Author Topic: My Stock to Cafe back to Stock Build  (Read 27652 times)

0 Members and 5 Guests are viewing this topic.

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,020
  • I refuse...
Re: My Stock to Cafe back to Stock Build
« Reply #100 on: September 01, 2014, 11:45:06 AM »
Did it switch "Off" previously? Lots of bikes have an always "on" wires system, only interrupted during start to minimize the drain on the electrical system.
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline albertaboy

  • No way I'm a
  • Hot Shot
  • ***
  • Posts: 396
Re: My Stock to Cafe back to Stock Build
« Reply #101 on: September 01, 2014, 04:04:25 PM »
Did it switch "Off" previously? Lots of bikes have an always "on" wires system, only interrupted during start to minimize the drain on the electrical system.
I can't remember. I didn't get much time on it to become familiar. At this point, it is a switch that doesn't function at all I am sure the inspectors won't ignore it.  I would like it to work correctly regardless and I don't expect I'll get an inspection booking so quick that I can't get back out for a look.   Lol, I could still argue it's a custom feature, that doesn't affect anything safety wise  ;D  Im sure rat rods and customs have been brought in from elsewhere that pass inspection.  We'll see.
1975 CB750K
No where to go and all day to get there.
My build thread: http://forums.sohc4.net/index.php?topic=131424.0

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: My Stock to Cafe back to Stock Build
« Reply #102 on: September 02, 2014, 02:18:48 PM »
Alberta,

Are you using the Cycle X spin on oil filter?  If so, what type of filter are you using?  It looks different than the one that came with my rig.  I think their set up uses a Harley size filter.
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline albertaboy

  • No way I'm a
  • Hot Shot
  • ***
  • Posts: 396
Re: My Stock to Cafe back to Stock Build
« Reply #103 on: September 03, 2014, 02:15:44 AM »
Alberta,

Are you using the Cycle X spin on oil filter?  If so, what type of filter are you using?  It looks different than the one that came with my rig.  I think their set up uses a Harley size filter.
Mine did not come from Cycle X. An ebay seller some time ago. I can check that filter when I get home but having just checked the cycle x site, the two adapters look completely different.
1975 CB750K
No where to go and all day to get there.
My build thread: http://forums.sohc4.net/index.php?topic=131424.0

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: My Stock to Cafe back to Stock Build
« Reply #104 on: September 03, 2014, 10:00:21 AM »
Thx.  It could have been made by Terry - I believe he used to make them as well. 

Have you already sourced a pair of Lesters? 
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline albertaboy

  • No way I'm a
  • Hot Shot
  • ***
  • Posts: 396
Re: My Stock to Cafe back to Stock Build
« Reply #105 on: September 03, 2014, 03:12:45 PM »
Thx.  It could have been made by Terry - I believe he used to make them as well. 

Have you already sourced a pair of Lesters? 
That filter is a QS3614. It measures 3 inches across if it's just a matter of ensuring the rubber sealing lip will contact. It might of been Terry's. I think it came from an USA address though. I can't find the paperwork for anymore.

I'm still keeping my eye open for cb750 Lesters. Any ideas?  :)
1975 CB750K
No where to go and all day to get there.
My build thread: http://forums.sohc4.net/index.php?topic=131424.0

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: My Stock to Cafe back to Stock Build
« Reply #106 on: September 03, 2014, 03:18:23 PM »
I used to have an extra spin off adapter made by Terry. 

Lesters are one of those things you sometimes get luck with on craigslist or ebay.  I've wanted to use mags for a while, but I want a set of 18" front and rear.
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline albertaboy

  • No way I'm a
  • Hot Shot
  • ***
  • Posts: 396
Re: My Stock to Cafe back to Stock Build
« Reply #107 on: September 04, 2014, 04:06:32 PM »
My bike passed the government inspection today!!!! ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D  Just have to get a license plate now.
1975 CB750K
No where to go and all day to get there.
My build thread: http://forums.sohc4.net/index.php?topic=131424.0

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: My Stock to Cafe back to Stock Build
« Reply #108 on: September 04, 2014, 04:15:37 PM »
My bike passed the government inspection today!!!! ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D  Just have to get a license plate now.

