Topic: honda oem carb kit 1976 750f

[KRONUS0100]

help.  in dire need of the part number for the full rebuild kit for 750f carbs 1976.  dont even feel like beginning the hassle with keyster or k&L.  thanks in advance

[harisuluv]

It doesn't exist.  You can get OEM gasket kits, which will have your o-rings, float bowl and cap gasket.  That's it.  You can make your own OEM rebuild kit if you buy all the components a la carte idle or main jet at about $5 a pop, a set of float valves for about 60-70 and a set of needles for about 70. 

You can probably re use a lot of what you have already if it is in good condition.  Or you can buy a rebuild kit of your choice and just not use the needles, which are inferior to even used OEM.

[KRONUS0100]

thanks.  was on david silver spares site, they a full kit, but is entirely aftermarket and they dont say which manufacturer.  but i did copy down the part numbers for the float valves and floats and gaskets. just a matter of contacting western hills or pop dryer here in Indy.

my carbs were subjected to the mother of all horrors late this last winter when a storm took roof off my shop.  carbs were upside down on a build rack without bowl gaskets and filled with water.......and in my rush to get new roof and take care of everything else i didnt know until about a month ago.

for the most part the oxidation is taken care of.  but the float tangs have seen better days and been fixed once allready.   main jet appears ok its pilots the may be fubarred.