« previous next »
Pages: 1 ... 5 6 [7] 8 9 ... 20   Go Down

Author Topic: CB 750 K1 GT New Pics with a new look  (Read 125641 times)

0 Members and 2 Guests are viewing this topic.

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,385
  • Central Texas
Re: Tweakin's Turd (K1)... Paint Done
« Reply #150 on: January 01, 2014, 01:13:51 PM »
Quote from: MoMo on January 01, 2014, 12:50:03 PM
Quote from: Stev-o on January 01, 2014, 12:05:14 PM
"Top Notch Tweakin", sounds like you have a new name?


you mean TNT?   ...Larry

Yes, exactly!  But hope he doesnt blow up that 836...
Logged
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline RAFster122s

  • I feel like a really really
  • Really Old Timer ...
  • *******
  • Posts: 12,415
  • SOHC4 member # 2605
Re: Tweakin's Turd (K1)... Paint Done
« Reply #151 on: January 01, 2014, 01:18:37 PM »
Quote from: Retro Rocket on December 31, 2013, 07:37:26 PM
Quote from: RAFster122S on December 31, 2013, 06:54:14 PM
The black oxide...keep lightly oiled, as you know, they rust easy otherwise and are a pita to clean up.  Wonder if silicone would protect them from rusting but keep the dirt buildup to a minimum?

Who did your head work? Mike R?
Was the head ported at all? I presume with the nice upgrades to top shelf merchandise you had some work done on the head to eek out more performance...

David

Be very careful using silicone on the black oxide, most silicone is acidic and will promote rust, there are non acidic versions that would work, ever see all the dodgy  leaky windscreens "fixed up" with silicone.? most just about fell out due to rust not long after... ;)

RR, thanks!  I didn't know that...

David
Logged
David- back in the desert SW!

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,068
  • I refuse...
Re: Tweakin's Turd (K1)... Paint Done
« Reply #152 on: January 01, 2014, 02:25:35 PM »
Tweakin - you can find the 12 PT in metric SS at Allensfastners.com. I've got them lined up for my new build also.

*Thought I was going to be "special" and use them, but your progress beat me to it.
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline SF

  • Hot Shot
  • ***
  • Posts: 527
  • I burn gas very well
Re: Tweakin's Turd (K1)... Paint Done
« Reply #153 on: January 01, 2014, 03:29:00 PM »
Quote from: RAFster122S on January 01, 2014, 01:18:37 PM
Quote from: Retro Rocket on December 31, 2013, 07:37:26 PM
Quote from: RAFster122S on December 31, 2013, 06:54:14 PM
The black oxide...keep lightly oiled, as you know, they rust easy otherwise and are a pita to clean up.  Wonder if silicone would protect them from rusting but keep the dirt buildup to a minimum?

Who did your head work? Mike R?
Was the head ported at all? I presume with the nice upgrades to top shelf merchandise you had some work done on the head to eek out more performance...

David

Be very careful using silicone on the black oxide, most silicone is acidic and will promote rust, there are non acidic versions that would work, ever see all the dodgy  leaky windscreens "fixed up" with silicone.? most just about fell out due to rust not long after... ;)

RR, thanks!  I didn't know that...

David
If the local Home Depot employees don't know what your looking for try the local glazers(window installers) suppliers and ask for the low acid silicone.
Logged
92 wr250 sold
98 zx6r sold
04 zx10r
73 cb350 twin
75 cb550f
75 cb550f
72 r5c
rgid springer bobber project

Offline tweakin

  • tear down
  • Master
  • *****
  • Posts: 1,955
Re: Tweakin's Turd (K1)... Paint Done
« Reply #154 on: January 02, 2014, 06:52:13 AM »
TNT, you guys are hilarious, love it!

