Author Topic: 1976 GL1000  (Read 3765 times)

0 Members and 1 Guest are viewing this topic.

Offline Rsnip988

  • Expert
  • ****
  • Posts: 1,104
1976 GL1000
« on: September 29, 2006, 02:39:48 AM »
I found a 1976 GL1000 GOldwing with full fairing, trunk and bags, bumpers, radio floorboards loaded, only 40,000 miles for $800, am I crazy or is this deal unreal? he says the only problem is that one of the valves is flooding when running...my guess is a carb rebuild one Sat morning would fix that up.  the only cosmetic i can see is a spot on the tank  near the seat where the PO drug his'her bot when getting off once

I think i must have to buy it as soon as possible, as the bidding ends in 16 hours

RKS
R.K.S.

1976 CB750 K6 Full

1976 CB750 K6 Cafe'ish

Offline 74cb750

  • Old Timer
  • ******
  • Posts: 3,420
    • old japanese parts and bikes
Re: 1976 GL1000
« Reply #1 on: September 29, 2006, 03:20:55 AM »
only advise I can give is have someone check it out personally
good luck
michel
Laugh at least once a day.
Life  $ucks, then you die.
You are entitled to your own opinions, but not your own facts.
God forces us to live with  non-believers to test our resolve.

Offline cben750f0

  • nothin draws attention like a classic bike!!
  • Master
  • *****
  • Posts: 1,612
  • '75 CB750F0 Gladstone NQLD OZ
Re: 1976 GL1000
« Reply #2 on: September 29, 2006, 04:51:21 AM »
even if you got it for $800, and its a bit tied, you could part it on ebay and make more than that... just a thought....


peace
you are never to old, to act like a kid... be safe
funny thing,chasing someone down hill on a bike 30 years older than theirs..
he said \\\\\\\'it was like watching a 250kg unguided weapon getting stuck up you bum\\\\\\\ http://www.bikepics.com/members/trixtrem/

Offline bill440cars

  • Feeling More & More,
  • Really Old Timer ...
  • *******
  • Posts: 12,358
  • Tryin' To Slow Down "Time"!
Re: 1976 GL1000
« Reply #3 on: September 29, 2006, 05:02:17 AM »


                   Are you figuring on keeping it loaded, if you can get it or will you build something similar to
           what kghost (and some others elsewhere on the web) did? If you're going to build it, you might
           ebay the excess stuff (fairing, bags, etc) and get some of your money back. Just a thought.
           Good Luck with your quest.
                                                              Later on, Bill
Member # 1969
PRAYERS ALWAYS FOR: Bre, Jeff & Virginia, Bear, Trevor & Brianna ( Close Friend's Daughter)
"Because HE lives, I can Face Tomorrow"                  
 You CAN Teach An Old Dog New Tricks, Just Takes A Little Bit Longer & A Lot More Patience!! 
             
Main Rides: '02 Durango, '71 Swinger & Dad's '93
                  Dakota LE 4x4 '66 CB77 & '72 SL350K2
Watch What You Step Into, It Could  End Up A Mess!

Offline dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,482
Re: 1976 GL1000
« Reply #4 on: September 29, 2006, 05:16:35 AM »
40 grand on a wing isnt much.
mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3

Offline scunny

  • Old Timer
  • ******
  • Posts: 4,618
  • don't call me expert
Re: 1976 GL1000
« Reply #5 on: September 29, 2006, 05:33:09 AM »
40,000 is bugger all for a well maintained motor. In NZED that price would be called a bargain.
past-cb100,ts250,cb500,cb500,gs1000,gs650g.phillips traveller
present-CB 650 retro
            VTR1000F3
           XL250S riverbed rocket
           TS250[sold]
           TS185[sold]
           XL125S[sold]
           MT50 (white)
           MT50 (red)[sold]
           KN250/XS400 project
           XR/XL250 bitsa under construction
           SL100[sold]
           XL250R
           pedal(pub bike) leaks oil
my gallery http://gallery.sohc4.net/members/personal/scunny

Honda CBer

  • Guest
Re: 1976 GL1000
« Reply #6 on: September 29, 2006, 05:54:06 AM »
Quote
40,000 is alot of miles.

Quote
40 grand on a wing isnt much.

nah, 40K on a GL1000 isnt that much... probably about time to change the timing belts, though... my father has a '76 with 50K--- starts right up WITH NO CHOKE (!) even if it has been sitting a few days... no smoke, etc, and still makes a wad of power (and boy do those slip-ons sound good)... recently had the fuel pump go bad, but that was an easy fix...
a good friend of mine has an '84 with 150K... also starts right up, with no smoke, etc... obvioulsy, the bike is maintained regularly...



Offline kghost

  • Really Old Timer ...
  • *******
  • Posts: 6,855
  • www.facebook.com/RetroMecanicaAustralia
Re: 1976 GL1000
« Reply #7 on: September 29, 2006, 07:40:45 AM »
Stranger in a strange land

Offline 78 k550

  • Master
  • *****
  • Posts: 2,479
Re: 1976 GL1000
« Reply #8 on: September 29, 2006, 08:23:19 AM »
40 isnt anything if the oil was changed. I have 70 on mine and all the guy's around here say its just getting broken in. They say there good for 150,000 :)
I would jump on it. There great bikes.

