« previous next »
Pages: [1]   Go Down

Author Topic: Where does this Wire Go cb750K5  (Read 581 times)

0 Members and 1 Guest are viewing this topic.

Offline grepper

  • Busted Knuckles
  • Enthusiast
  • **
  • Posts: 166
Where does this Wire Go cb750K5
« on: November 15, 2013, 06:22:50 AM »
I thought I took enough pictures before I disassembled the bike, now I'm putting the wiring back together and can't figure out where this green wire mounts.  1975 CB750K


Also, if anyone else knows of some good threads showing where all the wiring is routed, please post links.
Logged

DH

  • Guest
Re: Where does this Wire Go cb750K5
« Reply #1 on: November 15, 2013, 06:29:26 AM »
I believe that's a ground wire that is bolted to the frame via the lower seat lock bolt IIRC..
« Last Edit: November 15, 2013, 07:04:20 AM by DH »
Logged

Offline goldarrow

  • one day, i'll be an
  • Old Timer
  • ******
  • Posts: 3,360
Re: Where does this Wire Go cb750K5
« Reply #2 on: November 15, 2013, 06:29:50 AM »
That green is ground to frame near by battery under the seat.  Manual will show you where to route the harness
Logged
Life Is Full Of Challenges - And My Backyard Is Full Of SOHC4's

CB550 K0
CB750 K0, K2, K23 JDM, K45, K5
And the little ones z50r, xr50r, st90


750k5 http://forums.sohc4.net/index.php?topic=114817.0

Offline grepper

  • Busted Knuckles
  • Enthusiast
  • **
  • Posts: 166
Re: Where does this Wire Go cb750K5
« Reply #3 on: November 15, 2013, 08:11:01 AM »
Thanks guys, that makes sense.  The seat lock was still on in my pictures, so I didn't see it.  And well...  I disassembled the bike last spring.  My memory is not what it used to be.

An other related question here...  When I bought this bike the ground wire from the battery is short and attached to one of the tool tray mounting bolts.   I've seen other pictures, and like the one DH posted, where the ground off the battery is mounted the long rear engine mount bolt.   What's proper/better?
Logged

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,289
Re: Where does this Wire Go cb750K5
« Reply #4 on: November 15, 2013, 08:19:37 AM »
I'd opt for one (out of the elements) under your seat at the tool tray.
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

DH

  • Guest
Re: Where does this Wire Go cb750K5
« Reply #5 on: November 15, 2013, 10:35:01 AM »
Mine is in the stock location. All I'll say is that there is more contact
area for the cable end on the frame, along with a bigger bolt providing
more clamping force. I've read that some locate the ground cable in
between the inside of the frame and the engine case itself. Never tried that tho, just put mine back to original.
Logged
Pages: [1]   Go Up
« previous next »