« previous next »
Pages: [1]   Go Down

Author Topic: Finally bought a set..  (Read 1296 times)

0 Members and 5 Guests are viewing this topic.

Offline toytuff

  • "watching the pinheads"
  • Old Timer
  • ******
  • Posts: 4,349
Finally bought a set..
« on: March 04, 2013, 05:39:52 pm »
Always wanted a set of JIS screwdrivers.

After reading the article in this months issue of VJMC it was a must have.

tt

Logged

Offline madmtnmotors

  • When did I get to be a
  • Really Old Timer ...
  • *******
  • Posts: 6,088
  • Sunny Central Florida
Re: Finally bought a set..
« Reply #1 on: March 04, 2013, 06:04:41 pm »
Quote from: toytuff on March 04, 2013, 05:39:52 pm
Always wanted a set of JIS screwdrivers.

After reading the article in this months issue of VJMC it was a must have.

tt



Your fasteners will thank you in the form of longer useful service life. I bought two sets, so when I lose one I still have one left! Even got the tips for the impact driver too.
Logged
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                          
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Offline toytuff

  • "watching the pinheads"
  • Old Timer
  • ******
  • Posts: 4,349
Re: Finally bought a set..
« Reply #2 on: March 04, 2013, 06:13:42 pm »
Quote from: madmtnmotors on March 04, 2013, 06:04:41 pm
Quote from: toytuff on March 04, 2013, 05:39:52 pm
Always wanted a set of JIS screwdrivers.

After reading the article in this months issue of VJMC it was a must have.

tt



Your fasteners will thank you in the form of longer useful service life. I bought two sets, so when I lose one I still have one left! Even got the tips for the impact driver too.

I saw those impact drivers. Work good?

tt
Logged

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,229
  • Central Texas
Re: Finally bought a set..
« Reply #3 on: March 04, 2013, 06:17:36 pm »
Wilbur, got a link to the impact bits?

John - did not get a PM about ....??
Logged
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline switchum

  • Old Timer
  • ******
  • Posts: 2,910
    • Studio Switchum facebook page
Re: Finally bought a set..
« Reply #4 on: March 04, 2013, 06:32:53 pm »
I always wanted impact bits of JIS screw driver. I did a lot of research in Japanese and I was not able to find any. You gotta give us the link.
Logged

Offline RAFster122s

  • I feel like a really really
  • Really Old Timer ...
  • *******
  • Posts: 12,278
  • SOHC4 member # 2605
Re: Finally bought a set..
« Reply #5 on: March 04, 2013, 06:45:55 pm »
Doesn't McMaster Carr have the JIS bits and screwdrivers? Was thinking they did...

Isn't the #3 ISO bit the same as the JIS of corresponding size on most of our Honda CBs?  '69-80 era and beyond...  I thought that Honda had switched over to the ISO head standard by the late 60s.

David
Logged
David- back in the desert SW!

Offline toytuff

  • "watching the pinheads"
  • Old Timer
  • ******
  • Posts: 4,349
Re: Finally bought a set..
« Reply #6 on: March 04, 2013, 07:17:29 pm »
Quote from: Stev-o on March 04, 2013, 06:17:36 pm
Wilbur, got a link to the impact bits?

John - did not get a PM about ....??

Seems PM is not working. Nothing here.

tt
Logged

Offline toytuff

  • "watching the pinheads"
  • Old Timer
  • ******
  • Posts: 4,349
Re: Finally bought a set..
« Reply #7 on: March 04, 2013, 07:25:07 pm »
Quote from: switchum on March 04, 2013, 06:32:53 pm
I always wanted impact bits of JIS screw driver. I did a lot of research in Japanese and I was not able to find any. You gotta give us the link.

www.vesseltools.com

Motorcycle set.

tt
Logged

Offline madmtnmotors

  • When did I get to be a
  • Really Old Timer ...
  • *******
  • Posts: 6,088
  • Sunny Central Florida
Re: Finally bought a set..
« Reply #8 on: March 05, 2013, 09:55:00 am »
Logged
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                          
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Offline toytuff

  • "watching the pinheads"
  • Old Timer
  • ******
  • Posts: 4,349
Re: Finally bought a set..
« Reply #9 on: March 05, 2013, 02:07:44 pm »
First time using them today. Fantastic!

Best set of screwdrivers I ever purchased.  8)

tt
Logged

Offline switchum

  • Old Timer
  • ******
  • Posts: 2,910
    • Studio Switchum facebook page
Re: Finally bought a set..
« Reply #10 on: March 06, 2013, 05:26:11 am »
Logged

Offline LoVel

  • Yes, I remember your mother well. She was quite the
  • Hot Shot
  • ***
  • Posts: 260
  • 1972 CB500 four
Re: Finally bought a set..
« Reply #11 on: March 06, 2013, 06:12:38 am »
Glad you finally got a set.  Was starting to worry.
Logged
I'm an individual,  just like everyone else.

Offline mrrch

  • Hot Shot
  • ***
  • Posts: 652
Re: Finally bought a set..
« Reply #12 on: March 12, 2013, 11:31:01 am »
I bought a set of screwdrivers from ebay around Christmas and I do like how they do fit tighter in the screw heads.
Logged
my build

1977 CB750K WITH 1976 CB750F ENGINE

Offline Duke McDukiedook

  • Space Force 6 Star General
  • Really Old Timer ...
  • *******
  • Posts: 12,690
  • Wish? Did somebody say wish?
Re: Finally bought a set..
« Reply #13 on: March 12, 2013, 01:47:33 pm »
Quote from: RAFster122S on March 04, 2013, 06:45:55 pm
Doesn't McMaster Carr have the JIS bits and screwdrivers? Was thinking they did...

Isn't the #3 ISO bit the same as the JIS of corresponding size on most of our Honda CBs?  '69-80 era and beyond...  I thought that Honda had switched over to the ISO head standard by the late 60s.

David

By the time the 750 rolled around pretty much all of the screws went to ISO except for some screws usually on the carburetors. The way to know if it is a JIS screw is if there is a recessed dot on the top of the screw head.
 
Logged
"Well, Mr. Carpetbagger. We got somethin' in this territory called the Missouri boat ride."   Josey Wales

"It's Baltimore, gentlemen. The gods will not save you." Ervin Burrell

CB750 K3 crat | (2) 1986 VFR750F
Pages: [1]   Go Up
« previous next »