« previous next »
Pages: [1] 2 3 ... 7   Go Down

Author Topic: 76 CB550F - Oct 2021 - Rear tail light and rebuilding gauges  (Read 22126 times)

0 Members and 1 Guest are viewing this topic.

Offline KennyRedman

  • Hot Shot
  • ***
  • Posts: 380
  • 1976 CB550F, Indiana
76 CB550F - Oct 2021 - Rear tail light and rebuilding gauges
« on: August 12, 2013, 02:42:16 pm »
I bought this 76 550F for $500 earlier this year and due to having a baby, I have been chipping away at it slowly.

The most current status and purchased pics are attached.


I had a local guy powder coat the frame with a satin black and had Harisuluv clean and rebuild the carbs. They look awesome!


I rebuilt the top end- new gaskets all around.  It was leaking like a sieve- the head gasket plopped right off as the surfaces were covered in the copper gasket stuff.  It did not stick to the gasket, only the aluminum- that was hell to remove.  But, with patience, beer and music, I finally had all the surfaces clean. If I find one more gasket...!


After the motor went in, I put on the center stand with a new spring from DSS.  I painted the swingarm and centerstand with por15 and topcoated with a semi-gloss from duplicolor. 


I installed new tapered bearings in the stearing stem, and installed the forks with new gaiters. Got a repro seat cover from ebay, and put that on yesterday to see how it looks.  I'm installing the larger turn signals, because I like the looks of those better, and found the F sissy bar from Tews-
There's a lot left to assemble, and hopefully I'll be able to spend a couple hours a night after baby goes to sleep.  She starts daycare in a couple of days, so hopefully she'll be tired at the end of the day!

There are quite a few things I really want to do, but I might wait until this winter- riding season is getting shorter and shorter!
« Last Edit: October 03, 2021, 01:23:57 pm by KennyRedman »
Logged

Offline KennyRedman

  • Hot Shot
  • ***
  • Posts: 380
  • 1976 CB550F, Indiana
Re: 76 CB550F - Oct 2021 - Rear tail light and rebuilding gauges
« Reply #1 on: August 15, 2013, 05:51:34 pm »
I'm getting ready to put the rear wheel and brakes on and am continuing to clean and repaint as I go. Here are the pegs:





« Last Edit: August 16, 2013, 05:29:55 am by KennyRedman »
Logged

Offline LesterPiglet

  • Old Timer
  • ******
  • Posts: 4,046
  • 1977 CB550F2
Re: 76 CB550F - Oct 2021 - Rear tail light and rebuilding gauges
« Reply #2 on: August 15, 2013, 05:55:56 pm »
Looking very good.
Logged
'Then' and 'than' are completely different words and have completely different meanings. Same with 'of' and 'have'. Set and sit. There, their and they're. Draw and drawer. Could care less/couldn't care less. Bought/brought FFS.


Les Ross.            Certified by a Professional

Offline goldarrow

  • one day, i'll be an
  • Old Timer
  • ******
  • Posts: 3,361
Re: 76 CB550F - Oct 2021 - Rear tail light and rebuilding gauges
« Reply #3 on: August 15, 2013, 06:12:24 pm »
Yes that bike is looking really good.  Reminds me to get started on another project :)
Logged
Life Is Full Of Challenges - And My Backyard Is Full Of SOHC4's

CB550 K0
CB750 K0, K2, K23 JDM, K45, K5
And the little ones z50r, xr50r, st90


750k5 http://forums.sohc4.net/index.php?topic=114817.0

Offline KennyRedman

  • Hot Shot
  • ***
  • Posts: 380
  • 1976 CB550F, Indiana
Re: 76 CB550F - Oct 2021 - Rear tail light and rebuilding gauges
« Reply #4 on: August 16, 2013, 05:32:30 am »
Quote from: LesterPiglet on August 15, 2013, 05:55:56 pm
Looking very good.
Thank you sir!

Quote from: goldarrow on August 15, 2013, 06:12:24 pm
Yes that bike is looking really good.  Reminds me to get started on another project :)
Go for it! SENCHA looks awesome- how's it been this summer?
Logged

Offline free85

  • Full Member
  • *
  • Posts: 40
Re: 76 CB550F - Oct 2021 - Rear tail light and rebuilding gauges
« Reply #5 on: August 16, 2013, 06:10:02 am »
   That certainly is a very nice machine. You've done good work. I hope to see some pictures of it out and about soon!
Logged

Offline KennyRedman

  • Hot Shot
  • ***
  • Posts: 380
  • 1976 CB550F, Indiana
Re: 76 CB550F - Oct 2021 - Rear tail light and rebuilding gauges
« Reply #6 on: August 17, 2013, 02:06:53 pm »
Got a couple of hours in today while baby napped :)

Carbs are on:





Airbox is in:





Battery box is in:



I have a few questions about this filter I have and the original airbox parts at the bottom, but that'll have to wait til tomorrow as it's time to take the baby to the sitter for the evening.
Logged

Offline Tews19

  • I am no
  • Really Old Timer ...
  • *******
  • Posts: 6,465
Re: 76 CB550F - Oct 2021 - Rear tail light and rebuilding gauges
« Reply #7 on: August 17, 2013, 02:54:37 pm »
Looks like you are rolling along!
Logged
1969 Honda CB750... Basket case
1970 Honda CB750 survivor.

