« previous next »
Pages: [1]   Go Down

Author Topic: rebuilding forks, parts advice?  (Read 1204 times)

0 Members and 1 Guest are viewing this topic.

Offline Bru-tom

  • Hot Shot
  • ***
  • Posts: 517
rebuilding forks, parts advice?
« on: July 11, 2013, 11:41:21 AM »
Hi once more,

I will be assembling my forks this weekend and want to know if i can use copper washers in place of number 20 and 21 on the fiche below?

Logged

Offline jamesbekman

  • Hot Shot
  • ***
  • Posts: 380
Re: rebuilding forks, parts advice?
« Reply #1 on: July 11, 2013, 11:44:30 AM »
Yes.  Thats what they are.  Just make sure they are the same size obviously.
Logged

Offline Bru-tom

  • Hot Shot
  • ***
  • Posts: 517
Re: rebuilding forks, parts advice?
« Reply #2 on: July 11, 2013, 11:55:08 AM »
thank you mate!

i was a little unsure as they are called "special" on the parts list. I bought several different copper washers when i bought my SS bolts etc. Copper aint cheap! :o

thanks once more ;)
Logged

Offline Powderman

  • Master
  • *****
  • Posts: 2,465
    • Creative Candy Powder Coating
Re: rebuilding forks, parts advice?
« Reply #3 on: July 11, 2013, 12:15:08 PM »
Yes, copper is what makes them "special" They will be delivered to you on a short bus.
Logged

Offline Bru-tom

  • Hot Shot
  • ***
  • Posts: 517
Re: rebuilding forks, parts advice?
« Reply #4 on: July 11, 2013, 12:20:43 PM »
hahahaha ;D

i just bought every o-ring that does not come in the vesrah gasket set for my bike. I got an excel doc from here somewhere with a list f seal, o-rings and bearings. i got all the seal for under (converted currency from Rand to) $5. It was like 20 off o-rings. the seals are a little more tricky to source but i have managed to get 90% of them. cost is approx $ 25. i dont know why more of us DIY'ers dont source our own o-rings, seals and bearings.... ???
Logged
Pages: [1]   Go Up
« previous next »