Author Topic: what faces to Re-face? CB550  (Read 393 times)

0 Members and 1 Guest are viewing this topic.

Offline Habbyshaw

  • Full Member
  • *
  • Posts: 24
what faces to Re-face? CB550
« on: March 27, 2013, 09:08:42 am »
Hi everyone,

I recently disassembled my CB550 motor and will soon be reassembling it. Upon inspection I noticed the face of the bottom end cylinder has been unevenly ground down by a previous owner. I contacted a local machine shop and they are able to help me reface and hone the cylinder for $200. Is this a standard fee?

The real question is... Should I also reface the other surfaces? :Top and bottom of top end, Valve cover, Valves etc.  The bike has 30k miles and some pretty serious gasket adhesion. I could with a little eblow grease get the surfaces pretty clean.

any advice welcome

Thanks

 

;
Honda