Author Topic: hundred dollar rolling frame  (Read 11844 times)

0 Members and 1 Guest are viewing this topic.

Offline dave500

  • Really Old Timer ...
  • *******
  • Posts: 16,996
  • WHAT?no gravy?
Re: hundred dollar rolling frame
« Reply #50 on: March 12, 2011, 01:17:02 AM »
ok,micks tail pipe worked out perfect,even better than i thought it would,it was an open megaphone and needed quietening,i bought some perforated pipe,i found an automotive water pump pulley that sleeved over the end of the megaphone as if it was made for it ,so off came the vee belt ring and i plugged the four drive bolt holes with stainless button head allen bolts(bling),we have a mig at work so i got my mate to weld a sleeve to the pulley hub that goes over the perforated pipe,i got a bed spring from a local mattress manufacturer for nothing and it holds tention on the tube inside the cone,i wrapped it with insulation glass wool i found,should be on the road next week once i get it passed by the roadworthy guy and registered.


    it sounds a lot better in the flesh,audio on these is always a bit misleading,click the still for video
IMG]http://i857.photobucket.com/albums/ab139/dave500_01/th_muffler2.jpg[/img][/URL]
« Last Edit: April 22, 2011, 12:00:08 AM by dave500 »

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: hundred dollar rolling frame
« Reply #51 on: March 12, 2011, 04:12:45 PM »
Good stuff Dave, glad it worked out for you. I returned your email today but may as well ask for the forums sake, how did you end up joining the tail pipe to those headers mate.?

Mick
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline Tintop

  • Old Timer
  • ******
  • Posts: 3,965
Re: hundred dollar rolling frame
« Reply #52 on: March 12, 2011, 04:46:43 PM »
Looks good, sounds good - nice job.  Like the baffle solution.
1977 CB550/4 Cafe - Speed Warrior / BOTM 03/11
1980 CB750F (project)
Whittaker GBF Vintage Racing Sidecar (XS750 power) - ITG / 151's / CMR Racing Products (SOLD)
1976 CB400 SS - stock / BOTM 04/11 (SOLD)
1973 CB750 K - basket case (SOLD)
77 CB550 Cafe build
550/750 Filter Thread
Sidecar Rebuild Thread

Offline dave500

  • Really Old Timer ...
  • *******
  • Posts: 16,996
  • WHAT?no gravy?
Re: hundred dollar rolling frame
« Reply #53 on: March 12, 2011, 06:13:51 PM »
it just sleeved over the pipe and clamped right up.

Offline dave500

  • Really Old Timer ...
  • *******
  • Posts: 16,996
  • WHAT?no gravy?
Re: hundred dollar rolling frame
« Reply #54 on: April 22, 2011, 12:09:16 AM »
this is how it ended up,i swapped engines and exhausts between the two bikes i have,this now has the 500 engine and exhaust,i came back to it parked at the local shops to find a guy checking it out up close,i said gday and we talked about old bikes,he took my number as i said its for sale,i thought that would be the last i saw of him but he rang the next day and came to check it out further,he has a gb400 to sell as its too small(pretty big guy)but loves these old bikes,hates fairings.

Offline dave500

  • Really Old Timer ...
  • *******
  • Posts: 16,996
  • WHAT?no gravy?
Re: hundred dollar rolling frame
« Reply #55 on: May 27, 2011, 01:39:33 AM »
last update its sold now,,today its gone,i had it on the aussie"just bikes"online advert thing and itll also be in next months printed copy which is now too late to cancel,so i have a whole month of phone calls asking about it to look forward to,,the guy who bought it,,umm,,lives in sydney so i cancelled the registration and lowered the price accordingly,,,he now has to get the nsw roadworthy certificate etc,,,he didnt even ask me one question about the bike,he was here for some seminar or such??he just jumped on it,stamped it into first gear,flew up and down my street twice and its sold,,i dropped it off at a wharehouse this evening and got cash,hes going to organise a truck to pick it up,hes flying back to sydney as i type but had one last thrash up and down the industrial estate untill i pulled the plate and tag from it,he dosent know or didnt ask about anything,,never even crouched down to look close at anything,,just wanted to ride it,,when i asked him about what bikes hes had before i was told 17 years ago he had a virago 250,,i told him to take it easy man,warm it up and dont hammer the transmission,,see ya later.,,this bike will be killed.

Offline Greggo

  • Somebody's
  • Old Timer
  • ******
  • Posts: 4,164
  • Helmets Save Lives. Period.
Re: hundred dollar rolling frame
« Reply #56 on: May 27, 2011, 01:56:38 AM »
Kinda sad, but hopefully it will give someone else a chance to resurrect it later on. 

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: hundred dollar rolling frame
« Reply #57 on: May 27, 2011, 02:23:01 AM »
Good stuff mate, whats next on the agenda.?  How was the swap meet..?  ;)
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline dave500

  • Really Old Timer ...
  • *******
  • Posts: 16,996
  • WHAT?no gravy?
Re: hundred dollar rolling frame
« Reply #58 on: May 27, 2011, 02:38:27 AM »
swap was washed out retro,i rang an older guy who was going to go with his mate and a ute of stuff but they stayed home aswell,damn,i was keen to,next adgenda,,umm,a 277 degree xs650 maybe?with more or less stock look,,im hearing you greggo,,i might buy it back damaged?who knows,,man the guy cant ride,tried to start it in gear after he put it into gear?he dont care,never asked a question about the bike,i still dont get it??,the money is real,i think its a hip thing or something,to get an old bike and at least look the part??i dont think it was too cheap,,just so no one has to ask 3800 as is no rego.
« Last Edit: May 27, 2011, 03:22:19 AM by dave500 »

Offline 70CB750

  • Labor omnia vincit improbus.
  • Really Old Timer ...
  • *******
  • Posts: 14,786
  • Northern Virginia
Re: hundred dollar rolling frame
« Reply #59 on: June 15, 2011, 10:11:06 AM »
ok,micks tail pipe worked out perfect,even better than i thought it would,it was an open megaphone and needed quietening,i bought some perforated pipe,i found an automotive water pump pulley that sleeved over the end of the megaphone as if it was made for it ,so off came the vee belt ring and i plugged the four drive bolt holes with stainless button head allen bolts(bling),we have a mig at work so i got my mate to weld a sleeve to the pulley hub that goes over the perforated pipe,i got a bed spring from a local mattress manufacturer for nothing and it holds tention on the tube inside the cone,i wrapped it with insulation glass wool i found,should be on the road next week once i get it passed by the roadworthy guy and registered.

Great bike and I love your engineering approach!

Offline dave500

  • Really Old Timer ...
  • *******
  • Posts: 16,996
  • WHAT?no gravy?
Re: hundred dollar rolling frame
« Reply #60 on: November 22, 2013, 02:39:34 PM »
two and a half years later christo spotted it for sale on "gumtree",has a flat front tyre and missing one side cover,says 665 klms,when i cleaned up the speedo i zeroed it so its not been far or been reregistered?a pretty optimistic 7000?
http://www.gumtree.com.au/s-ad/warriewood/motorcycles/honda-cb-500-1972/1032354448