Author Topic: Stiffer 750 front motor mounts (Read 3613 times)

754 · « **on:** October 31, 2013, 07:19:02 PM »

Cooking up a batch, partly done , will have more pics soon...

BPellerine · « **Reply #1 on:** October 31, 2013, 07:35:04 PM »

nice work cool looking piece !bill

Old Scrambler · « **Reply #2 on:** November 01, 2013, 06:34:10 PM »

Frank..............mark me down for ONE to try out.

ogsmakdade · « **Reply #3 on:** November 01, 2013, 06:54:45 PM »

I'd like to have a set of those

KrautKoffin · « **Reply #4 on:** November 01, 2013, 07:34:03 PM »

Me too!

754 · « **Reply #5 on:** November 01, 2013, 09:33:44 PM »

They are the same as on doctor d,s 75 750F

seanbarney41 · « **Reply #6 on:** November 01, 2013, 11:58:05 PM »

I'd rather learn to make my own, but I'm lazy...and you already have results?

Don R · « **Reply #7 on:** November 13, 2013, 08:04:54 PM »

Snazzy, nice work. I did the double right rear one on my Hot Rod K0.

SOHC4 Cafe Racer Fan · « **Reply #8 on:** November 25, 2013, 02:36:21 PM »

Frank,

Any luck with my request for a front and rear set?

Don

Retro Rocket · « **Reply #9 on:** November 25, 2013, 02:37:45 PM »

Subscribed

754 · « **Reply #10 on:** November 25, 2013, 03:04:19 PM »

Th are about 1/2 done, started working a lot on the new frame kit .
I should ask though, I was going to thin out the middle 1/2 way thru with a rounded edge end mill, but its slow going.. Does anyone want them carved out right thru in the middle ? Will still have good strength.. Saw something like it on a Fuller bike, looked really good..

Ok cut right thru like like left one the alternate is like the other shown

KrautKoffin · « **Reply #11 on:** November 26, 2013, 03:57:34 AM »

Quote from: 754 on November 25, 2013, 03:04:19 PM

Th are about 1/2 done, started working a lot on the new frame kit .
I should ask though, I was going to thin out the middle 1/2 way thru with a rounded edge end mill, but its slow going.. Does anyone want them carved out right thru in the middle ? Will still have good strength.. Saw something like it on a Fuller bike, looked really good..

I wouldn't mind it as long as it's strong and easy on you

BPellerine · « **Reply #12 on:** November 26, 2013, 10:31:20 AM »

both look very trick and nicely done and if they are stronger that is just gravy!bill

ogsmakdade · « **Reply #13 on:** November 26, 2013, 01:08:46 PM »

I like the left one....... count me in for a set when they're ready

SOHC4 Cafe Racer Fan · « **Reply #14 on:** November 26, 2013, 08:40:01 PM »

Quote from: 754 on November 25, 2013, 03:04:19 PM

Th are about 1/2 done, started working a lot on the new frame kit .
I should ask though, I was going to thin out the middle 1/2 way thru with a rounded edge end mill, but its slow going.. Does anyone want them carved out right thru in the middle ? Will still have good strength.. Saw something like it on a Fuller bike, looked really good..

Ok cut right thru like like left one the alternate is like the other shown

Hi Frank,

I'm still down for a set (front and back). I'll stick with your original style (like on Doctor D's) but for a CB750K2.

Let me know when they are ready. I am standing by with payment.

Don

Old Scrambler · « **Reply #15 on:** November 27, 2013, 04:28:17 PM »

Frank..........still want ONE set........front and rear...........could be solid centers as being used on my Salt-Flats project. I ALSO need a blank to machine a third unit for the left front...........I am using an AUTO-frame and that lug is different than the K style. No hurry.........March would be OK.

seanbarney41 · « **Reply #16 on:** November 27, 2013, 11:35:12 PM »

Frank...I could care less what it looks like...just want strong , stiff, and light.

754 · « **Reply #17 on:** December 03, 2013, 11:25:26 AM »

Will has some ready very soon..

seanbarney41 · « **Reply #18 on:** December 03, 2013, 12:59:34 PM »

Frank, do you have a price yet?

754 · « **Reply #19 on:** December 03, 2013, 06:29:32 PM »

The deluxe will include an oversize stud and two custom nuts
Will be around 75.00.. Without fasteners around 60.00
There will also be slimmer ones for less money.

seanbarney41 · « **Reply #20 on:** December 03, 2013, 06:59:21 PM »

awsome. I will be pming you around friday.

ogsmakdade · « **Reply #21 on:** December 03, 2013, 07:24:10 PM »

sounds fair to me. count me in

754 · « **Reply #22 on:** December 04, 2013, 08:58:10 PM »

Here is a few styles.. And the oversize fastener with one of the nuts

seanbarney41 · « **Reply #23 on:** December 05, 2013, 03:07:18 AM »

very nice...I like the beefiness of the solid center one

SOHC4 Cafe Racer Fan · « **Reply #24 on:** December 10, 2013, 08:54:35 AM »

Quote from: seanbarney41 on December 05, 2013, 03:07:18 AM

very nice...I like the beefiness of the solid center one

Me too.
Count me in for a front and rear set with solid centers.

slikwilli420 · « **Reply #25 on:** December 19, 2013, 01:06:36 PM »

When they are ready, I would like a complete set for my '76 750F.

News:

Author Topic: Stiffer 750 front motor mounts (Read 3613 times)