Author Topic: Portland Oregon SOHC owners (Read 70612 times)

mlinder · « **Reply #325 on:** January 04, 2011, 01:52:03 PM »

You could set up your Notrun right next to Joes bike, Paul.

That way you two could catch up on old times.

the.barrage.pdx · « **Reply #326 on:** January 16, 2011, 11:31:26 AM »

Fairly noob in PDX looking to expand my working knowledge. Willing to clean, sweep, make your coffee, roll your cigs, or anything else in exchange for working/wrenching knowledge of motorbikes.

Anyone in PDX willing to share?

Grnrngr · « **Reply #327 on:** January 16, 2011, 07:17:54 PM »

Quote from: the.barrage.pdx on January 16, 2011, 11:31:26 AM

Fairly noob in PDX looking to expand my working knowledge. Willing to clean, sweep, make your coffee, roll your cigs, or anything else in exchange for working/wrenching knowledge of motorbikes.

Anyone in PDX willing to share?

heh...you mean like parkin one of mine at your house so you could work on it for me?

pm sent...

mlinder · « **Reply #328 on:** January 18, 2011, 11:48:37 AM »

Quote from: the.barrage.pdx on January 16, 2011, 11:31:26 AM

Fairly noob in PDX looking to expand my working knowledge. Willing to clean, sweep, make your coffee, roll your cigs, or anything else in exchange for working/wrenching knowledge of motorbikes.

Anyone in PDX willing to share?

Every Wednesday night, about 5:30, PM me for location.

C'mon by. It's 5 or 6 blocks from Doomtown.

Grnrngr · « **Reply #329 on:** February 03, 2011, 02:14:28 PM »

Quote from: nokrome on January 02, 2011, 04:46:20 PM

check it out portland people !!
http://theonemotorcycleshow.com/index.html

Bumpin it up case anyone forgot.....
Day after tomorrow........

NickC · « **Reply #330 on:** February 04, 2011, 04:13:20 PM »

Man, why do i always have to be underway for this stuff?
On a different note, anyone have a line on some CL350 parts? One of my wife's mufflers is rusted through......

paulages · « **Reply #331 on:** February 07, 2011, 10:09:37 PM »

Quote from: Nick@lockitup on February 04, 2011, 04:13:20 PM

Man, why do i always have to be underway for this stuff?
On a different note, anyone have a line on some CL350 parts? One of my wife's mufflers is rusted through......

I have a couple sets... not sure if they're better or not. Gimme a ring when you're in town.

Paul

NickC · « **Reply #332 on:** February 09, 2011, 07:47:06 PM »

Paul, when are you usually at the shop? I'll be in town Sat. morning.

paulages · « **Reply #333 on:** February 10, 2011, 01:19:14 AM »

Quote from: Nick@lockitup on February 09, 2011, 07:47:06 PM

Paul, when are you usually at the shop? I'll be in town Sat. morning.

There's not really a "usually"... M-F I'm often there, say 11-7. I'll PM you my number though, and feel free to call/text me Saturday to see if I'm around.

paulages · « **Reply #334 on:** April 13, 2011, 10:24:07 PM »

Oi! Portland Oregon people. It's time for DOOMTOWN's spring party. Oh, and what do you know... it's my birthday again!

From 2-6, DOOMTOWN and EMPIRE CLASSICS will be hosting the FFMC annual chili cookoff, after which our party will kick off. We will have slow races, beer, and a few punk bands. The noise needs to end by 10 and I will kick everyone out at midnight. The chili cookoff will benefit a couple friends with recent riding injuries, and the party will benefit all who come.

Saturday, 4/16/2011
ALL (non douchebags) WELCOME!

Grnrngr · « **Reply #335 on:** September 06, 2011, 09:36:59 PM »

Hey! Godzilla's coming....I can't go get him, so I've been commisioned to pm everyone in the Portland area....anyone up for the ride to Boise or thereabouts?

Little_Horse · « **Reply #336 on:** September 07, 2011, 04:55:09 PM »

When would you be leaving?

Grnrngr · « **Reply #337 on:** September 10, 2011, 08:36:04 PM »

Looks like Mickey6 nis going to head for Boise from Roseburg maybe as soon as monday evening..don't think a time or route have been set yet...

paulages · « **Reply #338 on:** September 10, 2011, 08:46:35 PM »

Wish I could do it guys... way too much stuff on my plate.

Little_Horse · « **Reply #339 on:** September 11, 2011, 08:51:47 PM »

I have a friend I wanted to visit over there but for me the trip would have to land over a weekend

NecroPsyChroNauTron · « **Reply #340 on:** March 04, 2012, 03:05:21 AM »

Bummer I didn't get my bike before I moved.
Born and raised in Portland, but didn't buy my first bike till I moved here to San Francisco.
Planning on riding back up in not too long though(and periodically after that), so maybe I'll see some of you around.

Grnrngr · « **Reply #341 on:** March 04, 2012, 07:03:36 PM »

Give us a holla when you do, if you can make it, the 25th of this month is the Flying Fifteen M/C Annual Spring Opener, May 8 is the Sang Froid Riding Club's Spring Opener

Anonypotomous · « **Reply #342 on:** May 09, 2015, 11:08:37 AM »

Bump! Anyone still alive in here?!

subaruski · « **Reply #343 on:** May 23, 2016, 03:15:37 PM »

Is there still a SOHC get together/group in Portland?

SanDogDewey · « **Reply #344 on:** January 23, 2022, 07:49:22 PM »

Anyone use TFC Plating Company in Portland? Looking for chrome and zinc plating. Patrick

kputtman12 · « **Reply #345 on:** May 04, 2023, 05:45:50 AM »

I am just wondering if we could revive this post!!!!

I am in Beaverton, Oregon. I have a 1980 CB650 and a 1981 CB650. Looking to see if anyone is still around and willing to help a newbie!!!

Ken

ofreen · « **Reply #346 on:** May 04, 2023, 06:30:31 AM »

Welcome to the forum from Idaho. All the Oregonians I used to converse with seem to have long since moved on.

SanDogDewey · « **Reply #347 on:** May 04, 2023, 08:09:32 AM »

I’m out here on the coast in Seaside. What do you need help with Ken?

kputtman12 · « **Reply #348 on:** May 04, 2023, 11:28:45 AM »

Quote from: SanDogDewey on May 04, 2023, 08:09:32 AM

I’m out here on the coast in Seaside. What do you need help with Ken?

Hi San Dog - I will try to simplify my answer to what I am needing currently:
1. I really want to see a running 1981 CB650C so I can just see, touch, inspect the set-up. It can be difficult at times to understand the properly set-up.
2. Wanted to get to know others in the area, to discuss parts, shops, upgrades

Specific needs
1. carb, vacuum lines, airbox set-up for a 1981 CB650c
2. Lighting Diagram and process to change to LED turn signals, headlight and tail/brake light. I have the electrical diagram and can follow it, but it does take a little knowledge to understand.

I know all these topics are covered somewhere, but someone on the forumn or internet, but I sometimes I am not sure the proper question to ask or how to phrase what I actually need.

Ken

SanDogDewey · « **Reply #349 on:** May 04, 2023, 02:10:35 PM »

I dont have a CB650, but if I did I'd start with a factory service manual. I have one for just about every bike I own. It'll cost you $100 or so, but it will save you a lot of time scouring forums.

LED lights will usually need a different blinker unit so the turn signals work. Some bike use the front turn signals as running lights, but that can be worked out.

Did you buy a none running project bike?

News:

Author Topic: Portland Oregon SOHC owners (Read 70612 times)

the.barrage.pdx