« previous next »
Pages: [1]   Go Down

Author Topic: "How much rust is TOO MUCH"  (Read 2244 times)

0 Members and 1 Guest are viewing this topic.

Offline derelicte

  • Enthusiast
  • **
  • Posts: 133
  • '74 CB750
"How much rust is TOO MUCH"
« on: April 18, 2013, 03:58:30 PM »
Apologies for again posting on an often discussed topic.  Problem is though there are a lot of threads, they are archived with dead pics. 

I need a replacement rear rim.  This is what I finally found.  The outside cleaned up remarkably well, but not so nice under the rim strip once I cut off the old tire.  Here I've hit it with a wire brush, but plan to buy a wire wheel attachment for the drill and then spray some rust converting primer I bought at lowes before respoking.  What do you think?  From the threads I was reading people were salvaging some pretty rusty rims but there were no pics for reference.  None of the spoke holes look to have lost thickness but the entire inner surface of the rim had rusted..











Logged

Offline Vinhead1957

  • Expert
  • ****
  • Posts: 1,196
Re: "How much rust is TOO MUCH"
« Reply #1 on: April 18, 2013, 04:19:35 PM »
The question is can you stop it to be worthy of reuse?  You have to relace the wheel why not worry about with a new rim?  If it is a casual rider and you will not keep in the stable for long, treat it with rust converter and paint.
Logged

Offline Powderman

  • Master
  • *****
  • Posts: 2,465
    • Creative Candy Powder Coating
Re: "How much rust is TOO MUCH"
« Reply #2 on: April 18, 2013, 04:47:24 PM »
Those wheels are more than salvageable. A good commercial blaster will clean them right up and a good coating powder and they would be new new, they would just show the pitting inside which isn't seen. If they are throwing those out send them to me.
Logged

Offline wowbagger

  • Not much of an
  • Expert
  • ****
  • Posts: 853
Re: "How much rust is TOO MUCH"
« Reply #3 on: April 18, 2013, 05:09:21 PM »
Yeah, media blasting or a simple soak in white vinegar for a couple days will take most of that right off. I just did the vinegar soak to a bunch of my trim pieces. After 24 hours submerged and a good rinse with a stiff brush they came completely clean.
Logged

paul_D

  • Guest
Re: "How much rust is TOO MUCH"
« Reply #4 on: April 18, 2013, 06:45:18 PM »
Quote from: wowbagger on April 18, 2013, 05:09:21 PM
Yeah, media blasting or a simple soak in white vinegar for a couple days will take most of that right off. I just did the vinegar soak to a bunch of my trim pieces. After 24 hours submerged and a good rinse with a stiff brush they came completely clean.

Looks like I'm investing in a lot of vinegar this summer !
Logged

Offline kghost

  • Really Old Timer ...
  • *******
  • Posts: 6,855
  • www.facebook.com/RetroMecanicaAustralia
Re: "How much rust is TOO MUCH"
« Reply #5 on: April 18, 2013, 11:10:12 PM »
Treat it, prime it, paint it. Period
Logged
Stranger in a strange land

Offline dave500

  • Really Old Timer ...
  • *******
  • Posts: 17,022
  • WHAT?no gravy?
Re: "How much rust is TOO MUCH"
« Reply #6 on: April 19, 2013, 03:07:35 AM »
ha!man,,youve got no worries with those rims,,they are solid!,,id add some pics of some truely rusty rims i have but id hate to make you sick!
« Last Edit: April 19, 2013, 03:09:23 AM by dave500 »
Logged

Offline Duanob

  • Bold Timer
  • Old Timer
  • ******
  • Posts: 4,009
  • Gotcha!
Re: "How much rust is TOO MUCH"
« Reply #7 on: April 19, 2013, 02:40:50 PM »
Do they make rim liners for motorcycle rims? They use them on bicycle rims.
Logged
"Just because you flush a boatload of money down the toilet, doesn't make the toilet worth more",  My Stepfather the Unknown Poet

1974 CB360T
1976 CB550K2 Resurrected
1976 CB550F2 Barn Find
1979 CX500 VG "HONDA-GUZZI"
2007 Moto Guzzi Breva 750ie
2015 BMW F700GS
Another 1976 CB550K Cafe?

  __o
_- \_<,
(*) /' (*)

Offline Xnavylfr

  • Expert
  • ****
  • Posts: 1,102
  • Beers, Babes and bikes since 1965
Re: "How much rust is TOO MUCH"
« Reply #8 on: April 19, 2013, 03:50:27 PM »
Yes they make rim liners for MC rims. Look around the inner tube area of catalogs!!



Xnavylfr(CHUCK)
Logged

Offline derelicte

  • Enthusiast
  • **
  • Posts: 133
  • '74 CB750
Re: "How much rust is TOO MUCH"
« Reply #9 on: April 25, 2013, 07:10:22 PM »
Thanks!  Perfect, glad I could save it along with the $$.  Here it is laced and with the 110 rear tire that came in the mail today. 



Rather than start a new thread I thought I'd just ask here.  The axle spacer from the comstar wheel is leaving a gap with spoked wheel installed.  Will any spacers I find for a '69-76 work?  It was a 130 rear tire on there, any reason to think the PO might've messed with the swingarm somehow?  Last, can I get just some spacers without getting ripped again on ebay $40 for an axle rod?





Logged

Offline Brantley

  • Drano
  • Hot Shot
  • ***
  • Posts: 314
Re: "How much rust is TOO MUCH"
« Reply #10 on: April 25, 2013, 09:55:41 PM »
Yeah, any drum brake model spacer will work.
Logged

Offline jamesbekman

  • Hot Shot
  • ***
  • Posts: 380
Re: "How much rust is TOO MUCH"
« Reply #11 on: April 26, 2013, 07:32:52 AM »
Yea white vinegar or apple cider vinegar is awesome, phosphoric acid is pretty amazing as well for quicker results...
Logged
Pages: [1]   Go Up
« previous next »