Author Topic: FOR SALE - A Parts/Bikes  (Read 30470 times)

0 Members and 4 Guests are viewing this topic.

Offline dave the welder

  • dave the welder
  • Hot Shot
  • ***
  • Posts: 500
Re: FOR SALE - A Parts/Bikes
« Reply #50 on: April 15, 2015, 05:13:13 PM »
have for sale a 1977 750 matic 32,000 miles upgraded to round top carbsoff a k4 with cam from same.chain,sprockets, gel battery all new 2 years ago. exhaust has Triumph off road mufflers.NOT loud. tires good runs very good.took it out last sunday for a 100 mile run.asking $1,800.clear title in my name
don't buy it build it

Offline dave the welder

  • dave the welder
  • Hot Shot
  • ***
  • Posts: 500
Re: FOR SALE - A Parts/Bikes
« Reply #51 on: April 15, 2015, 05:32:32 PM »
1978 750 a 2,200 miles runs, shifts, stops.missing grips, mirrors, headlight, kickstarter. exhaust is nice.not mint but nice. I rebuilt the master cyl and caliper.not seen in pick a have 1  side covers seat air filter just about all the parts asking $1,000
« Last Edit: September 06, 2018, 11:35:22 AM by dave the welder »
don't buy it build it

Offline mgl01

  • Full Member
  • *
  • Posts: 11
Re: FOR SALE - A Parts/Bikes
« Reply #52 on: April 20, 2015, 05:46:59 AM »
Looking for a 1978 750a airbox - anyone that's done a filter changeout have one sitting on their shelf theyd want to part with?


Offline dave the welder

  • dave the welder
  • Hot Shot
  • ***
  • Posts: 500
Re: FOR SALE - A Parts/Bikes
« Reply #53 on: April 20, 2015, 01:55:28 PM »
got one for a 77A.will that work??
don't buy it build it

Offline mgl01

  • Full Member
  • *
  • Posts: 11
Re: FOR SALE - A Parts/Bikes
« Reply #54 on: April 20, 2015, 02:54:44 PM »
I think it would - carb hoses are the same - not sure about vacuum line connection - can you post a pic?

Offline dave the welder

  • dave the welder
  • Hot Shot
  • ***
  • Posts: 500
Re: FOR SALE - A Parts/Bikes
« Reply #55 on: April 20, 2015, 04:42:20 PM »
let me find it in barn will try later tonight or tomorrow
don't buy it build it

Offline dave the welder

  • dave the welder
  • Hot Shot
  • ***
  • Posts: 500
Re: FOR SALE - A Parts/Bikes
« Reply #56 on: April 20, 2015, 04:55:05 PM »
compared the one off my 77 to the one off my 78 they are the same as you can see in pic#3 the po attempted a repair. don't know the value shoot me an offer
don't buy it build it

Offline dave the welder

  • dave the welder
  • Hot Shot
  • ***
  • Posts: 500
Re: FOR SALE - A Parts/Bikes
« Reply #57 on: April 25, 2015, 06:32:55 AM »
dropped the price on each bike $100 bucks 77 asking 1,700  the 78 asking 1400
don't buy it build it

Offline dave the welder

  • dave the welder
  • Hot Shot
  • ***
  • Posts: 500
Re: FOR SALE - A Parts/Bikes
« Reply #58 on: May 03, 2015, 10:33:04 AM »
help me out here.are my prices reasonable, to high,to low???????? t thought I was in the ballpark compared to what else I see on craigslist and ebay 
don't buy it build it

Offline dave the welder

  • dave the welder
  • Hot Shot
  • ***
  • Posts: 500
Re: FOR SALE - A Parts/Bikes
« Reply #59 on: May 15, 2015, 09:36:50 AM »
final price DROP.for the 77 1,200 bucks. for the 78 1,000 bucks
don't buy it build it

Offline TurboD

  • Hot Shot
  • ***
  • Posts: 680
Re: FOR SALE - A Parts/Bikes
« Reply #60 on: May 27, 2015, 05:34:46 PM »
I am looking for a good usable left side cover for 76 -78 CB750A Hondamatic. Anyone have one?? Thanks

Offline b5rider

  • Hot Shot
  • ***
  • Posts: 293
Re: FOR SALE - A Parts/Bikes
« Reply #61 on: July 01, 2015, 07:43:32 AM »
final price DROP.for the 77 1,200 bucks. for the 78 1,000 bucks

Why are you so far?!! good luck with the sale
1984 Honda Elite 150
1998 Yamaha 650
2004 Honda 750 ACE
1975 CB550
1978 CB400A
1978 CB550 now 603cc w/sidecar

The key to life is to make sure the line to put flowers on your grave is longer than the one to piss on it.

Offline zachk94

  • Full Member
  • *
  • Posts: 1
Re: FOR SALE - A Parts/Bikes
« Reply #62 on: July 05, 2015, 02:29:21 PM »
I have a 1978 CB750A Hondamatic that I bought from my grandpa last year. It was good, with no issues until one of the carbs started leaking gas. I took it to a motorcycle repair shop where the carburetors were professionally cleaned and tuned, and the leak was fixed. The gas tank has a dent in it, but the bike has never been laid down. Only 23k miles on the bike.

Good:
-New handlebars/bar-end mirror/wiring harness
-Starts right up every time
-Good charging system
-Good battery
-Newly cleaned and polished carbs (new gaskets/accelerator pump)
-Good upholstery
-Clean title in my name
-Under 25k miles

Bad:
-Bad seal on the carbs-engine boots produces rough idle and backfire after heavy acceleration
-Paint job is old
-Dent in fuel tank
-Muffler damage (left side, can be seen in photo)

I'm in Denver, CO. Shoot me an email at zachk94@gmail.com or text/call at (720) 483-- 2292. Leave a voicemail if no answer.

