Author Topic: Goldwing gurus  (Read 3943 times)

0 Members and 1 Guest are viewing this topic.

Offline dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,482
Goldwing gurus
« on: October 06, 2013, 11:27:14 AM »
I will be picking up 2 and a half gl1100's this coming saturday.one runs but the 2 rollers are a bit disheveled.i will be picking your brains in the coming months with questions on getting these bikes on the road.thanks in advance
mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3

Offline bert96

  • past ride
  • Expert
  • ****
  • Posts: 1,385
Re: Goldwing gurus
« Reply #1 on: October 06, 2013, 12:22:03 PM »
This is a good place to start,


http://ngwclub.com/forum/




Bert
QA50 1969,ST-90 1974,mb5 1982,rz350 1983,shadow 1100 1985,vf1000f 1985,BMW K1 1990,shadow tourer 1100 2001,vfr 750 1994,vtr250 199?

Offline dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,482
Re: Goldwing gurus
« Reply #2 on: October 06, 2013, 03:07:44 PM »
Good deal,thanks bert
mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3

Offline Bankerdanny

  • Eventually I will be old enough in reality to be
  • Really Old Timer ...
  • *******
  • Posts: 7,626
  • Endeavor to persevere
Re: Goldwing gurus
« Reply #3 on: October 07, 2013, 09:00:35 AM »
The NGW is by far my favorite, but there are several really good Goldwing forums out there.
"The problem with quotes on the Internet is that you never know if they're true" - Abraham Lincoln

Current: '76 CB750F. Previous:  '75 CB550F, 2007 Yamaha Vino 125 Scooter, '75 Harley FXE Superglide, '77 GL1000, '77 CB550k, '68 Suzuki K10 80, '68 Yamaha YR2, '69 BMW R69S, '71 Honda SL175, '02 Royal Enfield Bullet 500, '89 Yamaha FJ1200

Offline Tugboat

  • Puppet
  • Master
  • *****
  • Posts: 1,778
  • '75 CB750K + '67 CL90 + '71 CT90
    • PseudoMoto
Re: Goldwing gurus
« Reply #4 on: October 07, 2013, 09:28:26 AM »
Indeed. You'll definitely need to change out the timing belts, if nothing else - and just for your piece of mind, even if the PO "recently had them changed." I also did my water pump while I was down there since it was leaking. All-in-all, it wasn't nearly as hard as you'd think. Carbs are kinda tricky too, but nothing you can't handle. Start a project thread here so we can follow along. Good luck!
If it's worth doing, it's worth doing twice.

Offline dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,482
Re: Goldwing gurus
« Reply #5 on: October 07, 2013, 01:45:39 PM »
Oh yea,the belts are definetly at the too of the list
mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3

Offline Tugboat

  • Puppet
  • Master
  • *****
  • Posts: 1,778
  • '75 CB750K + '67 CL90 + '71 CT90
    • PseudoMoto
Re: Goldwing gurus
« Reply #6 on: October 07, 2013, 01:50:15 PM »
You can get a "new to you" kit here for like $80. It has new belts, new thermostat, new oil filter, plugs, radiator hose, etc. Recommended!

http://cascadecycle.com/new2ukits.htm
If it's worth doing, it's worth doing twice.

Offline bert96

  • past ride
  • Expert
  • ****
  • Posts: 1,385
Re: Goldwing gurus
« Reply #7 on: October 08, 2013, 07:49:24 AM »
You can replace few parts(i.e.timing belts) with car parts for way more cheaper



Bert
QA50 1969,ST-90 1974,mb5 1982,rz350 1983,shadow 1100 1985,vf1000f 1985,BMW K1 1990,shadow tourer 1100 2001,vfr 750 1994,vtr250 199?

Offline dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,482
Re: Goldwing gurus
« Reply #8 on: October 08, 2013, 04:35:10 PM »
I found belt sets on ebay for about 30 dollars,one costs that much at work.
mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3

Offline 78 k550

  • Master
  • *****
  • Posts: 2,479
Re: Goldwing gurus
« Reply #9 on: October 08, 2013, 07:34:10 PM »
If you have an 83 speedo Might it be for sale?
it should go to 150 not 85.

Paul
Paul
Littleton, CO

76/77 CB 750F, 
75 GL1000, (AKA GL1-242 NGWClub),
76 GL1000 LTD
84 GL1200 Standard
6 Bultaco's= 42, 49, 121, 152, 167, 188

Offline dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,482
Re: Goldwing gurus
« Reply #10 on: October 09, 2013, 07:19:12 AM »
Paul,when i get everything this weekend and see what i have,ill get back to you
mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3

Offline 6adan

  • Hot Shot
  • ***
  • Posts: 421
Re: Goldwing gurus
« Reply #11 on: October 09, 2013, 08:02:08 AM »
If you saw those belts from Saber Cycle please look at NGW and other GW sites and read about them.
1970 CB750 JDM,1975 GL1000, 1979 GL1000, 1979 CBX, 1995 GL1500, 2000 GL1500CT Valkyrie, 2008 GL1800 Trike.