Kick a$$!! Congratulations!  Get that plate and ride the bejeezus out of it (at least while you have good weather)!!
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline albertaboy

  • No way I'm a
  • Hot Shot
  • ***
  • Posts: 396
Re: My Stock to Cafe back to Stock Build
« Reply #109 on: September 06, 2014, 04:03:52 PM »
First (of many) shake down run revealed a head gasket leak. If you read my general forum post for help, it must be the 8 o rings I left in between the cylinder and head. When using a Mls gasket, they should be left out.  Every post I read made it sound like an option so naturally, I choose the wrong option. lol.  ;D  I've dove into the repair but It will be about Tuesday before the bike is all back together. 

And the forecast calls for freezing temps for Thursday....  :(
1975 CB750K
No where to go and all day to get there.
My build thread: http://forums.sohc4.net/index.php?topic=131424.0

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,020
  • I refuse...
Re: My Stock to Cafe back to Stock Build
« Reply #110 on: September 06, 2014, 04:10:54 PM »
Sounds like you'll get it just right, just in time for winter  :-\

So the good news is: come Spring, you'll be ready to ride!
Bad news: you need a new Winter PROJECT!

How about a 550 this go around?
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline albertaboy

  • No way I'm a
  • Hot Shot
  • ***
  • Posts: 396
Re: My Stock to Cafe back to Stock Build
« Reply #111 on: September 06, 2014, 06:21:15 PM »
Sounds like you'll get it just right, just in time for winter  :-\

So the good news is: come Spring, you'll be ready to ride!
Bad news: you need a new Winter PROJECT!

How about a 550 this go around?

lol. I'm thinking of studding the tires or maybe I'll consider that snow mobile conversion that showed up on the forum and botm recently.  That thing is  8) cool.

Hey
Anybody know if the MLS gaskets have a proper orientation to up or down. The indents in this one looks more definitive on one side verses the other.  I've seen no instructions.
1975 CB750K
No where to go and all day to get there.
My build thread: http://forums.sohc4.net/index.php?topic=131424.0

Offline albertaboy

  • No way I'm a
  • Hot Shot
  • ***
  • Posts: 396
Re: My Stock to Cafe back to Stock Build
« Reply #112 on: September 09, 2014, 09:54:39 PM »
If you've followed my MLS gasket leak post, much as been discussed there.

I opened the top end, thankful I installed a frame kit, removed the 8 packing type o-rings and associated dowels. Sprayed my MLS gasket with copper spray, oiled the cylinder studs and torqued them again. Bought a better quality torque wrench so I could feel I had the most accurate reading I could get.  I just came in from the garage after completely reassembling the bike again. I ran it to a full warm up and so far no leak. ;D ;D ;D ;D I really wont get out for a ride until Friday, weather permitting, and that will be the real test.

I also ran out today and officially registered the bike with the Motor Vehicles division. It's officially road legal. Man, I tell you, obtaining a passing safety inspection and obtaining a registration (title) for the bike truly was like getting a trophy.  ;D ;D ;D ;D ;D
1975 CB750K
No where to go and all day to get there.
My build thread: http://forums.sohc4.net/index.php?topic=131424.0

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: My Stock to Cafe back to Stock Build
« Reply #113 on: September 09, 2014, 09:57:37 PM »
Double win on the leak fix and registration.
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline albertaboy

  • No way I'm a
  • Hot Shot
  • ***
  • Posts: 396
Re: My Stock to Cafe back to Stock Build
« Reply #114 on: September 13, 2014, 10:36:39 PM »
So the test ride didn't go well.  :( The leak was as bad. Although I removed the dowels and their packing o-rings, turns out my MLS gasket had the large holes to accommodate the dowels and rings. So go figure. :-\  It was suggested to check the positioning dowels and though I doubted they were the problem, but I couldn't be sure,  I dove back in and checked them to be Ok. I had ground enough off for clearance.  I am the first in the world to have a MLS gasket fail I think.  I can't determine what I've done wrong if I have. As another test, I had removed all o rings, dowels and the gasket and set the head down onto the cylinder and can see no interference that would prevent a good gasket squish. 

Now I've placed the paper/fiber type gasket that came with my ebay pistons.  I've put the dowels and o-rings back in, sprayed the gasket with copper coat and torqued to 21 lbs. Tomorrow, I will second torque and put it all back together again.  Crossing my fingers.

