Topic: Where was that !&#$ thread?

[kaybee]

Hello to all and my first post with a Q?
 I'm trying to freshen up the clutch on my 750-K1. Got everything apart ok...rings are within specs. I'm replacing stock with barnett springs. When I was tightening the clutch lifter plate, I broke off the one of the "tabs" 
 About 2 weeks ago, I was reading a thread on the exact same situation and how to prevent this from happening.  (I know enough to tighten in a pattern with 1/2 turns). At any rate, I can't seem to find that thread again to refresh my memory. Any tips or help to find that thread would be a great help to me.

[puppytrax]

Ain't that something?? You can go back 10 pages in this Forum, and the threads are only from 9 days ago...   

I never seen a Forum build up threads so fast...   

[Magpie]

Have a look at this one and scroll down a bit. I have done the same thing assembling my '71 clutch. Hope this helps
http://www.sohc4.us/forums/index.php?topic=6467.0
Cliff.

[Pinhead]

Ain't that something?? You can go back 10 pages in this Forum, and the threads are only from 9 days ago...   

I never seen a Forum build up threads so fast...   

I was thinking the very same thing. This is the most active forum I've found on the 'net for any subject.