Author Topic: FOR SALE - A Parts/Bikes  (Read 16705 times)

0 Members and 1 Guest are viewing this topic.

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 13,327
  • Saver of unloved motorcycles.
Re: FOR SALE - A Parts/Bikes
« Reply #100 on: June 19, 2019, 02:35:02 pm »
A stock carbs, need rebuilt not molested. $50 and the ride, always willing to trade for K0 or early 750 stuff.  I have the A Handlebars also. Also a head that needs rebuilt and cylinders that could go overbore.  I'll guess some prices when I get a minute.

 https://photos.app.goo.gl/CJZo4C8S8vfbAShi7
« Last Edit: June 27, 2019, 07:29:52 am by Don R »
No matter how many times you paint over a shadow, it's still there.

Offline sbanerdt

  • New Member
  • Posts: 1
Re: FOR SALE - A Parts/Bikes
« Reply #101 on: December 18, 2019, 11:19:29 am »
Unfortunately I think I have 4 side covers that are all beyond repair.

Guessing the seat and tank would be cost-prohibative to ship, but you're welcome to get a quote from 97213 if you want
I just need the pin assembly with spring that goes with the side cover if you have one.

Offline rb550four

  • Master
  • *****
  • Posts: 2,278
  • I'm nobody's slave and nobody's master
Re: FOR SALE - A Parts/Bikes
« Reply #102 on: December 23, 2019, 06:52:37 pm »
Hi Guys,
  I'm looking for a neutral return shifter, and the linkage that goes to the kick stand on a 78 hondamatic. PO thought this set up wasn't necessary and tossed it, I never had a Hondamatic before and I'm guessin that this would be a good safety item that I would be interested in having on this machine before I start it for it's first fire in years. Would anyone know where I might find one  without going on ebay or would someone here have one that they would like to sell?.
   I'll check back on this thread but it would be better to PM me if you have this set up for sale. Thank you RB
A few Honda 500's, a few Honda 550's, a few Honda 650's, '72 cb 450, a couple 500/550/650 hybrids, and 2001 750. 
  550 Snowbike -Somebody had to do it.
  http://forums.sohc4.net/index.php/topic,101678.0.html             
http://forums.sohc4.net/index.php/topic,137317.msg1550907.html#msg1550907

Online CB_Jeff

  • Enthusiast
  • **
  • Posts: 184
Re: FOR SALE - A Parts/Bikes
« Reply #103 on: January 19, 2020, 03:03:02 pm »
I posted this on the Wanted page, figured I would post it here too.  Looking for a 750a rear Comstar set up for a drum brake.   Future auto project that I am gathering parts for.

Offline ebrown0104

  • Full Member
  • *
  • Posts: 18
Re: FOR SALE - A Parts/Bikes
« Reply #104 on: May 17, 2020, 09:54:53 pm »
I'm looking for an A model kickstand, if anyone has one they want to give up.  Thanks!

Offline howdisrespectful

  • Full Member
  • *
  • Posts: 16
Re: FOR SALE - A Parts/Bikes
« Reply #105 on: July 01, 2020, 11:55:18 pm »
Hello

I am selling a set of '77 CB750A carburetors. They came on a cb550 I purchased a year ago and have been using them regularly. I finally got a set of correct carbs and don't need these anymore.

They are the PD44B model and are jetted as follows:
108 main
38 slow
200 air jets
150 slow air jet

I have cleaned them by hand twice in the past year so they are not very dirty (internally) but they need some new o-rings.
The only important things to note are:

1. a small hole on the shaft of carb #1 (carbs3.jpg) It goes all the way through but it doesn't seem to affect performance. I covered it with tape.
2. three float bowls face in one direction which makes it a pain in the wrist to access all drain screws.

besides that they are a-ok!
The lighting in the pictures is not ideal so if anyone would like specifics just ask.

PM me an offer!

Edit: Also open to trades - especially '77-'78 cb550 stuff
« Last Edit: July 02, 2020, 12:01:50 am by howdisrespectful »

Offline ted.deharo

  • Full Member
  • *
  • Posts: 2
Re: FOR SALE - A Parts/Bikes
« Reply #106 on: November 04, 2020, 07:57:01 am »
I’m looking for a set of Chrome 4 - 2 exhaust for 1977

Offline bear

  • Vale Bill McIntosh ......"illegitimi non carborundum"
  • Master
  • *****
  • Posts: 2,359
  • Leeton in Australia
Re: FOR SALE - A Parts/Bikes
« Reply #107 on: November 13, 2020, 08:23:06 pm »
Looking for a rear grab rail/indicator mount for a 1977 CB750A.

Cheers,
Brian
The older I get the faster I was.

Offline bear

  • Vale Bill McIntosh ......"illegitimi non carborundum"
  • Master
  • *****
  • Posts: 2,359
  • Leeton in Australia
Re: FOR SALE - A Parts/Bikes
« Reply #108 on: February 07, 2021, 07:13:24 pm »
Looking for a front brake mount, L/H sidecover and front guard  for a '76A
Cheers,
Brian
The older I get the faster I was.

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 28,476
Re: FOR SALE - A Parts/Bikes
« Reply #109 on: February 18, 2021, 10:04:26 am »
Are you talking caller hanger ? Do you have the caliper ?  Or any of the mount T.
 It should be smooth caliper I think, same part as 75, 76 750F model, and 77,78 K 750..
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline ebrown0104

  • Full Member
  • *
  • Posts: 18
Re: FOR SALE - A Parts/Bikes
« Reply #110 on: February 18, 2021, 10:48:57 am »
I have a few parts I removed from my 78 A listed on ebay:

Lower fork legs - https://www.ebay.com/itm/124576457231
Brake rotor - https://www.ebay.com/itm/124560846240
Rectifier - https://www.ebay.com/itm/124513649070

Offline bear

  • Vale Bill McIntosh ......"illegitimi non carborundum"
  • Master
  • *****
  • Posts: 2,359
  • Leeton in Australia
Re: FOR SALE - A Parts/Bikes
« Reply #111 on: February 18, 2021, 08:02:18 pm »
Are you talking caller hanger ? Do you have the caliper ?  Or any of the mount T.
 It should be smooth caliper I think, same part as 75, 76 750F model, and 77,78 K 750..

Thanks for that Frank I will check the part numbers out.
The older I get the faster I was.