Author Topic: Seat vinyl softener (update)  (Read 8016 times)

0 Members and 1 Guest are viewing this topic.

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 20,350
  • Saver of unloved motorcycles.
Seat vinyl softener (update)
« on: November 17, 2013, 03:58:37 PM »
 I spotted this on the sandcast site and tried it. So far it's great.

 Avon skin so soft, right out of the bottle, rubbed in to the seat. I put it on the sandcast's seat, after a few days it feels smoother, softer and looks great. Today it was in the sun and felt like new. I can push on it and it dents in around my finger before the whole square pushed in.
 It might fall to pieces tomorrow but today it's like new. Not slippery like some treatments. It takes a few days to soak in. Your results may vary. My hands are soft too.
 Now if I could air up the foam it'd be in fine shape!
« Last Edit: May 22, 2014, 11:15:29 AM by Don R »
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 20,350
  • Saver of unloved motorcycles.
Re: Seat vinyl softener
« Reply #1 on: November 17, 2013, 08:15:13 PM »
 No mosquitos either!
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline brewsky

  • Expert
  • ****
  • Posts: 1,110
Re: Seat vinyl softener
« Reply #2 on: November 18, 2013, 02:11:10 AM »
Hmmmmm..... wonder how it does on 40+ year old original tires?
66 CA77
78 550K
78 CB750K
02 FZ1
09 GL 1800

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 20,350
  • Saver of unloved motorcycles.
Re: Seat vinyl softener
« Reply #3 on: November 18, 2013, 06:00:34 AM »
I'd bet they will look great, not sure I'd want to ride on them though. The 44 year old tire on my sandcast has split near the bead.
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 20,350
  • Saver of unloved motorcycles.
Re: Seat vinyl softener
« Reply #4 on: May 22, 2014, 11:15:05 AM »
Update, the seat is still soft, no splits no rot and looks good too. I applied a little more this week and wiped it down.
I tried it on the 1969 tool bag, it was so hard I was afraid it would crack, after an application and a soak in the sun it's as soft and flexible as new. I put some on a newer thinner tool bag, it got so soft I thought I had ruined it but after a day or two it's looking good again.
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline MoMo

  • Really Old Timer ...
  • *******
  • Posts: 8,271
  • Ride like you're invisible
Re: Seat vinyl softener (update)
« Reply #5 on: May 22, 2014, 02:05:08 PM »
Thanks for the update info Don,  hope all is well with you...Larry

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 20,350
  • Saver of unloved motorcycles.
Re: Seat vinyl softener (update)
« Reply #6 on: May 22, 2014, 02:11:07 PM »
 All is well Larry, same for you? I'm getting the shop ready to build a couple drag cars. One or two Alcohol  funny cars and maybe a dragster.
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline MoMo

  • Really Old Timer ...
  • *******
  • Posts: 8,271
  • Ride like you're invisible
Re: Seat vinyl softener (update)
« Reply #7 on: May 22, 2014, 04:28:00 PM »
All is well, however I have not touched a motorcycle(other than to ride the PC) since late fall.  Got a bit burned out and decided to get as much of the house done as I am capable of...Larry

Offline billingstitan

  • Enthusiast
  • **
  • Posts: 241
Re: Seat vinyl softener (update)
« Reply #8 on: May 22, 2014, 07:52:57 PM »
So is that the regular hand lotion, bug repellent, bath oil, or what?  :-\ I've got a couple seats and tool pouches that could use it - but went to search and there were about a zillion different versions - thanks for the tip!
Calling upon my years of experience, I froze at the controls.  ~Stirling Moss

2014 Ducati Monster 796
1977 CB550K http://forums.sohc4.net/index.php?topic=138289.0
1977 CB550K
1972 CL175
2000 Kaw Nomad 1500
1992 KDX 200
2001 Honda 80R
Past Bikes:
1973 Kaw 900Z1
1970 Yamaha 350RD
2003 Yamaha VStar 1100
2001 Suzuki GS850

ken65

  • Guest
Re: Seat vinyl softener (update)
« Reply #9 on: May 23, 2014, 02:57:33 AM »
thanks for starting this thread don, my wife just happens to sells the stuff as a hobby, im having a look at it now, cheers ken