Paul
Paul
Littleton, CO

76/77 CB 750F, 
75 GL1000, (AKA GL1-242 NGWClub),
76 GL1000 LTD
84 GL1200 Standard
6 Bultaco's= 42, 49, 121, 152, 167, 188

Offline dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,482
Re: 1976 GL1000
« Reply #9 on: September 29, 2006, 08:30:52 AM »
Quote
40,000 is alot of miles.

Quote
40 grand on a wing isnt much.

nah, 40K on a GL1000 isnt that much... probably about time to change the timing belts, though... my father has a '76 with 50K--- starts right up WITH NO CHOKE (!) even if it has been sitting a few days... no smoke, etc, and still makes a wad of power (and boy do those slip-ons sound good)... recently had the fuel pump go bad, but that was an easy fix...
a good friend of mine has an '84 with 150K... also starts right up, with no smoke, etc... obvioulsy, the bike is maintained regularly...



yea,belts are a good idea.
mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3

Offline 78 k550

  • Master
  • *****
  • Posts: 2,479
Re: 1976 GL1000
« Reply #10 on: September 29, 2006, 08:59:31 AM »
Yup,
 belts, that should be the first piece of mind fix. If you break a belt you can cause major damage. Good luck on it, there great bikes. I have an early 75 model. Looking for another to customize. want to keep this original.

Paul
Paul
Littleton, CO

76/77 CB 750F, 
75 GL1000, (AKA GL1-242 NGWClub),
76 GL1000 LTD
84 GL1200 Standard
6 Bultaco's= 42, 49, 121, 152, 167, 188

Offline gregimotis

  • poet laureate; SOHC4.
  • Expert
  • ****
  • Posts: 784
Re: 1976 GL1000
« Reply #11 on: September 29, 2006, 09:50:11 AM »


73,000 on my f1 and no internal problems at all - maybe the clutch is getting close.  Seems to me that mileage isn't nearly as important as the bike's relationship with it's PO.
"To crush your enemies, to see them driven before you, and to hear the lamentations of their women."

Offline nickjtc

  • I was numero dieci
  • Old Timer
  • ******
  • Posts: 4,210
  • Yamaha XT500 'Gromit'
Re: 1976 GL1000
« Reply #12 on: September 29, 2006, 11:21:43 AM »
There is a lot of interest in those early 'Wings, especially if everything is original. I'd take off all of the non-Honda paraphernalia and get it back as close to original as possible.
Nick J. Member #3247

2008 Triumph Tiger 1050
1977 Suzuki GS750

"That which does not kill us reminds us to wear proper motorcycle clothing...."

Offline Rsnip988

  • Expert
  • ****
  • Posts: 1,104
Re: 1976 GL1000
« Reply #13 on: September 30, 2006, 12:20:07 PM »
It got away from me, but only for $910  (my fiance said i really didnt need 2 bikes and i should save my money for my plasma TV, So I opted for the TV)

restoring my 76' cb750 is keeping my busy enough lately

Thanks for all your imputs

rks
R.K.S.

1976 CB750 K6 Full

1976 CB750 K6 Cafe'ish

Offline kghost

  • Really Old Timer ...
  • *******
  • Posts: 6,855
  • www.facebook.com/RetroMecanicaAustralia
Re: 1976 GL1000
« Reply #14 on: September 30, 2006, 12:47:53 PM »
I have a TV...every once in a while I turn it on and watch the weather. ;D

Case its gonna rain when I plan on riding.

Tell the fiance that it keeps you home and out of the bars  ;D

If that fails tell her its an investment  ;D

Stranger in a strange land

racing33

  • Guest
Re: 1976 GL1000
« Reply #15 on: September 30, 2006, 03:36:30 PM »
.

Tell the fiance that it keeps you home and out of the bars  ;D

If that fails tell her its an investment  ;D


Yep. that works. Thats why my wife lets me have all the projects I want. ;D

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,912
  • Bought her new 4/75
Re: 1976 GL1000
« Reply #16 on: September 30, 2006, 07:31:35 PM »
Yup,
 belts, that should be the first piece of mind fix. If you break a belt you can cause major damage. Good luck on it, there great bikes. I have an early 75 model. Looking for another to customize. want to keep this original.

Paul

Paul,
I gotta say - your's is original !  ;D And pretty damn good too! Well, prehaps the pretty part might be overstated. ;).
You guys wanna try another ride this season? I'm back to part time employment so I can still ride.
Jerry
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline 78 k550

  • Master
  • *****
  • Posts: 2,479
Re: 1976 GL1000
« Reply #17 on: October 01, 2006, 08:03:36 AM »
Jerry,
Post up, i'm up for a ride anytime.

Paul
Paul
Littleton, CO

76/77 CB 750F, 
75 GL1000, (AKA GL1-242 NGWClub),
76 GL1000 LTD
84 GL1200 Standard
6 Bultaco's= 42, 49, 121, 152, 167, 188

Offline Rsnip988

  • Expert
  • ****
  • Posts: 1,104
Re: 1976 GL1000
« Reply #18 on: October 03, 2006, 02:10:52 AM »
Tell the fiance that it keeps you home and out of the barsĀ  ;D

If that fails tell her its an investmentĀ  ;)

oN THE OTHER hand the PLasma TV would keep me out of bars, (as would my alergy to alcohol)

I have already used the "investment" line to get this 76 CB750

Its all good, I didnt really need it anyway and i would have had to go 9 hours one way to pick it up anyway

RKS
R.K.S.

1976 CB750 K6 Full

1976 CB750 K6 Cafe'ish