I know .. I know ... this has probably been posted a 100 times before...
I am trying to use the clear plastic tubing on the over flow to get the "actual" height
of the fuel in my floats .....
And what a relevation that was ....
Despite reading the manual, and checking and checking... with the carbs on the bike
and the tube attached.. the fuel level on #1 was level with the top of the float chamber.
So high .. that when I hit the brakes... it flooded the cylinder so much that it swamped
the plug, and I had to pull it out to clear the fuel out of the thing.
Well that is the latest theory :-)
To the question ... how far below the top of the float bowl top should the FUEL level be ??
I have it currently at the bottom of the attachment flange of the float bowl .. and that has made a
HUGE difference.
And a tip..... spend some time to get hold of a very short screw driver to pull the floats off
with the carbs on the bike ... duh
TIA
Peter