Offline KennyRedman

  • Hot Shot
  • ***
  • Posts: 380
  • 1976 CB550F, Indiana
Re: 76 CB550F - Oct 2021 - Rear tail light and rebuilding gauges
« Reply #8 on: August 17, 2013, 04:18:57 pm »
Quote from: Tews19 on August 17, 2013, 02:54:37 pm
Looks like you are rolling along!

Ya man, a few more solid days and it should be ready.
« Last Edit: August 17, 2013, 05:15:07 pm by KennyRedman »
Logged

Offline +eb0

  • Full Member
  • *
  • Posts: 21
Re: 76 CB550F - Oct 2021 - Rear tail light and rebuilding gauges
« Reply #9 on: August 18, 2013, 12:33:14 am »
looks good, wish my 76 was that good to start and I was as far along as you!

+eb0
Logged
"You!, out of the gene pool now!!"

1976 Honda CB550F
2005 Honda VFR
2009 Ducati 1198S

Offline KennyRedman

  • Hot Shot
  • ***
  • Posts: 380
  • 1976 CB550F, Indiana
Re: 76 CB550F - Oct 2021 - Rear tail light and rebuilding gauges
« Reply #10 on: August 18, 2013, 09:55:44 am »
Got the rear brakes, kickstand and wheel on this morning.





Almost forgot the little spring for the switch:



Figured I'd coast down the driveway :)



« Last Edit: August 18, 2013, 10:45:26 am by KennyRedman »
Logged

Offline LesterPiglet

  • Old Timer
  • ******
  • Posts: 4,046
  • 1977 CB550F2
Re: 76 CB550F - Oct 2021 - Rear tail light and rebuilding gauges
« Reply #11 on: August 18, 2013, 10:28:07 am »
I thought the fire hydrant was some sort of mascot at first.   ::)
Logged
'Then' and 'than' are completely different words and have completely different meanings. Same with 'of' and 'have'. Set and sit. There, their and they're. Draw and drawer. Could care less/couldn't care less. Bought/brought FFS.


Les Ross.            Certified by a Professional

Offline Tews19

  • I am no
  • Really Old Timer ...
  • *******
  • Posts: 6,465
Re: 76 CB550F - Oct 2021 - Rear tail light and rebuilding gauges
« Reply #12 on: August 18, 2013, 12:01:12 pm »
Depending on your riding style, you may like superbike bars better. They are lower but do not change the look. Great buy for 17 bucks plus shipping. I put on everyone of my bikes..
Logged
1969 Honda CB750... Basket case
1970 Honda CB750 survivor.

Offline KennyRedman

  • Hot Shot
  • ***
  • Posts: 380
  • 1976 CB550F, Indiana
Re: 76 CB550F - Oct 2021 - Rear tail light and rebuilding gauges
« Reply #13 on: August 18, 2013, 01:06:13 pm »
Quote from: Tews19 on August 18, 2013, 12:01:12 pm
Depending on your riding style, you may like superbike bars better. They are lower but do not change the look. Great buy for 17 bucks plus shipping. I put on everyone of my bikes..

I'll probably do that. I want to put on some SS brake lines, but I thought I'd wait until the seat's on to see how the ride position is. I wouldn't mind coming across a 400f set of bars that are drilled for the wiring, too. We'll see.
Logged

Offline KennyRedman

  • Hot Shot
  • ***
  • Posts: 380
  • 1976 CB550F, Indiana
Re: 76 CB550F - Oct 2021 - Rear tail light and rebuilding gauges
« Reply #14 on: August 20, 2013, 06:04:33 pm »
Does anyone think that using bolts in place of the seat hinge pins is a bad idea? I mean, will the threads screw up the hinges or finish?

A couple 6mm bolts and a few washers and nuts fit perfect. (Haven't tightened them down yet)

Logged

Offline Tews19

  • I am no
  • Really Old Timer ...
  • *******
  • Posts: 6,465
Re: 76 CB550F - Oct 2021 - Rear tail light and rebuilding gauges
« Reply #15 on: August 20, 2013, 06:46:32 pm »
Not sure it will negatively effect.. I may have 2 pins if you need them. Yours
Logged
1969 Honda CB750... Basket case
1970 Honda CB750 survivor.

