Author Topic: Best place to unload some KZ stuff?  (Read 3041 times)

0 Members and 1 Guest are viewing this topic.

Offline lwahples

  • Enthusiast
  • **
  • Posts: 179
Best place to unload some KZ stuff?
« on: June 30, 2013, 02:18:21 PM »
 Bought a truck load of CB parts and have what I believe are  KZ stuff with it.Not really knowing for sure,the guys raced KZ and CB750's it was cherry picked before I bought what was left. Just take pic's and toss it on Ebay or ?
 

Offline bjbuchanan

  • Master
  • *****
  • Posts: 2,274
Re: Best place to unload some KZ stuff?
« Reply #1 on: June 30, 2013, 06:39:59 PM »
I have a buddy with a kz550, what kinda stuff are we talking about?
PM me if the mods freeze this thread or if you just feel like it
The dirty girl-1976 cb750k, Ebay 836, Tracy bodykit
Round top carbs w/ 38 pilots, middle needle position, airscrew 7/8ths out, 122 main jet
Stock airbox w/ drop in K&N, Hooker 4-1

Don't trust me alone with a claw hammer and some pliers

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,493
  • Central Texas
Re: Best place to unload some KZ stuff?
« Reply #2 on: June 30, 2013, 07:35:03 PM »
I have a Z1 and may be interested....
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline seanbarney41

  • not really that much younger than an
  • Really Old Timer ...
  • *******
  • Posts: 10,929
Re: Best place to unload some KZ stuff?
« Reply #3 on: June 30, 2013, 08:29:57 PM »
let's see some pics...I need a bunch of kz1000 stuff :)
If it works good, it looks good...

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,493
  • Central Texas
Re: Best place to unload some KZ stuff?
« Reply #4 on: June 30, 2013, 08:52:18 PM »
let's see some pics...I need a bunch of kz1000 stuff :)

Hey Sean - developed an oil leak at the tach drive. Have you seen that on your KZ?
Never on any on my Hondas. Apparently there is a seal and two o rings...
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline seanbarney41

  • not really that much younger than an
  • Really Old Timer ...
  • *******
  • Posts: 10,929
Re: Best place to unload some KZ stuff?
« Reply #5 on: June 30, 2013, 09:04:23 PM »
let's see some pics...I need a bunch of kz1000 stuff :)
I would be very surprised if my tach drive leaked when the engine wasn't running, especially since it is currently not attached to the engine...I have never had my tach drive leak on a honda either, but I can remember lots of old threads posted here about how to fix it

Hey Sean - developed an oil leak at the tach drive. Have you seen that on your KZ?
Never on any on my Hondas. Apparently there is a seal and two o rings...
If it works good, it looks good...

Offline 750cafe

  • Hot Shot
  • ***
  • Posts: 606
Re: Best place to unload some KZ stuff?
« Reply #6 on: June 30, 2013, 09:11:38 PM »
Oil leak at the tach drive is a very common problem.
Just make sure that you replace BOTH the inner and outer seals.

Eric
Is there anything more fun than riding? They are between your legs and are quiet when you turn them off.

Offline 750K

  • Expert
  • ****
  • Posts: 1,392
Re: Best place to unload some KZ stuff?
« Reply #7 on: June 30, 2013, 10:04:06 PM »
I'm looking for an airbox for a kz1000, just saying.
77 Cb750, 78 Kz1000

Offline seanbarney41

  • not really that much younger than an
  • Really Old Timer ...
  • *******
  • Posts: 10,929
Re: Best place to unload some KZ stuff?
« Reply #8 on: July 01, 2013, 03:19:08 AM »
...me too
If it works good, it looks good...

Offline Scott S

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 8,234
Re: Best place to unload some KZ stuff?
« Reply #9 on: July 01, 2013, 03:40:54 AM »
'71 CB500 K0
'17 Triumph Street Scrambler
'81 Yamaha XS650

Offline bjbuchanan

  • Master
  • *****
  • Posts: 2,274
Re: Best place to unload some KZ stuff?
« Reply #10 on: July 01, 2013, 08:55:37 AM »
Tach drive leaks on the kz550. There are the a couple threads here too of CB's leaking
The dirty girl-1976 cb750k, Ebay 836, Tracy bodykit
Round top carbs w/ 38 pilots, middle needle position, airscrew 7/8ths out, 122 main jet
Stock airbox w/ drop in K&N, Hooker 4-1