Offline bjatwood

  • I never claimed to be an
  • Expert
  • ****
  • Posts: 976
  • 1973 CB750-K3
    • Minbikers Proboards
Re: Seat vinyl softener (update)
« Reply #10 on: May 23, 2014, 07:54:08 AM »
Going to have to give that stuff a try!
Brian
#24193

I believe that the Finest things are the most thoughtfully made, not the most expensive!
http://minibikers.proboards.com/

Offline Duanob

  • Bold Timer
  • Old Timer
  • ******
  • Posts: 4,011
  • Gotcha!
Re: Seat vinyl softener (update)
« Reply #11 on: May 23, 2014, 09:45:35 AM »
thanks for starting this thread don, my wife just happens to sells the stuff as a hobby, im having a look at it now, cheers ken

She might just have a whole new market! Who knew.  ;D
"Just because you flush a boatload of money down the toilet, doesn't make the toilet worth more",  My Stepfather the Unknown Poet

1974 CB360T
1976 CB550K2 Resurrected
1976 CB550F2 Barn Find
1979 CX500 VG "HONDA-GUZZI"
2007 Moto Guzzi Breva 750ie
2015 BMW F700GS
Another 1976 CB550K Cafe?

  __o
_- \_<,
(*) /' (*)

Offline grcamna2

  • Not a
  • Really Old Timer ...
  • *******
  • Posts: 15,306
  • I love to restore & travel. Keep'em Going Strong !
Re: Seat vinyl softener (update)
« Reply #12 on: May 23, 2014, 10:20:32 AM »
So is that the regular hand lotion, bug repellent, bath oil, or what?  :-\ I've got a couple seats and tool pouches that could use it - but went to search and there were about a zillion different versions - thanks for the tip!

Yeah, I'd like to know too;what version of the Avon is it ? I'll just go to my local store and ask, "I'd like the 'tried and true' stuff recommended by Don R Please"  :)
75' CB400F/'bunch o' parts' & 81' CB125S modded to a 'CB200S'
  I love the small ones too !
Do your BEST...nobody can take that away from you.

Offline MoMo

  • Really Old Timer ...
  • *******
  • Posts: 8,271
  • Ride like you're invisible
Re: Seat vinyl softener (update)
« Reply #13 on: May 23, 2014, 02:23:00 PM »
Has to be the Avon Tire Softener available in the piston shaped bottle

Offline grcamna2

  • Not a
  • Really Old Timer ...
  • *******
  • Posts: 15,306
  • I love to restore & travel. Keep'em Going Strong !
Re: Seat vinyl softener (update)
« Reply #14 on: May 23, 2014, 02:27:30 PM »
Lol  ;D
75' CB400F/'bunch o' parts' & 81' CB125S modded to a 'CB200S'
  I love the small ones too !
Do your BEST...nobody can take that away from you.

Offline HondaMan

  • Someone took this pic of me before I became a
  • Really Old Timer ...
  • *******
  • Posts: 14,139
  • ...not my choice, I was nicknamed...
    • Getting 'em Back on the Road
Re: Seat vinyl softener (update)
« Reply #15 on: May 23, 2014, 05:16:02 PM »
Dang...we finally just got rid of that Avon lady, too...
See SOHC4shop@gmail.com for info about the gadgets I make for these bikes.

The demons are repulsed when a man does good. Use that.
Blood is thicker than water, but motor oil is thicker yet...so, don't mess with my SOHC4, or I might have to hurt you.
Hondaman's creed: "Bikers are family. Treat them accordingly."

Link to Hondaman Ignition: http://forums.sohc4.net/index.php?topic=67543.0

Link to My CB750 Book: https://www.lulu.com/search?adult_audience_rating=00&page=1&pageSize=10&q=my+cb750+book

Link to website: www.SOHC4shop.com

DH

  • Guest
Re: Seat vinyl softener (update)
« Reply #16 on: May 23, 2014, 06:21:05 PM »
Re package and sell it on E bay.......Sandcast seat conditioner/restorer.
6oz. bottle only 19.95...... ;)

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 20,350
  • Saver of unloved motorcycles.
Re: Seat vinyl softener (update)
« Reply #17 on: May 23, 2014, 10:03:54 PM »
Heck, I didn't know there were multiple versions of it, it's the bath oil, I found it in the linen closet. I asked my wife and she thought there was just the one product.
 I know it repels mosquitos and it softened that rough spot on my elbow. LOL!
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

ken65

  • Guest
Re: Seat vinyl softener (update)
« Reply #18 on: May 23, 2014, 10:22:45 PM »
bit of a test, worked good on the seat, even better on some black plastic . a fair bit cheaper than armour oil..
 this is what i used.

