Topic: Tyre to rim sizes

[trueblue]

I found a chart that outlines the size tyres to rim width, I can't upload it direct because it is too large but here is a link 

http://www.mtsac.edu/~cliff/storage/gs/Motorcycle_Rim_Width_Tire_Size_Chart.pdf#page=1&zoom=auto,63,732

[peter400four]

Struth!
I wish I'd looked on the forum before I hunted for hours on the internet looking for tyre to rim sizes. Guess what, I ended up finding this exact table. Just what I needed to see what tyres I'd need for my 500/4 historic racer project and its 2.5" front and 3.5" rear (WHEN, I finally find the right three-spoke wheel, that is!)

[Tuche]

Sorry to dig up this post again, but I'm new here...

Can use on my CB500/4 3.00 on front and 3.50 on rear wheel? With 110mm front and 130mm rear tires. Is it possible?

[Rocketman]

Each manufacturer will have rim width recommendations for their tires.  Here is a link to Avon and Continental's web page for non-DOT race tires with rim recommendations. 

http://www.avonmoto.com/products/non-dot-race-tires

http://www.continental-tires.com/motorcycle/tires/motorcycle-tires/classic-classic-racing/contiroadattack2cr

[eli]

I found a chart that outlines the size tyres to rim width, I can't upload it direct because it is too large but here is a link 

http://www.mtsac.edu/~cliff/storage/gs/Motorcycle_Rim_Width_Tire_Size_Chart.pdf#page=1&zoom=auto,63,732

Link is dead  Anyone with a jpg, pdf or similar?

[eli]

Found it myself...

http://www.eliasnet.de/motorcycle_rim_width_tire_size_chart.pdf