Stev-o I will blow up the 915 way before I grenade the 836.  ;D
Quote from: Stev-o on January 01, 2014, 01:13:51 PM
Quote from: MoMo on January 01, 2014, 12:50:03 PM
Quote from: Stev-o on January 01, 2014, 12:05:14 PM
"Top Notch Tweakin", sounds like you have a new name?


you mean TNT?   ...Larry

Yes, exactly!  But hope he doesnt blow up that 836...
Logged

Offline Kemp

  • Hot Shot
  • ***
  • Posts: 261
Re: Tweakin's Turd (K1)... Paint Done
« Reply #155 on: January 02, 2014, 08:55:49 AM »
Beautiful and meticulous work! By the way, what is an Elan kit for the 750 oil pump?
Logged

Offline tweakin

  • tear down
  • Master
  • *****
  • Posts: 1,955
Re: Tweakin's Turd (K1)... Paint Done
« Reply #156 on: January 02, 2014, 09:07:31 AM »
Quote from: Kemp on January 02, 2014, 08:55:49 AM
Beautiful and meticulous work! By the way, what is an Elan kit for the 750 oil pump?
Its the oil stopper that member Elan developed.  http://forums.sohc4.net/index.php?topic=126362.0
Logged

Offline tweakin

  • tear down
  • Master
  • *****
  • Posts: 1,955
Re: Tweakin's Turd (K1)... Paint Done
« Reply #157 on: January 04, 2014, 08:58:04 AM »
Small details are what i like about rebuilding these old bikes.  Picked up a Nissin master to run the dual discs.  Removed the big reservoir and added this little one in its place.  I run this set up on my 915 and it really helps to clean up the bars.

Original


New set up


Logged

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,068
  • I refuse...
Re: Tweakin's Turd (K1)... Paint Done
« Reply #158 on: January 04, 2014, 12:26:29 PM »
Check out a Rizoma MC cap. That will bring the details up to par with your build... Maybe their recessed fuel cap too.
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline tweakin

  • tear down
  • Master
  • *****
  • Posts: 1,955
Re: Tweakin's Turd (K1)... Paint Done
« Reply #159 on: January 04, 2014, 12:41:21 PM »
I do like the Rizoma parts, have quite a bit on my modern bike, but don't feel it fits the look I am going for with this build.
Quote from: calj737 on January 04, 2014, 12:26:29 PM
Check out a Rizoma MC cap. That will bring the details up to par with your build... Maybe their recessed fuel cap too.
Logged

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: Tweakin's Turd (K1)... Paint Done
« Reply #160 on: January 04, 2014, 02:34:00 PM »
Any info on where you picked up the MC and new reservoir, what bike they are off, aftermarket....?  Looks great...  ;)
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,385
  • Central Texas
Re: Tweakin's Turd (K1)... Paint Done
« Reply #161 on: January 04, 2014, 02:39:18 PM »
Nice mod on that MC...
Logged
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: Tweakin's Turd (K1)... Paint Done
« Reply #162 on: January 04, 2014, 02:50:27 PM »
Quote from: Stev-o on January 04, 2014, 02:39:18 PM
Nice mod on that MC...

Very tidy set up.... ;)
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline tweakin

  • tear down
  • Master
  • *****
  • Posts: 1,955
Re: Tweakin's Turd (K1)... Paint Done
« Reply #163 on: January 04, 2014, 03:39:44 PM »
Logged

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: Tweakin's Turd (K1)... Paint Done
« Reply #164 on: January 05, 2014, 03:16:13 PM »
Thanks for the links... ;)
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline tweakin

  • tear down
  • Master
  • *****
  • Posts: 1,955
Re: Tweakin's Turd (K1)... Paint Done
« Reply #165 on: January 19, 2014, 08:14:52 AM »
Time to finish the engine build.

