Author Topic: The Green Ape Project Cb500 (Read 5266 times)

robdrobd · « **on:** August 17, 2013, 06:07:13 PM »

Here is my new project. Working on tear down. Here are the pics. If you like any of this chopper stuff let me know and we'll deal. I also have quite a few cb500 spare parts if you need them. Just ask and I'll tell you what I have.

robdrobd · « **Reply #1 on:** August 18, 2013, 11:14:01 AM »

Quick update. I have a spare engine with covers so my pan is to clean and paint everything while she's in rolling chassis form. Then polish the aluminum from the spare and swap out the covers

robdrobd · « **Reply #2 on:** August 18, 2013, 01:37:13 PM »

Cleaned and degreased, engine is actually very clean.

rb550four · « **Reply #3 on:** August 18, 2013, 08:48:01 PM »

I like that seat, is it in good shape, want to sell it ? I'm kinda local....well I'm in upstate NY and have a project that is begging for a seat like that.please let me know.

robdrobd · « **Reply #4 on:** August 18, 2013, 09:23:01 PM »

Quote from: rb550four on August 18, 2013, 08:48:01 PM

I like that seat, is it in good shape, want to sell it ? I'm kinda local....well I'm in upstate NY and have a project that is begging for a seat like that.please let me know.

Sure! PM me an offer, but I'm not shipping the thing. Seat is in good shape, missing one button. I'd rather trade for a different seat because I don't have one!

FunJimmy · « **Reply #5 on:** August 18, 2013, 10:09:09 PM »

Looks likes good roller.
Interested to see where this goes.

robdrobd · « **Reply #6 on:** August 21, 2013, 12:14:30 PM »

Evapo-Rust is a miracle product. I love it.

robdrobd · « **Reply #7 on:** August 23, 2013, 02:59:11 PM »

Scored some forks from a member here and a near mint front wheel from an old Italian dude up the road. He charged me $20. Pickup only. Haha

robdrobd · « **Reply #8 on:** August 26, 2013, 11:03:43 AM »

Early mock up

Tews19 · « **Reply #9 on:** August 26, 2013, 11:40:08 AM »

Looking good.. What a deal on the forks too!

robdrobd · « **Reply #10 on:** December 30, 2013, 04:16:29 PM »

Ok, so no bites on the project before Christmas so I'm full steam ahead. Cut off seat mounts, installed wiring harness, headlight, carbs, front lights, and gauges!

Sent from my iPhone using Tapatalk

SOHC4 Cafe Racer Fan · « **Reply #11 on:** December 30, 2013, 04:37:52 PM »

Quote from: robdrobd on December 30, 2013, 04:16:29 PM

Ok, so no bites on the project before Christmas so I'm full steam ahead. Cut off seat mounts, installed wiring harness, headlight, carbs, front lights, and gauges!

Sent from my iPhone using Tapatalk

The replacement bars are a big improvement!

robdrobd · « **Reply #12 on:** December 30, 2013, 05:00:47 PM »

Yeah, I don't know how anyone uses apes!

Sent from my iPhone using Tapatalk

Stev-o · « **Reply #13 on:** December 30, 2013, 06:22:01 PM »

Quote from: robdrobd on December 30, 2013, 05:00:47 PM

Yeah, I don't know how anyone uses apes!

Sent from my iPhone using Tapatalk

+1. Now you'll have to change the name. The green monkey?

RAFster122s · « **Reply #14 on:** December 30, 2013, 07:55:09 PM »

Looking good!
I prefer the upright position of stock bars. My neck and carpal tunnel do as well.

Scored some nice deals.

rb550four · « **Reply #15 on:** December 30, 2013, 08:26:15 PM »

Good to see that you're back. You didn't want to sell that machine anyways, and we get to watch you finish it.

robdrobd · « **Reply #16 on:** December 31, 2013, 05:39:13 AM »

Yeah, when people came to see it and started low balling me it got me all fired up to finish the thing!

Sent from my iPhone using Tapatalk

robdrobd · « **Reply #17 on:** January 01, 2014, 01:04:24 PM »

Well, no spark on 1 + 4, dead condenser. At least I'll have the pipes back on before the new condensers show up.

Sent from my iPhone using Tapatalk

robdrobd · « **Reply #18 on:** January 03, 2014, 11:39:55 AM »

Did a little work today. Decided not to chop the frame completely. Instead, I just scored it from the inside and then pounded it in. Left a nice place to mount a tail light ! Here's a pic of the job plus a pic of the bike in current state.

Sent from my iPhone using Tapatalk

Maurice · « **Reply #19 on:** January 03, 2014, 11:53:59 AM »

Nice bike, the tank looks mint.

If you plan on mounting the light like that, ensure that shock travel is limited or your light/plate etc. will get launched into the scenery at the first bump in the road

What do you plan on doing for a seat?

robdrobd · « **Reply #20 on:** January 03, 2014, 11:59:59 AM »

Believe it or not, I think I have an idea for a plywood seat pan. That will also allow me to mount the tail light into the wood itself if travel becomes a problem (which it might because I put on about 20 lbs :0))

Sent from my iPhone using Tapatalk

robdrobd · « **Reply #21 on:** January 03, 2014, 12:02:14 PM »

Oh yeah, also got this nice little nick while using the angle grinder . Ouch !

Sent from my iPhone using Tapatalk

Maurice · « **Reply #22 on:** January 03, 2014, 12:02:41 PM »

Interesting, will be sure to follow. Yeah the cold isn't helping. Lay off the sugar, helps way more than you'd think.

robdrobd · « **Reply #23 on:** January 03, 2014, 01:17:25 PM »

So, here's my plan. Half inch plywood, scored so it bends, put epoxy in scores, and clamp into place. Hopefully it stays in this shape.

Sent from my iPhone using Tapatalk

sebastienb · « **Reply #24 on:** January 03, 2014, 02:36:35 PM »

Looking forward to seeing the finished seat

News:

Author Topic: The Green Ape Project Cb500 (Read 5266 times)