Offline dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,482
Re: Goldwing gurus
« Reply #12 on: October 09, 2013, 08:20:09 AM »
not sure who they were from,but ill keep an eye out for saber.thanks
mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3

Offline Tugboat

  • Puppet
  • Master
  • *****
  • Posts: 1,778
  • '75 CB750K + '67 CL90 + '71 CT90
    • PseudoMoto
Re: Goldwing gurus
« Reply #13 on: October 09, 2013, 08:25:33 AM »
The ones in the kit that I mentioned are Bates FWIW
If it's worth doing, it's worth doing twice.

Offline bert96

  • past ride
  • Expert
  • ****
  • Posts: 1,385
Re: Goldwing gurus
« Reply #14 on: October 09, 2013, 09:26:52 AM »


Part number belts,

GL1000 & GL1100
Gates - #5119 or #T274 (2ea.)
NAPA - #250274 (2 ea.)
Goodyear - #40274 (2 ea.)


Bert
QA50 1969,ST-90 1974,mb5 1982,rz350 1983,shadow 1100 1985,vf1000f 1985,BMW K1 1990,shadow tourer 1100 2001,vfr 750 1994,vtr250 199?

Offline dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,482
Re: Goldwing gurus
« Reply #15 on: October 09, 2013, 02:56:51 PM »
Bert,the gates belts are about 30 a piece at an auto parts store
mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3

Offline 6adan

  • Hot Shot
  • ***
  • Posts: 421
Re: Goldwing gurus
« Reply #16 on: October 09, 2013, 06:28:53 PM »
I am not talking about Saber in a positive way. You should read about them before you buy anything from them. Look at NGW and Steve Sanders and you will learn all about them.
1970 CB750 JDM,1975 GL1000, 1979 GL1000, 1979 CBX, 1995 GL1500, 2000 GL1500CT Valkyrie, 2008 GL1800 Trike.

Offline 78 k550

  • Master
  • *****
  • Posts: 2,479
Re: Goldwing gurus
« Reply #17 on: October 09, 2013, 08:28:46 PM »
Sounds great 83 rims are one year only also if you get them.

not sure who they were from,but ill keep an eye out for saber.thanks

Stay Far Far away.

Paul
Paul
Littleton, CO

76/77 CB 750F, 
75 GL1000, (AKA GL1-242 NGWClub),
76 GL1000 LTD
84 GL1200 Standard
6 Bultaco's= 42, 49, 121, 152, 167, 188

Offline dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,482
Re: Goldwing gurus
« Reply #18 on: October 10, 2013, 02:53:10 PM »
I got the jist guys,thanks
mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3

Offline 78 k550

  • Master
  • *****
  • Posts: 2,479
Re: Goldwing gurus
« Reply #19 on: October 10, 2013, 03:04:16 PM »
It's fun going through a whole pile of new parts isn't it. LOL
I just got the front wheel off the LTD now running down to the shop before they close.

Paul
Paul
Littleton, CO

76/77 CB 750F, 
75 GL1000, (AKA GL1-242 NGWClub),
76 GL1000 LTD
84 GL1200 Standard
6 Bultaco's= 42, 49, 121, 152, 167, 188

Offline Lost and Confused

  • Bob
  • Enthusiast
  • **
  • Posts: 209
  • An old fart !!
Re: Goldwing gurus
« Reply #20 on: October 12, 2013, 06:19:01 AM »
What's easy on these bikes is the fuel pump, it's on the side, easy to get too. Very easy to pull shaft drive and service ie. fluids. Carbs are biggest problem. Loved my 77 naked Gold Wing. A gentleman in Denmark made an offer I couldn't refuse. So it's gone.



Bob

Offline dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,482
Goldwing gurus
« Reply #21 on: October 12, 2013, 09:59:31 AM »
Got em home,i have an 80 interstate and an 81 standard.the po monkeyed with the 81 a bit much,so i think im gonna redo the 80 and put it on the road first
mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3

Offline 78 k550

  • Master
  • *****
  • Posts: 2,479
Re: Goldwing gurus
« Reply #22 on: October 12, 2013, 09:43:45 PM »
you can't really go wrong with an 1100.

Paul
Paul
Littleton, CO

76/77 CB 750F, 
75 GL1000, (AKA GL1-242 NGWClub),
76 GL1000 LTD
84 GL1200 Standard
6 Bultaco's= 42, 49, 121, 152, 167, 188

Offline dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,482
Re: Goldwing gurus
« Reply #23 on: October 13, 2013, 01:31:36 AM »
Im lookin forward to the fun
mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3

Offline dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,482
Re: Goldwing gurus
« Reply #24 on: October 13, 2013, 02:17:30 PM »
Btw paul,no luck on the speedo
mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3