Logged

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,568
  • Big ideas....
Re: Tweakin's Turd (K1)
« Reply #166 on: January 19, 2014, 09:17:58 AM »
You have entirely to much spare time on your hands brother. ;) ;) ;D ;D ;D ;D ;D ;D ;D ;D ;D
Logged
Owner of the "Million Dollar CB"

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,385
  • Central Texas
Re: Tweakin's Turd (K1)
« Reply #167 on: January 19, 2014, 12:00:14 PM »
Quote from: tweakin on January 19, 2014, 08:14:52 AM
Time to finish the engine build.



That is incredibly beautiful!
Logged
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline tweakin

  • tear down
  • Master
  • *****
  • Posts: 1,955
Re: Tweakin's Turd (K1)
« Reply #168 on: January 19, 2014, 01:45:13 PM »
Quote from: MRieck on January 19, 2014, 09:17:58 AM
You have entirely to much spare time on your hands brother. ;) ;) ;D ;D ;D ;D ;D ;D ;D ;D ;D
Not really too much spare time, just young kids who drive me to the shop for ME time, ;)
Logged

Offline tweakin

  • tear down
  • Master
  • *****
  • Posts: 1,955
Re: Tweakin's Turd (K1)
« Reply #169 on: January 20, 2014, 03:59:05 PM »
Thanks Stev-o.  There is something about new pistons and a fresh bore. ;D
Quote from: Stev-o on January 19, 2014, 12:00:14 PM
Quote from: tweakin on January 19, 2014, 08:14:52 AM
Time to finish the engine build.



That is incredibly beautiful!
Logged

Offline tweakin

  • tear down
  • Master
  • *****
  • Posts: 1,955
Re: Tweakin's Turd (K1)
« Reply #170 on: January 20, 2014, 04:07:34 PM »
Finally getting to the point where the fun begins.  Today I got the jugs and head on, I am so happy we can now get MLS gaskets for these bikes.  Torqued the head nuts, will let it sit overnight and re-torque before I instal the cam and cam towers.  Really looking forward to degreeing the cam, its satisfying then you know its just right.



Also got back my first batch of powdercoat, after 8 weeks... :o  My guy is half the price of most local powdercoaters but you need to ride his a$$ at times to get your parts done.  Needless to say, I grabbed all the parts that are going to be silver and dropped them off with my other powdercoater.

Love a frame in fresh powder.

Logged

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,733
  • SOHC/4 Member #1235
Re: Tweakin's Turd (K1)
« Reply #171 on: January 20, 2014, 04:44:31 PM »
8 Weeks!!!!  That'll teach me not to complain about 2 weeks. 
Looking amazing as ever.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline YogiBear

  • Hot Shot
  • ***
  • Posts: 272
Re: Tweakin's Turd (K1)
« Reply #172 on: January 20, 2014, 05:15:27 PM »
The engine looks great.
Logged

1974 Honda CB750K4        1973 Honda CB500 Four

Offline nvr2old

  • Hot Shot
  • ***
  • Posts: 484
Re: Tweakin's Turd (K1)
« Reply #173 on: January 20, 2014, 06:06:44 PM »
8 weeks is too long to make anyone wait..doesn't matter how well it's done or for how little it cost.  You're a patient man, tweakin..I'd be pi$$ed.  The frame does look great, though, as does the motor work.
Logged
'76 CB550F-'72 XL250-'82 MB5-'82 CX500 Turbo-'77 naked Goldwing-'75 CB400F cafe'-'79 Suzuki GS1000S..hey, it's a Wes Cooley..

Offline edwardmorris

  • Youngish
  • Old Timer
  • ******
  • Posts: 3,142
  • Do not cause harm, nor respond to harm with harm.
Re: Tweakin's Turd (K1)
« Reply #174 on: January 20, 2014, 07:27:14 PM »
Sweet looking engine tweakin, haven't read through all the pages but did you go oversize on the pistons? I'm pondering going oversize myself, but not sure where to get a good set, (IFF I find a local mahine shop that will do the work that is...). Mind sharing where you got yours and what size?
Logged
Pages: 1 ... 5 6 [7] 8 9 ... 20   Go Up
« previous next »