Offline grcamna2

  • Not a
  • Really Old Timer ...
  • *******
  • Posts: 15,306
  • I love to restore & travel. Keep'em Going Strong !
Re: Seat vinyl softener (update)
« Reply #19 on: May 24, 2014, 06:34:26 AM »
Body lotion,not hand lotion? ok,the pink stuff  got it
75' CB400F/'bunch o' parts' & 81' CB125S modded to a 'CB200S'
  I love the small ones too !
Do your BEST...nobody can take that away from you.

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 20,350
  • Saver of unloved motorcycles.
Re: Seat vinyl softener (update)
« Reply #20 on: May 24, 2014, 09:29:48 AM »
And I don't slide off the seat.
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline grcamna2

  • Not a
  • Really Old Timer ...
  • *******
  • Posts: 15,306
  • I love to restore & travel. Keep'em Going Strong !
Re: Seat vinyl softener (update)
« Reply #21 on: May 24, 2014, 10:00:07 AM »
I guess I'd have to find an Avon rep. to get it, OK
75' CB400F/'bunch o' parts' & 81' CB125S modded to a 'CB200S'
  I love the small ones too !
Do your BEST...nobody can take that away from you.

Offline HondaMan

  • Someone took this pic of me before I became a
  • Really Old Timer ...
  • *******
  • Posts: 14,139
  • ...not my choice, I was nicknamed...
    • Getting 'em Back on the Road
Re: Seat vinyl softener (update)
« Reply #22 on: May 24, 2014, 10:37:17 AM »
If I use too much, will it also soften my butt?
--just wonder...  ;D
See SOHC4shop@gmail.com for info about the gadgets I make for these bikes.

The demons are repulsed when a man does good. Use that.
Blood is thicker than water, but motor oil is thicker yet...so, don't mess with my SOHC4, or I might have to hurt you.
Hondaman's creed: "Bikers are family. Treat them accordingly."

Link to Hondaman Ignition: http://forums.sohc4.net/index.php?topic=67543.0

Link to My CB750 Book: https://www.lulu.com/search?adult_audience_rating=00&page=1&pageSize=10&q=my+cb750+book

Link to website: www.SOHC4shop.com

Offline grcamna2

  • Not a
  • Really Old Timer ...
  • *******
  • Posts: 15,306
  • I love to restore & travel. Keep'em Going Strong !
Re: Seat vinyl softener (update)
« Reply #23 on: May 24, 2014, 12:57:06 PM »
You don't have to worry about becoming a 'hard a#s' Mark,you never sit down long enough  :o  ;D No offense intended  :-X
75' CB400F/'bunch o' parts' & 81' CB125S modded to a 'CB200S'
  I love the small ones too !
Do your BEST...nobody can take that away from you.

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 20,350
  • Saver of unloved motorcycles.
Re: Seat vinyl softener (update)
« Reply #24 on: December 09, 2014, 09:52:59 PM »
 Update, all seats I've used it on still look good, including the sandcast bike. The one 400 seat was already toast so I bought a cover for it. My chassis shop partner was here working on a funny car and he asked if I was wearing some new cheap ass cologne. I realized he was smelling the skin so soft I had put on the Yamaha 850 seat. Smells way better than dog poop on the lawn tractor tire though.
 I'm using the bath oil and it's not pink.
« Last Edit: December 09, 2014, 09:55:30 PM by Don R »
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline HondaMan

  • Someone took this pic of me before I became a
  • Really Old Timer ...
  • *******
  • Posts: 14,139
  • ...not my choice, I was nicknamed...
    • Getting 'em Back on the Road
Re: Seat vinyl softener (update)
« Reply #25 on: December 09, 2014, 10:35:40 PM »
You don't have to worry about becoming a 'hard a#s' Mark,you never sit down long enough  :o  ;D No offense intended  :-X
You may be right!
:)
See SOHC4shop@gmail.com for info about the gadgets I make for these bikes.