Don't trust me alone with a claw hammer and some pliers

Offline bjatwood

  • I never claimed to be an
  • Expert
  • ****
  • Posts: 976
  • 1973 CB750-K3
    • Minbikers Proboards
Re: Best place to unload some KZ stuff?
« Reply #11 on: July 01, 2013, 09:02:02 AM »
Tach drive leak on my K3 a year ago. Apparently the rubber at 40 years old goes hard....
Who would of figured!!   :-[
Brian
#24193

I believe that the Finest things are the most thoughtfully made, not the most expensive!
http://minibikers.proboards.com/

Offline dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,494
Re: Best place to unload some KZ stuff?
« Reply #12 on: July 01, 2013, 11:59:47 AM »
A kz1000 engine would be nice
mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,493
  • Central Texas
Re: Best place to unload some KZ stuff?
« Reply #13 on: July 01, 2013, 03:59:29 PM »
A kz1000 engine would be nice

Or a 900 Z1....
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline seanbarney41

  • not really that much younger than an
  • Really Old Timer ...
  • *******
  • Posts: 10,929
Re: Best place to unload some KZ stuff?
« Reply #14 on: July 02, 2013, 02:50:28 AM »
wow, looks like this is a decent place to unload some kz stuff...where is Iwahples?
If it works good, it looks good...

Offline Red Good

  • Enthusiast
  • **
  • Posts: 140
Re: Best place to unload some KZ stuff?
« Reply #15 on: July 02, 2013, 09:44:48 AM »
Got any pipes ? need a set of stockers at least the head pipes or aftermarket 4 into 2's . Let me know if you have any . Red

Offline Frankensteins Bride

  • Enthusiast
  • **
  • Posts: 210
Re: Best place to unload some KZ stuff?
« Reply #16 on: July 02, 2013, 01:58:08 PM »
My honey needs a new regulator for a 76 900. :)
Working on: 78 Cb750k
Waiting for arrival: 73 Cb750

Frankensteins Wolf

Offline faux fiddy

  • Just becaus I'm the second post on the pissed off thread doesn't mean I'm an
  • Old Timer
  • ******
  • Posts: 4,810
  • bike in a box
Re: Best place to unload some KZ stuff?
« Reply #17 on: July 02, 2013, 04:52:49 PM »
My friend says I should get some later model  carbs off something like a 500 ninja for my cl450.

Got any for $5?
^^^^^^^/l^^^^^^^^^^^^^^/l^^^
. . ______/ l_________________/  l
<'  '  '   '  o .  . . . . . . .................(
 ' VVVVV'   ')))))____>-''''''''''''''''''\  l
' . vvvv_   -              -                 \/

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,493
  • Central Texas
Re: Best place to unload some KZ stuff?
« Reply #18 on: July 02, 2013, 07:02:14 PM »
Got any anything??
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline faux fiddy

  • Just becaus I'm the second post on the pissed off thread doesn't mean I'm an
  • Old Timer
  • ******
  • Posts: 4,810
  • bike in a box
Re: Best place to unload some KZ stuff?
« Reply #19 on: July 02, 2013, 09:59:50 PM »
I got some  40 year old pieces of plug wires that are no longer quite long enough to reach anymore for trade.
« Last Edit: July 02, 2013, 10:26:29 PM by faux fiddy »
^^^^^^^/l^^^^^^^^^^^^^^/l^^^
. . ______/ l_________________/  l
<'  '  '   '  o .  . . . . . . .................(
 ' VVVVV'   ')))))____>-''''''''''''''''''\  l
' . vvvv_   -              -                 \/

Offline 750K

  • Expert
  • ****
  • Posts: 1,392
Re: Best place to unload some KZ stuff?
« Reply #20 on: July 03, 2013, 04:19:13 PM »
I got a couple of ARVN rifles, good shape. Never been fired, only dropped once.
77 Cb750, 78 Kz1000

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,493
  • Central Texas
Re: Best place to unload some KZ stuff?
« Reply #21 on: July 03, 2013, 05:30:03 PM »
I got a crappy chomed side stand off a Z1, anyone want?
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........


Offline seanbarney41

  • not really that much younger than an
  • Really Old Timer ...
  • *******
  • Posts: 10,929
Re: Best place to unload some KZ stuff?
« Reply #23 on: July 09, 2013, 02:34:38 PM »
Iwahples, in the first pic, the sprocket cover with the small tear drop shaped panel?...can I see the back of it?  If the clutch actuator mechanism is still attached, I need that...
If it works good, it looks good...

Offline lwahples

  • Enthusiast
  • **
  • Posts: 179
Re: Best place to unload some KZ stuff?
« Reply #24 on: July 09, 2013, 03:07:38 PM »
I have two of those, good eyes by the way. I knew when I found them that they might be needed by someone. Being plastic.