Thankfully, I put in a frame kit. :) Thankfully, I have a patient wife as the honey do list is waiting another week.  ;D

Oh, Almost forgot... my head light on/off switch now operates like it should.  It's either a flaky switch or the safety inspector fiddled with it. I'm thinking flaky switch as I'm sure he would have said something.
« Last Edit: September 13, 2014, 10:39:14 PM by albertaboy »
1975 CB750K
No where to go and all day to get there.
My build thread: http://forums.sohc4.net/index.php?topic=131424.0

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: My Stock to Cafe back to Stock Build
« Reply #115 on: September 13, 2014, 10:38:23 PM »
Been there, and I feel your pain.
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline albertaboy

  • No way I'm a
  • Hot Shot
  • ***
  • Posts: 396
Re: My Stock to Cafe back to Stock Build
« Reply #116 on: September 13, 2014, 10:39:50 PM »
Been there, and I feel your pain.
Was it a MLS gasket problem?
1975 CB750K
No where to go and all day to get there.
My build thread: http://forums.sohc4.net/index.php?topic=131424.0

Offline albertaboy

  • No way I'm a
  • Hot Shot
  • ***
  • Posts: 396
Re: My Stock to Cafe back to Stock Build
« Reply #117 on: September 14, 2014, 07:47:27 PM »
Head gasket leak solved.  ;D ;D Put about 25 miles on it and no evident leak. Minor leak coming from the plug recess but I can live with it for now and it will be an easy fix. I will get a bit or riding in before the cold and snow comes.  :)
1975 CB750K
No where to go and all day to get there.
My build thread: http://forums.sohc4.net/index.php?topic=131424.0

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: My Stock to Cafe back to Stock Build
« Reply #118 on: September 14, 2014, 10:24:16 PM »
 Great, hope you get a few rides in yet..
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline albertaboy

  • No way I'm a
  • Hot Shot
  • ***
  • Posts: 396
Re: My Stock to Cafe back to Stock Build
« Reply #119 on: September 17, 2014, 02:28:11 PM »
The weather has smartened up here. Supposed to be nice all week. I chucked the honey do list aside today and plan to tell my wife I was ill and had to lay down  ;D  Worked on a crank seal leak. Put a new one in with Honda bond. I'm not willing to pull the engine, split the cases this year. I had a leak at the alt cover. Pulled that, fresh Hondabond.  Got out for an hour around town. Presto!! No leaks. Even the top end leak from the pucks or cam tower studs has slowed down or maybe sealed up..... idk.  Feeling a bit better now... maybe can find the energy to get back to work.... ;)
1975 CB750K
No where to go and all day to get there.
My build thread: http://forums.sohc4.net/index.php?topic=131424.0

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: My Stock to Cafe back to Stock Build
« Reply #120 on: September 17, 2014, 02:57:19 PM »
You're never too old to play the "sick" card.

Remember to go to the BOTM Voting Thread and post a summary of your build, your trials and tribulations, some before, in progress and AFTER photos.  We all like hearing the "story" behind the build.  Good luck!
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: My Stock to Cafe back to Stock Build
« Reply #121 on: September 17, 2014, 03:08:41 PM »
What did you end up doing with the shiny Yamiya Yosh replica pipe?
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,020
  • I refuse...
Re: My Stock to Cafe back to Stock Build
« Reply #122 on: September 17, 2014, 03:37:59 PM »
Man that bike looks brilliant!!!!!
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline albertaboy

  • No way I'm a
  • Hot Shot
  • ***
  • Posts: 396
Re: My Stock to Cafe back to Stock Build
« Reply #123 on: September 17, 2014, 04:19:20 PM »
What did you end up doing with the shiny Yamiya Yosh replica pipe?
Good timing. Plan to post it for sale. Just found a box I think will work for shipping. Will send a PM.
1975 CB750K
No where to go and all day to get there.
My build thread: http://forums.sohc4.net/index.php?topic=131424.0

Offline albertaboy

  • No way I'm a
  • Hot Shot
  • ***
  • Posts: 396
Re: My Stock to Cafe back to Stock Build
« Reply #124 on: September 17, 2014, 04:52:53 PM »
You're never too old to play the "sick" card.

Remember to go to the BOTM Voting Thread and post a summary of your build, your trials and tribulations, some before, in progress and AFTER photos.  We all like hearing the "story" behind the build.  Good luck!
Will do and Thanks. ;)

Man that bike looks brilliant!!!!!

Thank you Sir!!.  I have received great comments from people like the bike inspector to different friends who are just seeing for the first time since I restored it.  Everybody likes to look at a classic.  Makes it all fun and worth while.
1975 CB750K
No where to go and all day to get there.
My build thread: http://forums.sohc4.net/index.php?topic=131424.0