-Zach

Offline dave the welder

  • dave the welder
  • Hot Shot
  • ***
  • Posts: 500
Re: FOR SALE - A Parts/Bikes
« Reply #63 on: July 05, 2015, 06:50:17 PM »
price?????????????
don't buy it build it

Offline mdl91881

  • Full Member
  • *
  • Posts: 23
Re: FOR SALE - A Parts/Bikes
« Reply #64 on: August 17, 2015, 05:04:24 PM »
Im going to start parting out my 76 CB750A and wanted to give the guys here first dibs on any parts they might need.  Bike doesn't have tank/seat/side panels/carbs/motor.  The rest is pretty complete.  I do have kick start handle, tool kit, and 18"/16" lester mags on the parts bike.  If there is anything you need shoot me a pm with what you need and an offer. 

Offline Bokeh

  • Full Member
  • *
  • Posts: 69
Re: FOR SALE - A Parts/Bikes
« Reply #65 on: August 25, 2015, 10:36:15 PM »
How much you askin for the Lesters?  Do ya have a parking brake cable? Torque Converter trim cover (need a clean one with no dent)? Could also use same condition rear fender.

Offline mdl91881

  • Full Member
  • *
  • Posts: 23
Re: FOR SALE - A Parts/Bikes
« Reply #66 on: August 26, 2015, 04:53:15 PM »
Lesters aren't available anymore.  I do have a parking brake cable, it has a small crack in the plastic knob but still very useable. I also have a non dented cover but there is some surface rust on it.  Rear fender is pretty rough.

Offline mdl91881

  • Full Member
  • *
  • Posts: 23
Re: FOR SALE - A Parts/Bikes
« Reply #67 on: September 14, 2015, 04:10:19 PM »
Im looking for a rear brake spindle for a 77 Cb750A. Also trying to find a gasket for the parking brake cover.

Offline 7T1Burb

  • Full Member
  • *
  • Posts: 23
Re: FOR SALE - A Parts/Bikes
« Reply #68 on: October 25, 2015, 08:37:15 AM »
Thanks to all for the information provided on the 10 month rebuild of my 1977 750A that is finally done!!  Now...on to the next 750A rebuild.

I currently have it posted on the Norfolk, VA Craigslist @ http://norfolk.craigslist.org/mcy/5485903752.html

Thank you again!

SOLD................
« Last Edit: July 09, 2016, 03:20:24 PM by 7T1Burb »

Offline JimG

  • Full Member
  • *
  • Posts: 1
Re: FOR SALE - A Parts/Bikes
« Reply #69 on: March 11, 2016, 10:32:06 AM »
Just a heads up for '76 CB750A folks, Part Number 17253-393-300 Air box to carb boots, will be available soon. I had a company make a set from a really nice original, and I should have the prototypes in hand any day now and will spread the word once fitment is verified.

Offline nixon

  • Enthusiast
  • **
  • Posts: 169
Re: FOR SALE - A Parts/Bikes
« Reply #70 on: April 19, 2016, 02:14:41 PM »
Price?
cb750a 77, cbr900rr 93 with auto clutch

Riding tip " turn in late, feeling great.  Turn in early,  feeling squirrely "

Offline Bigbear6598

  • Full Member
  • *
  • Posts: 1
Re: FOR SALE - A Parts/Bikes
« Reply #71 on: April 27, 2016, 06:27:49 AM »
Just got a 77' CB750A.  I'm looking for some parts.  Both side panels, Tool Kit, Fuel solenoid valve, Rear turn signals, Front fork Honda Logo and Logo plate.  Eventually I'll need a set of carbs. They were corroded pretty bad but I got em working pretty good right now.  Thanks for any help.

Offline Cougars750F0

  • Hot Shot
  • ***
  • Posts: 314
Re: FOR SALE - A Parts/Bikes
« Reply #72 on: May 23, 2016, 07:20:36 PM »
Going to part out a running 77 750A 44K Has title.  The only items I don't have are the headlight bucket, fork ears and front signals. Also a spare low miles 10K or less engine, vintage Wixom Brothers fairing with all mounting hardware, racks and other various parts. Let me know what you need. Willing to sell it as a running bike also if there is any interest I'm located   Coos Bay, OR 97420
« Last Edit: May 23, 2016, 07:22:58 PM by Cougars750F0 »
1970 Honda / Yoshimura 810 with ported head, 1968  Honda CB450 5 speed European model, 1973  Triumph Bonneville 750 twin carburetor model, 1975 Honda 750F0 Super Sport, 1977 Honda 750A

Offline Jdensmore

  • Full Member
  • *
  • Posts: 9
Re: FOR SALE - A Parts/Bikes
« Reply #73 on: July 06, 2016, 08:18:34 PM »
You still have the fairing and mounts?

Offline Cougars750F0

  • Hot Shot
  • ***
  • Posts: 314
Re: FOR SALE - A Parts/Bikes
« Reply #74 on: July 06, 2016, 08:32:55 PM »
 Sorry I no longer have the fairing.
1970 Honda / Yoshimura 810 with ported head, 1968  Honda CB450 5 speed European model, 1973  Triumph Bonneville 750 twin carburetor model, 1975 Honda 750F0 Super Sport, 1977 Honda 750A