Topic: FOR SALE - A Parts/Bikes

[sbanerdt]

Unfortunately I think I have 4 side covers that are all beyond repair.

Guessing the seat and tank would be cost-prohibative to ship, but you're welcome to get a quote from 97213 if you want

I just need the pin assembly with spring that goes with the side cover if you have one.

[rb550four]

Hi Guys,
  I'm looking for a neutral return shifter, and the linkage that goes to the kick stand on a 78 hondamatic. PO thought this set up wasn't necessary and tossed it, I never had a Hondamatic before and I'm guessin that this would be a good safety item that I would be interested in having on this machine before I start it for it's first fire in years. Would anyone know where I might find one  without going on ebay or would someone here have one that they would like to sell?.
   I'll check back on this thread but it would be better to PM me if you have this set up for sale. Thank you RB

[CB_Jeff]

I posted this on the Wanted page, figured I would post it here too.  Looking for a 750a rear Comstar set up for a drum brake.   Future auto project that I am gathering parts for.

[ebrown0104]

I'm looking for an A model kickstand, if anyone has one they want to give up.  Thanks!

[howdisrespectful]

Hello

I am selling a set of '77 CB750A carburetors. They came on a cb550 I purchased a year ago and have been using them regularly. I finally got a set of correct carbs and don't need these anymore.

They are the PD44B model and are jetted as follows:
108 main
38 slow
200 air jets
150 slow air jet

I have cleaned them by hand twice in the past year so they are not very dirty (internally) but they need some new o-rings.
The only important things to note are:

1. a small hole on the shaft of carb #1 (carbs3.jpg) It goes all the way through but it doesn't seem to affect performance. I covered it with tape.
2. three float bowls face in one direction which makes it a pain in the wrist to access all drain screws.

besides that they are a-ok!
The lighting in the pictures is not ideal so if anyone would like specifics just ask.

PM me an offer!

Edit: Also open to trades - especially '77-'78 cb550 stuff

[ted.deharo]

I’m looking for a set of Chrome 4 - 2 exhaust for 1977

[bear]

Looking for a rear grab rail/indicator mount for a 1977 CB750A.

Cheers,
Brian

[bear]

Looking for a front brake mount, L/H sidecover and front guard  for a '76A
Cheers,
Brian

[754]

Are you talking caller hanger ? Do you have the caliper ?  Or any of the mount T.
 It should be smooth caliper I think, same part as 75, 76 750F model, and 77,78 K 750..

[ebrown0104]

I have a few parts I removed from my 78 A listed on ebay:

Lower fork legs - https://www.ebay.com/itm/124576457231
Brake rotor - https://www.ebay.com/itm/124560846240
Rectifier - https://www.ebay.com/itm/124513649070

[bear]

Are you talking caller hanger ? Do you have the caliper ?  Or any of the mount T.
 It should be smooth caliper I think, same part as 75, 76 750F model, and 77,78 K 750..

Thanks for that Frank I will check the part numbers out.

[BRAZEN]

Hey everyone-
I’m new here and also the new owner of a sweet ‘78 Hondamatic 750A-

Everything’s good with it but I’m looking for a stock speedometer; the one I have is in bad shape-

If there’s anyone out there that can help me out, I really would appreciate it-

Thanks in advance-

[DeathMammoth]

Hello,

I have a 1976 Honda CB750A and I am looking for a kick starter lever for it. Definitely let me know if anyone has one for sale. Many thanks!! 

[TdLpps]

In cleaning up my garage I discovered a Hondamatic Kick Starter.  Price includes USPS Priority Shipping.

Honda CB750A 1976-1978 Kick Starter and Mounting Bracket. Impossible to find in any condition, the original temporary kick starter is the holy grail of Hondamatic Parts. Includes mounting bracket which is just as hard to find. In excellent condition. $100 shipped to the lower 48.

[Tenn_CB400f]

I have this in the free stuff area as well, but it appears this is a rear wheel for a 750A. Located in Knoxville, TN 37917.

[Kashmired]

So im cleaning up around the shop and have a bunch of parts off a 76 CB750A id like out of the way. Located outside Pittsburgh PA. Cylinders, head, complete bottom end, Comstar wheels that were on it, parking brake parts, electrical. Ill sell any/all of it cheap and can ship smaller parts. Also have a complete bike in storage that i havent even seen in a few years id sell as well. Ill attach a few pictures when i get around to them.