Offline KennyRedman

  • Hot Shot
  • ***
  • Posts: 380
  • 1976 CB550F, Indiana
Re: 76 CB550F - Oct 2021 - Rear tail light and rebuilding gauges
« Reply #16 on: August 20, 2013, 07:08:17 pm »
Quote from: Tews19 on August 20, 2013, 06:46:32 pm
Not sure it will negatively effect.. I may have 2 pins if you need them. Yours

I think you sent two with this seat, but I totally lost them. If you have more that would be awesome.
Logged

Offline Tews19

  • I am no
  • Really Old Timer ...
  • *******
  • Posts: 6,465
Re: 76 CB550F - Oct 2021 - Rear tail light and rebuilding gauges
« Reply #17 on: August 20, 2013, 07:13:22 pm »
Damn I forgot about the seat. . Thats the one I said pay shipping and it's yours for free... let me check... I will get back to you in the AM..
Logged
1969 Honda CB750... Basket case
1970 Honda CB750 survivor.

Offline KennyRedman

  • Hot Shot
  • ***
  • Posts: 380
  • 1976 CB550F, Indiana
Re: 76 CB550F - Oct 2021 - Rear tail light and rebuilding gauges
« Reply #18 on: August 20, 2013, 07:43:18 pm »
Cool. I got a nice new repro cover for it and it looks pretty sweet.
« Last Edit: August 20, 2013, 07:44:57 pm by KennyRedman »
Logged

Offline Tews19

  • I am no
  • Really Old Timer ...
  • *******
  • Posts: 6,465
Re: 76 CB550F - Oct 2021 - Rear tail light and rebuilding gauges
« Reply #19 on: August 20, 2013, 07:47:39 pm »
Nice.. Let me see and I will follow up tomorrow. I have to ship off some parts so if I do have them I will mail them off. PM me your mailing info again please.
Logged
1969 Honda CB750... Basket case
1970 Honda CB750 survivor.

Offline LesterPiglet

  • Old Timer
  • ******
  • Posts: 4,046
  • 1977 CB550F2
Re: 76 CB550F - Oct 2021 - Rear tail light and rebuilding gauges
« Reply #20 on: August 22, 2013, 12:29:59 pm »
I have allen bolts in my seat no problems....if anyone has any hinges  ;D ;D ;D ;D
Logged
'Then' and 'than' are completely different words and have completely different meanings. Same with 'of' and 'have'. Set and sit. There, their and they're. Draw and drawer. Could care less/couldn't care less. Bought/brought FFS.


Les Ross.            Certified by a Professional

Offline KennyRedman

  • Hot Shot
  • ***
  • Posts: 380
  • 1976 CB550F, Indiana
Re: 76 CB550F - Oct 2021 - Rear tail light and rebuilding gauges
« Reply #21 on: August 22, 2013, 09:07:49 pm »
I had to do a quick preview. I should almost be done with it this next weekend.  How does everyone feel about black fenders in these bikes?

 

Logged

Offline KennyRedman

  • Hot Shot
  • ***
  • Posts: 380
  • 1976 CB550F, Indiana
Re: 76 CB550F - Oct 2021 - Rear tail light and rebuilding gauges
« Reply #22 on: September 05, 2013, 11:00:32 am »
Found a great looking tank with a spotless interior:



and a set of nice side covers:





« Last Edit: September 06, 2013, 08:12:24 am by KennyRedman »
Logged

Offline Tews19

  • I am no
  • Really Old Timer ...
  • *******
  • Posts: 6,465
Re: 76 CB550F - Oct 2021 - Rear tail light and rebuilding gauges
« Reply #23 on: September 05, 2013, 11:08:30 am »
Chrome is the way to go for fenders IMO.. 

Is yours shot?
Logged
1969 Honda CB750... Basket case
1970 Honda CB750 survivor.

Offline KennyRedman

  • Hot Shot
  • ***
  • Posts: 380
  • 1976 CB550F, Indiana
Re: 76 CB550F - Oct 2021 - Rear tail light and rebuilding gauges
« Reply #24 on: September 05, 2013, 11:10:57 am »
Quote from: Tews19 on September 05, 2013, 11:08:30 am
Chrome is the way to go for fenders IMO.. 


Ya, I agree. Mine are fine, but I might have to build a Triumph next to satisfy my black fender desire :)
« Last Edit: September 05, 2013, 11:15:51 am by KennyRedman »
Logged
Pages: [1] 2 3 ... 7   Go Up
« previous next »