Author Topic: The story of Zinc, and why SOHC4 engines need it in oil. (Read 39006 times)

dave the welder · « **Reply #75 on:** July 20, 2016, 06:27:44 PM »

thanks

RAFster122s · « **Reply #76 on:** October 20, 2016, 03:27:52 AM »

Beware...one post member... I smell a malicious website

Scott S · « **Reply #77 on:** October 20, 2016, 03:33:40 AM »

Quote from: RAF122S on October 20, 2016, 03:27:52 AM

Beware...one post member... I smell a malicious website

Link removed.

Nagoshak · « **Reply #78 on:** April 04, 2018, 01:32:04 PM »

I have a cb500 four and wondered what the best oil to use, I'm in the uk

RAFster122s · « **Reply #79 on:** April 05, 2018, 09:26:28 AM »

ThatThere are lots of oil threads and it is a common "flamebait" topic that comes up when people's strong opinions are voiced.

Look at this thread and determine if you want to use one of the recommended MOTORCYCLE oils which are discussed. Individuals have discussed what they have observed after switching to a better oil with a good zinc package.
AVOID energy conserving and friction modifier oils as they are bad for our pushrod sohc motors. After SF the zinc started dropping for all oils except those for motorcycles BUT not all motor cycle oils have the zinc and phosphorus and other additives that help our motors not wear quickly. So, read the thread, take notes for those you can easily get, belray and motul come to mind. Spectro being a us oil make. Through Amazon you can get just about anything if you wish to pay the price to get it to you...

Good luck
and ask questions about specifics and it is better...

HondaMan · « **Reply #80 on:** April 05, 2018, 06:55:54 PM »

Quote from: Nagoshak on April 04, 2018, 01:32:04 PM

I have a cb500 four and wondered what the best oil to use, I'm in the uk

In the UK, the Motul and Castrol XLR have a good reputation for these engines.

Marks78 · « **Reply #81 on:** June 17, 2018, 03:17:16 PM »

Got to looking for Spectro and found Dennis Kirk sells a good variety of Spectro products by the liter or case. Free shipping on orders over $89.

RAFster122s · « **Reply #82 on:** June 17, 2018, 05:28:46 PM »

Does a gallon or case of oil have to ship under a hazmat label? If so, they may have it shipped free except the up charge on the hazmat label...would be nice to think it would ship free. Buy 90 of oil to protect against future price increases. Let's not debate current and future value of money.

Marks78 · « **Reply #83 on:** June 18, 2018, 10:18:38 AM »

Just ordered a case from Dennis Kirk and there was no mention of hazmat shipping charges. They did say it could not be shipped via Air mail. Shipping was free for over $89 order. Supposed to arrive at my place this Thursday.

slikwilli420 · « **Reply #84 on:** June 18, 2018, 10:47:14 AM »

Im going to stick up for Rotella T4 and ZDDP plus. Ken at Cycle X recommended the ZDDP to be added to a gallon of Rotella. I am running this combination in my race bike this year and so far no shifting issues or clutch slipping. Comes out to about $23 for an oil change plus filter. I can change it more often now (race bike and all) and not have the wallet hurt nearly as bad.

HondaMan · « **Reply #85 on:** June 19, 2018, 06:17:16 PM »

Quote from: slikwilli420 on June 18, 2018, 10:47:14 AM

Im going to stick up for Rotella T4 and ZDDP plus. Ken at Cycle X recommended the ZDDP to be added to a gallon of Rotella. I am running this combination in my race bike this year and so far no shifting issues or clutch slipping. Comes out to about $23 for an oil change plus filter. I can change it more often now (race bike and all) and not have the wallet hurt nearly as bad.

Yeah, no kidding:3 years ago I bought a case of the BelRay EXL at the peak of the prices, $32 per gallon alone!

piefairy · « **Reply #86 on:** June 23, 2018, 09:25:23 PM »

I have been reading this topic and still I am not sure how much additive to put in my oil... I am running Pennzoil high millage 10w-30. I do not have alot of miles on the bike, but I get a crunch in shifting which is what led me here. zddp+ seems to be the choice on here, but is one bottle (4oz) to much?

Thanks in advance

Just bought your book Hondaman! Thanks for all the effort!

slikwilli420 · « **Reply #87 on:** June 24, 2018, 07:46:12 PM »

Quote from: piefairy on June 23, 2018, 09:25:23 PM

I have been reading this topic and still I am not sure how much additive to put in my oil... I am running Pennzoil high millage 10w-30. I do not have alot of miles on the bike, but I get a crunch in shifting which is what led me here. zddp+ seems to be the choice on here, but is one bottle (4oz) to much?

Thanks in advance

Just bought your book Hondaman! Thanks for all the effort!

Is that car oil? If so get rid of it. I add one small bottle of zinc to each gallon.

HondaMan · « **Reply #88 on:** July 02, 2018, 06:36:01 PM »

Quote from: piefairy on June 23, 2018, 09:25:23 PM

I have been reading this topic and still I am not sure how much additive to put in my oil... I am running Pennzoil high millage 10w-30. I do not have alot of miles on the bike, but I get a crunch in shifting which is what led me here. zddp+ seems to be the choice on here, but is one bottle (4oz) to much?

Thanks in advance

Just bought your book Hondaman! Thanks for all the effort!

That oil is FAR too light for any of these SOHC4 engines. If it is the 750, use 20w50 unless it's wintertime. You can sneak by for short-haul in-town riding on the smaller Fours with 15w40 or 20w40 diesel oils, but even 10w40 is too light for summer use in any of these bikes.

