #2 on: February 25, 2013, 10:18:57 AM »
Yes, if you look at the pic I have the 2 new O rings(one each tower) allready in the recess. These 2 were in the bag with the tower.
The bag with tower 3-4 has the same 2 O rings in them. Could the go at the 2 center holes.
Logged

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: cam tower seals on a 77 750K
« Reply #3 on: February 25, 2013, 10:34:48 AM »
Quote from: katman on February 25, 2013, 10:18:57 AM
Yes, if you look at the pic I have the 2 new O rings(one each tower) allready in the recess. These 2 were in the bag with the tower.
The bag with tower 3-4 has the same 2 O rings in them. Could the go at the 2 center holes.
2 ORings per tower. As per Bryan: recesses in head are obvious. The inboard ones contain the oil orifices. The outboard ones are blanks.

You do not have an ORing in the outboard blanks. Even though they are blanks they are still necessary.
« Last Edit: February 25, 2013, 10:37:32 AM by MCRider »
Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline katman

  • Enthusiast
  • **
  • Posts: 207
Re: cam tower seals on a 77 750K
« Reply #4 on: February 25, 2013, 12:16:03 PM »
Okay, 2 O-rings per tower. I know goes around the orfice. is my other arrow the right location
Logged

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: cam tower seals on a 77 750K
« Reply #5 on: February 25, 2013, 12:16:57 PM »
yup.
Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline katman

  • Enthusiast
  • **
  • Posts: 207
Re: cam tower seals on a 77 750K
« Reply #6 on: February 25, 2013, 12:27:47 PM »
Thanks!
Logged
Pages: [1]   Go Up
« previous next »