« previous next »
Pages: [1]   Go Down

Author Topic: Need rings/Anyone used TRW 811cc kit?  (Read 1565 times)

0 Members and 1 Guest are viewing this topic.

Offline 68grandprix

  • Enthusiast
  • **
  • Posts: 120
Need rings/Anyone used TRW 811cc kit?
« on: July 28, 2006, 12:58:46 AM »
I just picked up an NOS TRW piston kit # L 2424F off Ebay. The pistons are 3mm over, forged, 10.5:1  for a Cb750.  I need rings, and Hastings said they had some rings that would work, but I was wondering if anyone knew of rings in the sizes that I need in a set I can just buy. Hastings emailed me this long list of things that worked out to about $100. I need 1.5mm compression rings and 2.8mm oil rings. Also, has anyone had any experience with this kit? The pistons look pretty nice to me, but maybe someone can tell me a little more about them. Thanks, Jimmy.
Logged

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,565
  • Big ideas....
Re: Need rings/Anyone used TRW 811cc kit?
« Reply #1 on: July 28, 2006, 05:16:05 AM »
Total Seal also can supply rings.
Logged
Owner of the "Million Dollar CB"

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,914
  • Bought her new 4/75
Re: Need rings/Anyone used TRW 811cc kit?
« Reply #2 on: July 28, 2006, 10:30:21 AM »
I run a Yoshi 810/811/812 kit. When I took mine apart I sent a piston to Hastings to ID rings. Really nice folks! They ID'd it as using 68-72 (not sure of last year) CB350 rings and sent my piston back at No Charge and just told me to go to the dealer. I don't know that yours would be the same rings as mine but I wouldn't hesitate to go with Hastings.
Jerry
Logged
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline 68grandprix

  • Enthusiast
  • **
  • Posts: 120
Re: Need rings/Anyone used TRW 811cc kit?
« Reply #3 on: July 29, 2006, 01:59:17 AM »
How do you like your piston kit? Was there a pretty good power increase (if you ever rode the bike stock) ? Thanks, Jimmy
Logged

gizmo

  • Guest
Re: Need rings/Anyone used TRW 811cc kit?
« Reply #4 on: July 29, 2006, 07:58:43 AM »
hi anyone know where i can get an 836 yoshi ring set for a cb750 k6 i might get round to posting a couple of pics as long as you all don't mind a modified singl cam i know its sacralidge but if you saw the bike when i did you'd understand the decision
Logged

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,914
  • Bought her new 4/75
Re: Need rings/Anyone used TRW 811cc kit?
« Reply #5 on: July 29, 2006, 10:37:11 PM »
Quote from: 68grandprix on July 29, 2006, 01:59:17 AM
How do you like your piston kit? Was there a pretty good power increase (if you ever rode the bike stock) ? Thanks, Jimmy

My bike was stock when I blew it up back in 1976. It was really tuned in sweet. So well that I was blowing the carbon out to run a 900 Kaw heads up with much confidence. Missed 2nd gear and the rest was history. When I installed the 810 I also went with a Yoshi Daytona (race) cam and S & W high performance valve springs hoping that I wouldn't blow it up again. The 810 kit really helped my bottom end. Much less down shifting around town due to increased torque & HP. I attribute the top end increase more to the cam.
Logged
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline paulages

  • Old Timer
  • ******
  • Posts: 3,876
  • 1976 cb735
    • DOOMTOWN RIDERS P.R.M.C.
Re: Need rings/Anyone used TRW 811cc kit?
« Reply #6 on: May 10, 2007, 12:45:45 PM »
hey-- i'm installing the same pistons, but can't find clearance specs. do you know what bore you went with?
Logged
paul
SOHC4 member #1050

1974 CB550 (735cc)
1976 CB550 (590cc) road racer
1973 CB750K3
1972 NORTON Commando Combat
1996 KLX650 R
Pages: [1]   Go Up
« previous next »