Gurp · « **Reply #89 on:** July 03, 2018, 09:22:46 AM »

Quote from: HondaMan on June 19, 2018, 06:17:16 PM

Quote from: slikwilli420 on June 18, 2018, 10:47:14 AM
Im going to stick up for Rotella T4 and ZDDP plus. Ken at Cycle X recommended the ZDDP to be added to a gallon of Rotella. I am running this combination in my race bike this year and so far no shifting issues or clutch slipping. Comes out to about $23 for an oil change plus filter. I can change it more often now (race bike and all) and not have the wallet hurt nearly as bad.

Yeah, no kidding:3 years ago I bought a case of the BelRay EXL at the peak of the prices, $32 per gallon alone!

Hondaman what is your opinion on Rotella T6 for a 550/500 4?

HondaMan · « **Reply #90 on:** July 24, 2018, 06:53:32 PM »

Quote from: Gurp on July 03, 2018, 09:22:46 AM

Quote from: HondaMan on June 19, 2018, 06:17:16 PM
Quote from: slikwilli420 on June 18, 2018, 10:47:14 AM
Im going to stick up for Rotella T4 and ZDDP plus. Ken at Cycle X recommended the ZDDP to be added to a gallon of Rotella. I am running this combination in my race bike this year and so far no shifting issues or clutch slipping. Comes out to about $23 for an oil change plus filter. I can change it more often now (race bike and all) and not have the wallet hurt nearly as bad.

Yeah, no kidding:3 years ago I bought a case of the BelRay EXL at the peak of the prices, $32 per gallon alone!

Hondaman what is your opinion on Rotella T6 for a 550/500 4?

I don't know what the T6 type is?

slikwilli420 · « **Reply #91 on:** July 26, 2018, 11:55:28 AM »

T6 is the full synthetic version to T4. Run the T4 as its a bit cheaper, still a great oil. I know guys like expensive motorcycle oils but I really dont think its necessary. I change my oil (especially with a still very new engine) after every race weekend. The Rotella has the required specs for our engines, and boosted with more zinc makes for a great recipe.

HondaMan · « **Reply #92 on:** July 27, 2018, 06:21:01 PM »

Quote from: slikwilli420 on July 26, 2018, 11:55:28 AM

T6 is the full synthetic version to T4. Run the T4 as its a bit cheaper, still a great oil. I know guys like expensive motorcycle oils but I really dont think its necessary. I change my oil (especially with a still very new engine) after every race weekend. The Rotella has the required specs for our engines, and boosted with more zinc makes for a great recipe.

Certainly the "more zinc" part is a good thing for ours: I haven't yet been able to keep the synthetics inside my 750 yet(!) because it seeps out thru the paper gaskets after a while. It washes off pretty easily, though.

Our member Ofreen has been using the Golden Spectro synthetic for a long time: he only has a small weep somewhere that comes and goes. When I used the synthetics in mine, it made puddles under it, though, mostly from the left side as it was parked, and the cam coverall around. It sure was smooth-shifting, though!

Jerry Rxman Griffin aka MuthaF'er · « **Reply #93 on:** July 28, 2018, 11:09:54 AM »

Mark,

Have you tried Kenny's gaskets from CycleX? Coated metal. I just picked up a bunch as I needed a valve cover replacement.

ofreen · « **Reply #94 on:** July 29, 2018, 05:45:00 PM »

Quote from: HondaMan on July 27, 2018, 06:21:01 PM

Our member Ofreen has been using the Golden Spectro synthetic for a long time: he only has a small weep somewhere that comes and goes.

Just a small correction. Golden Spectro is no doubt fine oil, but I have been using the Spectro Heavy Duty 20w50 all these years.

RAFster122s · « **Reply #95 on:** July 29, 2018, 06:20:59 PM »

Somehow Greg has good results with the VTwin oriented Spectro. That is contrary to conventional wisdom that the VTwin motor oil additives aren't ideal for the 4 stroke motors.

seanbarney41 · « **Reply #96 on:** July 29, 2018, 07:29:17 PM »

Quote from: RAF122S on July 29, 2018, 06:20:59 PM

Somehow Greg has good results with the VTwin oriented Spectro. That is contrary to conventional wisdom that the VTwin motor oil additives aren't ideal for the 4 stroke motors.

vtwins are 4 strokes dude

ofreen · « **Reply #97 on:** July 29, 2018, 07:30:07 PM »

This thread is beginning to go in circles.

http://forums.sohc4.net/index.php/topic,119643.msg1756849.html#msg1756849
http://forums.sohc4.net/index.php/topic,119643.msg1756589.html#msg1756589
http://forums.sohc4.net/index.php/topic,119643.msg1756595.html#msg1756595

scottly · « **Reply #98 on:** July 29, 2018, 08:18:46 PM »

Quote from: ofreen on July 29, 2018, 05:45:00 PM

Just a small correction. Golden Spectro is no doubt fine oil, but I have been using the Spectro Heavy Duty 20w50 for over 160,000 miles without any issues or major engine work.

Fixed that for you, Greg.

HondaMan · « **Reply #99 on:** July 30, 2018, 06:15:02 PM »

Quote from: Jerry Rxman Griffin aka MuthaF'er on July 28, 2018, 11:09:54 AM

Mark,

Have you tried Kenny's gaskets from CycleX? Coated metal. I just picked up a bunch as I needed a valve cover replacement.

Nope, haven't seen those in real life yet. If it's a head gasket, watch the thickness? Or, a base gasket, same thing...

News:

Author Topic: The story of Zinc, and why SOHC4 engines need it in oil. (Read 39006 times)