Topic: Billet pegs ..light ?

[754]

I dont. Know what modern pegs weigh or if you can run non folders in some places.
 A roadracer asked me to make some shorty pegs..i did and they came out at around 57 grams with a 8mm thread... Shown in the pic.. 3 inches x1 in diameter. .
 They would cost approx 50 bux for a pair. Without sliders on the end,am looking at putting something in the ends

 Then i knocked off a couple for me that were 3.5 x7/8.. With a bigger hole drilled inside.. Came out at 40 grams... It seems light.   Will still need a mount bracket to fit on stock location.
Weighed a stocker..one side.. 550 grams

[Stilltime]

Looks nice!  I would buy a set front and rear.  I need to order passenger ones at a minimum and fab a bracket to mount them (PO cut rear peg triangles off of the frame).

[Old Scrambler]

Nice Job Frank

I have something very similar on my Salt Flats bike..........fastened with an Allen-head bolt.