Author Topic: How to support carbs  (Read 1489 times)

0 Members and 4 Guests are viewing this topic.

Offline knobbs

  • Full Member
  • *
  • Posts: 31
How to support carbs
« on: May 13, 2013, 05:29:37 PM »
 Any one running pods on the carbs come up with an inventive way to support the carbs. (75 cb750)
Kj

Offline dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,489
Re: How to support carbs
« Reply #1 on: May 14, 2013, 05:48:12 AM »
Ive had pods on my bike for years and havent had any sort of support on them,no issues at all
mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3

Offline mcpuffett

  • Master
  • *****
  • Posts: 2,354
Re: How to support carbs
« Reply #2 on: May 14, 2013, 06:24:33 AM »
Same here pods and no support  ;) cheers Mick.
Honda CB750 KO 1970,   Honda VTX 1300 2006, Lancaster England.

Offline crazypj

  • I'm brill, me
  • Old Timer
  • ******
  • Posts: 4,467
  • first 100,000 miles. 1977 CB550F
Re: How to support carbs
« Reply #3 on: May 14, 2013, 07:58:08 AM »
I've found the carbs 'sink' over time and cause a rich mixture.
Used a small bungy cord to hold them up for test then made a spring hanger onto frame
I fake being smart pretty good
'you can take my word for it or argue until you find out I'm right'

Offline Bankerdanny

  • Eventually I will be old enough in reality to be
  • Really Old Timer ...
  • *******
  • Posts: 7,626
  • Endeavor to persevere
Re: How to support carbs
« Reply #4 on: May 14, 2013, 08:20:06 AM »
I usually support mine with affirming statements like, "you atomized very well today" and "those jets work beautifully on you".
"The problem with quotes on the Internet is that you never know if they're true" - Abraham Lincoln

Current: '76 CB750F. Previous:  '75 CB550F, 2007 Yamaha Vino 125 Scooter, '75 Harley FXE Superglide, '77 GL1000, '77 CB550k, '68 Suzuki K10 80, '68 Yamaha YR2, '69 BMW R69S, '71 Honda SL175, '02 Royal Enfield Bullet 500, '89 Yamaha FJ1200

Offline lucky

  • Really Old Timer ...
  • *******
  • Posts: 6,717
Re: How to support carbs
« Reply #5 on: May 14, 2013, 08:31:46 AM »
A black ZIP TIE around the top frame tube works very well . Hardly noticeable.

Offline BPellerine

  • Master
  • *****
  • Posts: 2,222
Re: How to support carbs
« Reply #6 on: May 14, 2013, 12:01:35 PM »
I have seen guys make small alloy straps that go from carb plate on an angle to the airbox tabs on the frame solid and looks good if you make nice straps.bill
1978 CB 750K ard and webers
another anfob

Offline Duke McDukiedook

  • Space Force 6 Star General
  • Really Old Timer ...
  • *******
  • Posts: 12,690
  • Wish? Did somebody say wish?
Re: How to support carbs
« Reply #7 on: May 14, 2013, 12:12:24 PM »
Putting the airbox on.
"Well, Mr. Carpetbagger. We got somethin' in this territory called the Missouri boat ride."   Josey Wales

"It's Baltimore, gentlemen. The gods will not save you." Ervin Burrell

CB750 K3 crat | (2) 1986 VFR750F

Offline bjbuchanan

  • Master
  • *****
  • Posts: 2,276
Re: How to support carbs
« Reply #8 on: May 14, 2013, 02:29:17 PM »
Putting the airbox on.

Literally exactly what popped in to my head
The dirty girl-1976 cb750k, Ebay 836, Tracy bodykit
Round top carbs w/ 38 pilots, middle needle position, airscrew 7/8ths out, 122 main jet
Stock airbox w/ drop in K&N, Hooker 4-1

Don't trust me alone with a claw hammer and some pliers

Offline Gman

  • Hot Shot
  • ***
  • Posts: 307
Re: How to support carbs
« Reply #9 on: May 15, 2013, 06:29:07 AM »
I usually support mine with affirming statements like, "you atomized very well today" and "those jets work beautifully on you".
;D ;D ;D ;D ;D

Haaaaa - you beat me to it.  I was going to go with something along the lines of "banana hammock".  Great minds...
'76 CB550K
Stock airbox, MotoGPWerks 4-1, HondaMan ignition, Lesters

Offline lucky

  • Really Old Timer ...
  • *******
  • Posts: 6,717
Re: How to support carbs
« Reply #10 on: May 15, 2013, 09:26:51 AM »
I like the look of the stock airbox. It fills in that space.

Offline brandEn

  • Old Timer
  • ******
  • Posts: 3,205
Re: How to support carbs
« Reply #11 on: May 15, 2013, 09:27:56 AM »
A black ZIP TIE around the top frame tube works very well . Hardly noticeable.
+1

Offline brandEn

  • Old Timer
  • ******
  • Posts: 3,205
Re: How to support carbs
« Reply #12 on: May 15, 2013, 09:29:19 AM »
I like the look of the stock airbox. It fills in that space.

Lucky you are breaking new ground. A hardtail chopper with an airbox! ;)
Bike looks great man.

Offline 70CB750

  • Labor omnia vincit improbus.
  • Really Old Timer ...
  • *******
  • Posts: 14,805
  • Northern Virginia
Re: How to support carbs
« Reply #13 on: May 15, 2013, 09:36:14 AM »
I like the look of the stock airbox. It fills in that space.

Pretty bike, Lucky!
Prokop
_______________
Pure Gas - find ethanol free gas station near you

I love it when parts come together.

Dorothy - my CB750
CB750K3F - The Red
Sidecar


CB900C

2006 KLR650