« previous next »
Pages: [1]   Go Down

Author Topic: Source for superbike/Euro bars with 120mm (4.75") centre?  (Read 682 times)

0 Members and 1 Guest are viewing this topic.

Offline evanphi

  • Apparently I'm an
  • Old Timer
  • ******
  • Posts: 3,107
  • Rhonda the Basket Case
Source for superbike/Euro bars with 120mm (4.75") centre?
« on: November 10, 2013, 07:36:24 pm »
I got superbike bars from vintagecb750.com, but the centre width is about a half inch too short, and that dimension wasn't listed on the site.  >:( :o

So I need to know: who makes/where can I order a set of superbike/Euro bars that have the 120mm/4.75" clamp width?
Logged
--Evan

1975 CB750K "Rhonda"
Delkevic Stainless 4-1 Header, Cone Engineering 18" Quiet Core Reverse Cone, K&N Filter in Drilled Airbox
K5 Crankcase/Frame, K4 Head and Cylinders, K1 Carbs (42;120;1 Turn)

She's a mix-matched (former) basket case, but she's mine.

CB750 Shop Manual (all years), searchable text PDF
Calculating the correct input circumference for digital speedometers connected to the original speedometer drive

Offline Djfob

  • Hot Shot
  • ***
  • Posts: 313
Re: Source for superbike/Euro bars with 120mm (4.75") centre?
« Reply #1 on: November 10, 2013, 07:44:39 pm »
Logged
78 CB750k

Black 750K8

  • Guest
Re: Source for superbike/Euro bars with 120mm (4.75") centre?
« Reply #2 on: November 10, 2013, 09:56:17 pm »
http://www.flandersco.com/

Not cheap but very good quality.
Logged
Pages: [1]   Go Up
« previous next »