« previous next »
Pages: [1]   Go Down

Author Topic: Cb350f float pin size  (Read 1518 times)

0 Members and 1 Guest are viewing this topic.

Offline skidooextreme

  • Enthusiast
  • **
  • Posts: 130
Cb350f float pin size
« on: November 09, 2013, 09:06:36 AM »
Could not find it anywhere.  Anyone have the size, or good replacement recommendations?

Sent from my Transformer TF101 using Tapatalk

Logged

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,289
Re: Cb350f float pin size
« Reply #1 on: November 09, 2013, 09:36:53 AM »
Brass hobby tubing.  Any hobby or RC shop.  Might run you $3.
Cut longer than the width of the posts, and slightly pinch the ends so it doesn't work itself out.
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline crazypj

  • I'm brill, me
  • Old Timer
  • ******
  • Posts: 4,468
  • first 100,000 miles. 1977 CB550F
Re: Cb350f float pin size
« Reply #2 on: November 09, 2013, 10:14:55 AM »
either 0.100" or 2.5mm, depending how worn the holes are
Either will fit through float pivot
Logged
I fake being smart pretty good
'you can take my word for it or argue until you find out I'm right'

Offline harisuluv

  • Master
  • *****
  • Posts: 2,009
Re: Cb350f float pin size
« Reply #3 on: November 09, 2013, 12:21:06 PM »
2.0 mm.
Logged

Offline Trevor from Warragul

  • Expert
  • ****
  • Posts: 1,117
Re: Cb350f float pin size
« Reply #4 on: November 10, 2013, 01:04:24 AM »
How many do you need?  PM me your details & I'll send you some.

Cheers

Trevor
Logged
1971 Kawasaki H1A
1972 Honda CB350F
1976 Moto Morini 3 1/2 Sport
1978 Honda CBX
1997 Suzuki Bandit 1200
1999 Ducati Monster 750

Offline skidooextreme

  • Enthusiast
  • **
  • Posts: 130
Re: Cb350f float pin size
« Reply #5 on: November 10, 2013, 04:45:24 AM »
Thanks pm sent

Sent from my Transformer TF101 using Tapatalk

Logged

Offline skidooextreme

  • Enthusiast
  • **
  • Posts: 130
Re: Cb350f float pin size
« Reply #6 on: November 19, 2013, 10:17:57 AM »
Big thanks to morini for sending 4 float pins to me for free.  He lives in Australia and cost a few dollars for shipping, great guy!

Sent from my Galaxy Nexus using Tapatalk

Logged

Black 750K8

  • Guest
Re: Cb350f float pin size
« Reply #7 on: November 19, 2013, 11:02:45 AM »
In the future try a set of drills keep trying until you get a snug fit and use that to determine size. Same thing for cotter pins on your brakes and axle. You always need a big set of drills.
Logged
Pages: [1]   Go Up
« previous next »