« previous next »
Pages: [1]   Go Down

Author Topic: inline filters  (Read 1463 times)

0 Members and 1 Guest are viewing this topic.

Offline neilc

  • Hot Shot
  • ***
  • Posts: 477
  • old school biker,other bike is a 2003 vtx1800c
inline filters
« on: September 25, 2013, 11:25:05 AM »
anyone ever come across a 1/4" inline filter with single inlet and double out
Logged

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,289
Re: inline filters
« Reply #1 on: September 25, 2013, 11:43:20 AM »
no, but you can add a 1 into 2 splitter after it.
just be sure it flows enough.
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline Muckinfuss

  • Hot Shot
  • ***
  • Posts: 380
  • "I plan to live forever.....or die trying."
Re: inline filters
« Reply #2 on: September 26, 2013, 08:56:37 AM »
Logged
1984 Sportster 1000cc XL
1988 Heritage Softail
1974 CB550
1989 Corvette

Offline neilc

  • Hot Shot
  • ***
  • Posts: 477
  • old school biker,other bike is a 2003 vtx1800c
Re: inline filters
« Reply #3 on: September 26, 2013, 05:16:18 PM »
Awsome thanks
Logged

Offline LesterPiglet

  • Old Timer
  • ******
  • Posts: 4,045
  • 1977 CB550F2
Re: inline filters
« Reply #4 on: September 26, 2013, 08:41:31 PM »
Just wondering why one would need such a contraption?
Logged
'Then' and 'than' are completely different words and have completely different meanings. Same with 'of' and 'have'. Set and sit. There, their and they're. Draw and drawer. Could care less/couldn't care less. Bought/brought FFS.


Les Ross.            Certified by a Professional

Offline brandEn

  • Old Timer
  • ******
  • Posts: 3,202
Re: inline filters
« Reply #5 on: September 26, 2013, 10:19:18 PM »
I am going to need something like this to work with my single outlet petcock and dual inlet carbs.
Logged

Offline Duanob

  • Bold Timer
  • Old Timer
  • ******
  • Posts: 4,019
  • Gotcha!
Re: inline filters
« Reply #6 on: September 27, 2013, 11:40:55 AM »
Quote from: Muckinfuss on September 26, 2013, 08:56:37 AM
Close enough?

http://pingelonline.com/fuel_filters.htm

Great idea but I didn't see 1/4" in there. 5/16" would be too big.
Logged
"Just because you flush a boatload of money down the toilet, doesn't make the toilet worth more",  My Stepfather the Unknown Poet

1974 CB360T
1976 CB550K2 Resurrected
1976 CB550F2 Barn Find
1979 CX500 VG "HONDA-GUZZI"
2007 Moto Guzzi Breva 750ie
2015 BMW F700GS
Another 1976 CB550K Cafe?

  __o
_- \_<,
(*) /' (*)

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,289
Re: inline filters
« Reply #7 on: September 27, 2013, 01:37:57 PM »
a little plastic 'T' or 'Y' after the single inline filter will work just as well to split off to the different inlets.  less fuel line routing issues under your tank. tidy.
if you are worried about adequate flow, go to bigger ID lines and tuck one hi-flow filter down in for 1/2 & 3/4.  one filter clogging can make a mess for all your carbs...
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline Hastenbrucke

  • Full Member
  • *
  • Posts: 41
Re: inline filters
« Reply #8 on: October 01, 2013, 03:42:28 AM »
Pingel do a 1 into 2 outlet. It is SS12P ...looks really good
Logged
Pages: [1]   Go Up
« previous next »