The demons are repulsed when a man does good. Use that.
Blood is thicker than water, but motor oil is thicker yet...so, don't mess with my SOHC4, or I might have to hurt you.
Hondaman's creed: "Bikers are family. Treat them accordingly."

Link to Hondaman Ignition: http://forums.sohc4.net/index.php?topic=67543.0

Link to My CB750 Book: https://www.lulu.com/search?adult_audience_rating=00&page=1&pageSize=10&q=my+cb750+book

Link to website: www.SOHC4shop.com

Offline HondaMan

  • Someone took this pic of me before I became a
  • Really Old Timer ...
  • *******
  • Posts: 14,139
  • ...not my choice, I was nicknamed...
    • Getting 'em Back on the Road
Re: Seat vinyl softener (update)
« Reply #26 on: December 09, 2014, 10:36:37 PM »
Update, all seats I've used it on still look good, including the sandcast bike. The one 400 seat was already toast so I bought a cover for it. My chassis shop partner was here working on a funny car and he asked if I was wearing some new cheap ass cologne. I realized he was smelling the skin so soft I had put on the Yamaha 850 seat. Smells way better than dog poop on the lawn tractor tire though.
 I'm using the bath oil and it's not pink.

I was about to try this on the 750F seat. Does the [stench] go away after a while?
See SOHC4shop@gmail.com for info about the gadgets I make for these bikes.

The demons are repulsed when a man does good. Use that.
Blood is thicker than water, but motor oil is thicker yet...so, don't mess with my SOHC4, or I might have to hurt you.
Hondaman's creed: "Bikers are family. Treat them accordingly."

Link to Hondaman Ignition: http://forums.sohc4.net/index.php?topic=67543.0

Link to My CB750 Book: https://www.lulu.com/search?adult_audience_rating=00&page=1&pageSize=10&q=my+cb750+book

Link to website: www.SOHC4shop.com

Offline grcamna2

  • Not a
  • Really Old Timer ...
  • *******
  • Posts: 15,306
  • I love to restore & travel. Keep'em Going Strong !
Re: Seat vinyl softener (update)
« Reply #27 on: December 10, 2014, 05:24:40 AM »
How often do you need to re-apply it Don R ?
 I put it on my cycle seat that I use the most and it's still very supple,even in the cold;it's that blue Sargent cover that I got when I bought a used seat & those Sargent blue seatcovers stay good for a while anyway.I think next I'll put it on an old severely weathered oem seatcover to see if it'll take away the 'white' from it  ???
75' CB400F/'bunch o' parts' & 81' CB125S modded to a 'CB200S'
  I love the small ones too !
Do your BEST...nobody can take that away from you.

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 20,350
  • Saver of unloved motorcycles.
Re: Seat vinyl softener (update)
« Reply #28 on: December 11, 2014, 07:49:40 AM »
Yes the smell does dissipate, We were working on a funny car chassis and my welder kept giving me the stink eye, he finally asked, are you wearing some nasty cologne or something?  HA! No it's just the stuff I put on the yamaha seat.
 I've applied it to the sandfcast's seat 3 times maybe. I don't think it needs any more, it feels like new and no cracks so far. I've used it on a couple more bikes since, it seems to dry in the seam areas first so I reapplied it there.
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline Harsh

  • Expert
  • ****
  • Posts: 1,103
  • 74 CB750 and two 72 CB350's
Re: Seat vinyl softener (update)
« Reply #29 on: December 12, 2014, 02:57:16 AM »
Don...Is this the stuff you are using?


Offline Restoration Fan

  • My wife will never call me
  • Master
  • *****
  • Posts: 1,956
Re: Seat vinyl softener (update)
« Reply #30 on: December 12, 2014, 03:14:56 AM »
That's it, Harsh. 

Just found this thread but my brother-in-law and I have been using it on our saddles for more than 10 years.  It actually seems to work better than the expensive leather conditioner does on leather so I would expect it would do the same for vinyl.  And whoever posted that about mosquitos is right.  If you are willing to smell like a French cathouse, put that stuff on you if you're going to be in a wet area that has a lot of mosquitos and you can walk through them with impunity.  They won't mess with you at all.
Ron

Stella - Logan's Senior Project    78 750K http://forums.sohc4.net/index.php?topic=141761.0

Logan's Reward - CB500 and CB550 Cafes    http://forums.sohc4.net/index.php/topic,147787.0.html