« previous next »
Pages: [1]   Go Down

Author Topic: Oil Pump Dowel Pin CB550  (Read 1047 times)

0 Members and 1 Guest are viewing this topic.

Offline Zora

  • Full Member
  • *
  • Posts: 18
Oil Pump Dowel Pin CB550
« on: August 13, 2013, 11:15:30 AM »
Does anyone know where to find a replacement dowel pin that goes inside the oil pump? My oil pump is missing one and it is leaking oil everywhere. I've also seen them called an o-ring collar. The oil pump should have two of them and they add support to each of the small o-rings. The dowel pin is in the lower right of the attached picture.

Thanks.

Steve
Logged
'77 CB550F - Finally on the road...
'78 CB550K - not running yet...
'06 YZ450F
'01 KLX300

Offline bryanj

  • Really Old Timer ...
  • *******
  • Posts: 14,184
  • CB500 Number 1000036
Re: Oil Pump Dowel Pin CB550
« Reply #1 on: August 13, 2013, 01:57:08 PM »
Have you tried looking up the part number and seeing if Honda still sell it?
Logged
Semi Geriatric ex-Honda mechanic and MOT tester (UK version of annual inspection). Garage full of "projects" mostly 500/4 from pre 73 (no road tax in UK).

Remember "Its always in the last place you look" COURSE IT IS YOU STOP LOOKIN THEN!

Offline Zora

  • Full Member
  • *
  • Posts: 18
Re: Oil Pump Dowel Pin CB550
« Reply #2 on: August 13, 2013, 05:34:11 PM »
The dowel pin is not available from Honda anymore. I checked with one of the local junkyards, they want to sell me the whole pump for $60...
Logged
'77 CB550F - Finally on the road...
'78 CB550K - not running yet...
'06 YZ450F
'01 KLX300

Offline reddyvv

  • Hot Shot
  • ***
  • Posts: 252
Re: Oil Pump Dowel Pin CB550
« Reply #3 on: August 13, 2013, 07:04:17 PM »
You can get one here - last one left!!

http://www.cmsnl.com/products/collar-o-ring_15155323000/
Logged

Offline xsmooth69x

  • Master
  • *****
  • Posts: 1,621
Re: Oil Pump Dowel Pin CB550
« Reply #4 on: August 13, 2013, 08:29:15 PM »
whats wrong with it that you need to replace it?

are you sure its not still stuck to the side of the case (engine case not the oil pump case)?

« Last Edit: August 13, 2013, 08:30:54 PM by xsmooth69x »
Logged
1975 CB550 (FINISHED?!?!?)
first motorcycle ever!!! ow and i dont know how to ride it either :D

raw rust rice venti quad shot cafe racing latte project aka my build..... http://forums.sohc4.net/index.php?topic=88853.0

black and white equation godzilla chalkboard 
1972 cb750 - next in line for some <3

Offline reddyvv

  • Hot Shot
  • ***
  • Posts: 252
Re: Oil Pump Dowel Pin CB550
« Reply #5 on: August 13, 2013, 08:36:29 PM »
Since the oil pump was leaking oil already, sounds like a PO mystery missing optional part situation.  :P
Logged

Offline xsmooth69x

  • Master
  • *****
  • Posts: 1,621
Re: Oil Pump Dowel Pin CB550
« Reply #6 on: August 13, 2013, 09:39:53 PM »
Quote from: reddyvv on August 13, 2013, 08:36:29 PM
Since the oil pump was leaking oil already, sounds like a PO mystery missing optional part situation.  :P

ya true but i just want to make sure i thought i lost mine to but i found it stuck to my engine case over the hole where it sits against the case instead of coming off with the oil pump housing
Logged
1975 CB550 (FINISHED?!?!?)
first motorcycle ever!!! ow and i dont know how to ride it either :D

raw rust rice venti quad shot cafe racing latte project aka my build..... http://forums.sohc4.net/index.php?topic=88853.0

black and white equation godzilla chalkboard 
1972 cb750 - next in line for some <3

Offline reddyvv

  • Hot Shot
  • ***
  • Posts: 252
Re: Oil Pump Dowel Pin CB550
« Reply #7 on: August 13, 2013, 09:53:13 PM »
Good point, easy to overlook.
Logged

Offline Zora

  • Full Member
  • *
  • Posts: 18
Re: Oil Pump Dowel Pin CB550
« Reply #8 on: August 14, 2013, 10:47:05 AM »
Thanks for the tip to the CMS site. Unfortunately shipping is $42 so the search continues.

The part was missing when I took the pump off. The PO tried a ton of sealant on top of the o-rings though. He even had sealant on the sprocket cover. I found a brass tube at the local metal supply that might work but the wall thickness isn't as thick as the original. I'll probably give it a shot if I can't find an original part.
Logged
'77 CB550F - Finally on the road...
'78 CB550K - not running yet...
'06 YZ450F
'01 KLX300

Offline bryanj

  • Really Old Timer ...
  • *******
  • Posts: 14,184
  • CB500 Number 1000036
Re: Oil Pump Dowel Pin CB550
« Reply #9 on: August 14, 2013, 12:06:06 PM »
Same part for 500/550/650 so you ought to be able to find a used one somewhere, I'm in UK so as you found shipping kills one from here
Logged
Semi Geriatric ex-Honda mechanic and MOT tester (UK version of annual inspection). Garage full of "projects" mostly 500/4 from pre 73 (no road tax in UK).

Remember "Its always in the last place you look" COURSE IT IS YOU STOP LOOKIN THEN!

Offline goldarrow

  • one day, i'll be an
  • Old Timer
  • ******
  • Posts: 3,360
Re: Oil Pump Dowel Pin CB550
« Reply #10 on: August 14, 2013, 02:48:51 PM »
try local hardware store to see if you can find something of similar or same size in the plumbing department? or put up wanted ad in the classified section?
Logged
Life Is Full Of Challenges - And My Backyard Is Full Of SOHC4's

CB550 K0
CB750 K0, K2, K23 JDM, K45, K5
And the little ones z50r, xr50r, st90


750k5 http://forums.sohc4.net/index.php?topic=114817.0

Offline reddyvv

  • Hot Shot
  • ***
  • Posts: 252
Re: Oil Pump Dowel Pin CB550
« Reply #11 on: August 14, 2013, 03:30:20 PM »
$42?!!! That's crazy, no way does it cost that much. I guess they charge a minimum, that sucks.
Logged
Pages: [1]   Go Up
« previous next »