Author Topic: DO YOU KNOW MARTIN FRENCH FRAME (Read 29229 times)

GEORGES · « **Reply #100 on:** January 06, 2012, 12:28:11 PM »

I think it's for sohc, i phone today but not answer, i'll try again tomorrow

http://pilleboue.free.fr/catalogue/1981.pdf

GEORGES · « **Reply #101 on:** January 10, 2012, 11:26:46 AM »

Quote from: azuredesign on January 04, 2012, 05:20:44 PM

Quote from: GEORGES on January 04, 2012, 12:33:33 PM
Frame to sail for 750 four

I wrote to the person selling this frame a few days ago, but received no reply.

The frame and parts are always to sell if you want really buy it give me a message

GEORGES · « **Reply #102 on:** January 13, 2012, 01:32:15 AM »

To answer a few questions Georges MARTIN build always frame for 750 four for fans

You can ask him on behalf of Georges Benelli.

georges.martin11@wanadoo.fr

754 · « **Reply #103 on:** February 06, 2012, 09:10:41 PM »

Bumping up for someone trying to ID a swingarm, with a MARTIN decal on it....

DYSKORD · « **Reply #104 on:** February 06, 2012, 11:55:42 PM »

Quote from: 754 on February 06, 2012, 09:10:41 PM

Bumping up for someone trying to ID a swingarm, with a MARTIN decal on it....

Tricky. . . Thank you!

Maybe someone has some info on what bike this might fit?

Darvill Racing · « **Reply #105 on:** February 07, 2012, 12:35:04 AM »

That looks like the 900 DOHC swinging arm, I will have a look through my phot archive ans see if I can find a pic of this.

Regards,
A

DYSKORD · « **Reply #106 on:** February 07, 2012, 01:08:17 AM »

Quote from: Darvill Racing on February 07, 2012, 12:35:04 AM

That looks like the 900 DOHC swinging arm, I will have a look through my phot archive ans see if I can find a pic of this.

Regards,
A

That would be spectacular!

Darvill Racing · « **Reply #107 on:** February 07, 2012, 11:05:08 AM »

Here is a pic of one of George's 1980 endurance bike, the swinging arm was braced later but as you can see it looks like the same item.

Regards,
A

NickO · « **Reply #108 on:** February 07, 2012, 11:19:45 AM »

Is

Quote from: Darvill Racing on February 07, 2012, 11:05:08 AM

Here is a pic of one of George's 1980 endurance bike, the swinging arm was braced later but as you can see it looks like the same item.

Regards,
A

Is that a CB1100R or a CB900F based engine?

Darvill Racing · « **Reply #109 on:** February 07, 2012, 11:37:29 AM »

Honda France supplied an RSC 998 DOHC engine that he had to return after the season, this bike has a standard CB900 engine fitted as you see here.

Regards,
A

Danno · « **Reply #110 on:** February 10, 2012, 02:04:56 AM »

je parle francais aussi

Sam Green Racing · « **Reply #111 on:** February 10, 2012, 03:38:46 AM »

Quote from: Darvill Racing on February 07, 2012, 11:05:08 AM

Here is a pic of one of George's 1980 endurance bike, the swinging arm was braced later but as you can see it looks like the same item.

Regards,
A

Double shock / single shock

Darvill Racing · « **Reply #112 on:** February 10, 2012, 10:27:11 AM »

Mono shock Sam

nice to ride i have to admit.....

Regards,
A

GEORGES · « **Reply #113 on:** February 15, 2012, 04:24:04 AM »

GEORGES · « **Reply #114 on:** February 15, 2012, 05:40:03 AM »

http://www.leboncoin.fr/motos/285190913.htm?ca=12_s

clive · « **Reply #115 on:** February 25, 2012, 04:55:19 PM »

Quote from: nippon on February 02, 2010, 02:23:41 PM

Axl's Martin and Georges Martin himself at Spa 2008

nippon

I see my old bike is still going (Japauto)

clive · « **Reply #116 on:** February 25, 2012, 05:27:23 PM »

Quote from: SamCR750A on February 10, 2012, 03:38:46 AM

Quote from: Darvill Racing on February 07, 2012, 11:05:08 AM
Here is a pic of one of George's 1980 endurance bike, the swinging arm was braced later but as you can see it looks like the same item.

Regards,
A

Double shock / single shock

Hi Sam
Yes she is nice to ride in fact she is parked next to my CR750 and RCB998 and others you can see her at SPA this year as its the first year i have ridden since 2009. She has a single shox on the right, the swinging arm has been braced after it was used in the 24hr Bol-Dor, it used to have a HONDA FRANCE engine fitted but this was returned to them when G Martin finished racing the bike, She now has a tuned 900 (998) lump in her the only thing that lets her down is the brakes (cast discs) It is used a lot now and Jim Redman has used it for the last two years at the THUNDERSPRINT in the UK and i OWN HER

GEORGES · « **Reply #117 on:** November 14, 2012, 09:57:00 AM »

http://www.leboncoin.fr/motos/392671616.htm?ca=12_s

GEORGES · « **Reply #118 on:** January 20, 2013, 11:40:44 PM »

http://www.leboncoin.fr/motos/421630869.htm?ca=12_s

turboguzzi · « **Reply #119 on:** January 21, 2013, 02:10:46 PM »

geez, you kinda need a strong stomach to down these martins....

cavebear · « **Reply #120 on:** June 17, 2013, 08:14:10 PM »

Georges I need to put neck bearing and front suspension on my Martin. What bearing sizes do I need to mount up a 78f front end?

Mike

johno · « **Reply #121 on:** June 18, 2013, 06:12:02 AM »

Love the glass work and paint on that piece of class. What really makes me drool is the wide frame where there is plenty of room to run a high port head.
Imagine a horny looking , good handling, 100hp cb 750 engined bike to cruise on when the weather and time is right

let me see, divorce or bike ...divorce or bike .........divorce or bike god its a tough life

RAFster122s · « **Reply #122 on:** June 18, 2013, 07:00:58 AM »

Pardon my ignorance, is the horizontal cylinder the gas tank on some of the frames?
Pretty frames and gorgeous bikes.

Retro Rocket · « **Reply #123 on:** June 18, 2013, 03:10:13 PM »

Quote from: RAFster122S on June 18, 2013, 07:00:58 AM

Pardon my ignorance, is the horizontal cylinder the gas tank on some of the frames?
Pretty frames and gorgeous bikes.

Oil Tank on some....

News:

Author Topic: DO YOU KNOW MARTIN FRENCH FRAME (Read 29229 times)