Author Topic: My snotty filthy new Bridgeport milling machine (Read 25673 times)

754 · « **Reply #125 on:** October 27, 2013, 02:34:06 PM »

Die punches..
What is that green fixture just in front of the mag base?

FrankenFrankenstuff · « **Reply #126 on:** October 27, 2013, 02:42:10 PM »

Original SB Micro stop for the lathe. It is seized, might free up w/oil. I was going too put on bay.

754 · « **Reply #127 on:** October 27, 2013, 04:14:45 PM »

Pm what you want as is..

754 · « **Reply #128 on:** October 27, 2013, 05:15:06 PM »

70% of that you will probably need, at times.
You got room still my shop has 2.5 times the density of yours..

Stev-o · « **Reply #129 on:** October 27, 2013, 05:21:11 PM »

Wow. Guessing your wifey doesn't go down there. Mine would freak out.

FrankenFrankenstuff · « **Reply #130 on:** October 27, 2013, 06:30:52 PM »

She calls me "the cellar dweller". I have another area that was my clean, packaging, electronics, sit down work spot....she evicted me. Now its my daughters craft area. I need to clean out a lot of machine stuff and make room for clean packaging station. She us freaking out about our electric bill though. I have been playing on the mill way too much. Electric bill this month is double from last! Oops.

754 · « **Reply #131 on:** October 27, 2013, 07:35:27 PM »

Tell her its wwwwaaaaayyyyyyyyy cheaper than
A commercial rates
B shop rent and overhead.....

FrankenFrankenstuff · « **Reply #132 on:** October 30, 2013, 05:59:12 PM »

754 sorry but I gave the micro stop to a friend for his lathe. He bent me some cafe loooops for it and some other machine stuff.

FrankenFrankenstuff · « **Reply #133 on:** October 30, 2013, 05:59:44 PM »

I am putting the dumore on ebaay tonight.

FrankenFrankenstuff · « **Reply #134 on:** October 30, 2013, 06:53:42 PM »

http://pages.ebay.com/link/?nav=item.view&id=231085239262
Here is the listing for the dumore grinder. Hopefully sells for more than $60.

754 · « **Reply #135 on:** November 10, 2013, 09:49:12 AM »

Told ya that grinder was worth some bux.. Did it pay for the lathe?

Stev-o · « **Reply #136 on:** November 10, 2013, 02:05:49 PM »

Quote from: 754 on November 10, 2013, 09:49:12 AM

Told ya that grinder was worth some bux.. Did it pay for the lathe?

Holy crap....$456?!! Good for you jomama....

scottly · « **Reply #137 on:** November 10, 2013, 06:34:45 PM »

WOW!

754 · « **Reply #138 on:** November 10, 2013, 07:37:46 PM »

Ow did the other stuff do ?

FrankenFrankenstuff · « **Reply #139 on:** November 22, 2013, 08:01:51 PM »

I have been doing more dumpster diving....here is me new box of booty, saved from the scrapyard. There was a ton of tooling, lathe bits, carbide teeth, chuck teeth, collets...I just grabbed anything I knew I could use or that said "Hardinge" or ""Brown and Sharpe". I even had the guy loading the dumpster "accidentally" dump over a 55 gal barrel that was full of bits. I found a brand new stepper motor, some old Bridgeport handles and some wrenches. Frigging scrap. The Harding collets I pulled out are brand new. I have no use for them and will put them on eBay.

WTF is this giant 10 tooth mutha?

I have another mystery bit as well, it is Brown and Sharpe with a center drill in a collet with a handle? Pics soon.

An entire case of knurling wheels. All brand new in indexed drawers.

Those arbor presses I got are Yuasa #0 little guys.

Frigging scrap. He told me it was worth more because it was all "old metal".

My hands are pretty cut up from finding end mills...... it was better than X-Mas.!

FrankenFrankenstuff · « **Reply #140 on:** November 22, 2013, 08:02:07 PM »

FrankenFrankenstuff · « **Reply #141 on:** November 22, 2013, 08:08:45 PM »

Here are the knurling wheels and the mystery Brown and Sharpe center drill fixture. I will try to sell most of this on eBay to help fund my growing bills/debt/growing family.

I have fallen in love with "V" blocks. Must have about 6 now. All different. All so precise and perfect.

754 · « **Reply #142 on:** November 22, 2013, 09:31:59 PM »

Big cutter is a shell mill
..can I have it?

FrankenFrankenstuff · « **Reply #143 on:** November 23, 2013, 07:37:42 PM »

I have a bag of 5 Allied spade drill inserts. Found an amazon page and...WOW! $74 a piece... checked eBay and, doesn't look like they sell. I have a growing collection of tools that are valuable but worthless..

Frank the mill is a Pratt and Whitney 3". Anything to trade or couple bucks plus shipping?
http://www.amazon.com/ALLIED-MACHINERY-10234-0116-SERIES-UNIVERSAL/dp/B00DHMBACA

scottly · « **Reply #144 on:** November 23, 2013, 07:52:15 PM »

What does the back side of the shell mill look like? In the pic, it looks like it may have slots to lock into the tool-holder. I have a tool holder for my CNC Bridgeport that has lugs that might work with that, but the holder may be too small. What is the ID of the mill where it meets the holder? (Just curious, Frank.

)

754 · « **Reply #145 on:** November 23, 2013, 08:05:41 PM »

It looks like 11/2 inch hole to me.
The B&S toolblock maybe be turret lathe tooling. The collets in the plastic container, are they B&S 21,s.. Look like mini versions of what my Herbert turret lathe uses..

FrankenFrankenstuff · « **Reply #146 on:** November 23, 2013, 08:08:25 PM »

1.24" ID and the slot is .5" ×.3"

One other tool I forgot to mention is a Zagan collet fixture. I figured it would be handy for something....I have never seen one used before. Had to have it though.

Hoping to sell those Hardinge collets on the bay.

FrankenFrankenstuff · « **Reply #147 on:** November 23, 2013, 08:15:01 PM »

Before before before before

After after after after

Just madness.

scottly · « **Reply #148 on:** November 23, 2013, 08:18:13 PM »

Thanks. I'll measure the holder..

scottly · « **Reply #149 on:** November 24, 2013, 05:01:36 PM »

My holder is for a 1.000" ID tool, and the lugs are .370 wide. Keep your eyes open for this style QC 30 holders, commonly used on CNC series 1 Bridgeports, as well as acura-flex style collets.

News:

Author Topic: My snotty filthy new Bridgeport milling machine (Read 25673 times)