« previous next »
Pages: [1]   Go Down

Author Topic: CB350 pistons to make 836  (Read 1103 times)

0 Members and 1 Guest are viewing this topic.

Offline chris

  • Full Member
  • *
  • Posts: 36
CB350 pistons to make 836
« on: October 28, 2013, 03:58:44 PM »
Could someone please tell me if this is correct and which model 350 what oversize do you get and how much needs to be machined from the top.
Thanks Chris
Logged

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,914
  • Bought her new 4/75
Re: CB350 pistons to make 836
« Reply #1 on: October 28, 2013, 07:21:06 PM »
68+ CB350 twin. 64mm gives you 812. Get 350 +1mm over for 836. As far as the machining goes you may want to PM Big Jay at APE as that's what they made their first kits from. It'd be a lot simpler finding a kit ready to go.
Logged
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline chris

  • Full Member
  • *
  • Posts: 36
Re: CB350 pistons to make 836
« Reply #2 on: October 28, 2013, 07:27:33 PM »
Thanks Gerry where is the best place to get the 836 kit and how much do they cost need high compression for racing
Logged

Offline Sam Green Racing

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: CB350 pistons to make 836
« Reply #3 on: October 28, 2013, 08:25:42 PM »
Click on the APE add on this page, you will find this.

Displacement Bore Size Comp Ratio Part# Manufacturer Requirements Price
836cc 2.599" / 65MM  10.25:1 K836 WISECO Cylinder boring 564.44
836cc 2.599" / 65MM  12.5:1 149295 JE Cylinder boring 575.67

Sam. ;)
Logged
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike
Pages: [1]   Go Up
« previous next »