« previous next »
Pages: [1]   Go Down

Author Topic: '78 CB550 Main Center Stand Installing  (Read 2816 times)

0 Members and 1 Guest are viewing this topic.

Offline DaveBarbier

  • Really Old Timer ...
  • *******
  • Posts: 5,620
'78 CB550 Main Center Stand Installing
« on: October 31, 2013, 02:27:53 PM »
Hey guys, does anyone know where the main stand spring and half round plate attach to on the bike? There's obviously a little notch on the stand but where under the bike? I'm thinking this thing (see photo) but I'm struggling to put it on. Just making sure I'm aiming for the right place.




---
1978 Honda CB550K
Logged

Offline goldarrow

  • one day, i'll be an
  • Old Timer
  • ******
  • Posts: 3,361
Re: '78 CB550 Main Center Stand Installing
« Reply #1 on: October 31, 2013, 02:30:53 PM »
You have it right.  There are few ways you can install it. 
Logged
Life Is Full Of Challenges - And My Backyard Is Full Of SOHC4's

CB550 K0
CB750 K0, K2, K23 JDM, K45, K5
And the little ones z50r, xr50r, st90


750k5 http://forums.sohc4.net/index.php?topic=114817.0

Offline DaveBarbier

  • Really Old Timer ...
  • *******
  • Posts: 5,620
Re: '78 CB550 Main Center Stand Installing
« Reply #2 on: October 31, 2013, 02:34:12 PM »

Quote from: goldarrow on October 31, 2013, 02:30:53 PM
You have it right.  There are few ways you can install it.

Oh ok, thanks! But damn, unless I'm going about it wrong, it is NOT easy to stretch that spring, haha.


---
1978 Honda CB550K
Logged

Offline DaveBarbier

  • Really Old Timer ...
  • *******
  • Posts: 5,620
Re: '78 CB550 Main Center Stand Installing
« Reply #3 on: October 31, 2013, 02:40:01 PM »
Ok, got it. One must use leverage and believe in one's self. I feel like I should be leveling up right now after having completed that.


---
1978 Honda CB550K
Logged

Offline 70CB750

  • Labor omnia vincit improbus.
  • Really Old Timer ...
  • *******
  • Posts: 14,792
  • Northern Virginia
Re: '78 CB550 Main Center Stand Installing
« Reply #4 on: November 01, 2013, 04:53:31 AM »
What worked for me was to install the hinge pin last.
Logged

Offline NobleHops

  • Don ya be callin' me no
  • Expert
  • ****
  • Posts: 1,345
  • Misfit - Tucson, Arizona
Re: '78 CB550 Main Center Stand Installing
« Reply #5 on: November 01, 2013, 06:23:52 AM »
Some folks tie a wide cotton shoelace in a loop, hook it on the end of the spring and use that to stretch it on and others swear by bending the spring momentarily at the coils and inserting as many pennies as needed between the coils to temporarily lengthen it. Then you grab the pennies with pliers and remove.

I lost skin installing these before I sought out better technique and tools :'(
Logged
Nils Menten * Tucson, Arizona, USA

I have a motorcycle problem.

My build thread: NobleHops makes a 400F pretty for his wife: http://forums.sohc4.net/index.php?topic=131210.0

Offline LesterPiglet

  • Old Timer
  • ******
  • Posts: 4,046
  • 1977 CB550F2
Re: '78 CB550 Main Center Stand Installing
« Reply #6 on: November 01, 2013, 06:55:58 AM »
Hinge pin last, same with the side stand.
Logged
'Then' and 'than' are completely different words and have completely different meanings. Same with 'of' and 'have'. Set and sit. There, their and they're. Draw and drawer. Could care less/couldn't care less. Bought/brought FFS.


Les Ross.            Certified by a Professional

Offline DaveBarbier

  • Really Old Timer ...
  • *******
  • Posts: 5,620
Re: '78 CB550 Main Center Stand Installing
« Reply #7 on: November 01, 2013, 04:01:02 PM »
Ha, thanks guys. If I ever need to do it again I'll try the hinge last technique. I just used brute strength...and by that I mean awkwardly pulling a now curved screwdriver.


---
1978 Honda CB550K
Logged
Pages: [1]   Go Up
« previous next »