Author Topic: 750 cafe/dunstall/rickman.  (Read 6979 times)

0 Members and 2 Guests are viewing this topic.

Offline mitchie

  • Full Member
  • *
  • Posts: 44
750 cafe/dunstall/rickman.
« on: November 22, 2013, 05:12:47 AM »
New to the site....
Decided to put together the big I rode when I was a kid with some new stuff that I had acquired.  It's a 71 with a bunch of older aftermarket stuff. Motor is bone stock but is fairly chromed out.  The fairing is a splash of a rickman... But requires a TON of trimming to fit with the clip-ons... Somebody over the years cut off the steering stops on the top mount ... So I'm gonna have hand trapping which will take some getting used to.  My goal is to keep the frame stock so it can always be put back together stock.  The old frame was cracked(inside rust)..  So the first thing I had to do was swap everything over.

I have a laundry list of stuff to do... (build mounts, paint, fab stuff)
But here is the so far...
This is the last time it was on the road.

Old frame

New frame.


And... Where i'm at now.




Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,290
  • Central Texas
Re: 750 cafe/dunstall/rickman.
« Reply #1 on: November 22, 2013, 05:28:47 AM »
Welcome from Texas.  Looks like a cool project, subscribed.

What car is that in your garage?
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline mitchie

  • Full Member
  • *
  • Posts: 44
Re: 750 cafe/dunstall/rickman.
« Reply #2 on: November 22, 2013, 06:23:29 AM »
Welcome from Texas.  Looks like a cool project, subscribed.

What car is that in your garage?


Thankyou...  I'll update as I go... It will move along quickly hopefully.

Offline brandEn

  • Old Timer
  • ******
  • Posts: 3,205
Re: 750 cafe/dunstall/rickman.
« Reply #3 on: November 22, 2013, 06:44:12 AM »
Looks like a cool project. Subscribed

Offline dummy

  • Full Member
  • *
  • Posts: 15
Re: 750 cafe/dunstall/rickman.
« Reply #4 on: November 22, 2013, 07:14:15 AM »
Pretty cool did you do your own fiberglass? I'm also interested in the Lotus in the back post a couple of that bad boy too.

Offline mitchie

  • Full Member
  • *
  • Posts: 44
Re: 750 cafe/dunstall/rickman.
« Reply #5 on: November 22, 2013, 08:38:46 AM »
Those glass pieces were pops made back in the 70's and never finished.  The fairing is not completely straight.. But I have almost nothing invested in them so Cutting them up does not hurt too much.  I am trying to do the project with what I have laying around and all older stuff to be kind of a period piece...  At one time I have yzf forks and 900RR brakes on it...  Now everyone is doing that stuff, lol...  So I'm trying to stay old school.
The lotus is my friends... Its an early Canadian kit with Toyota driveline.  It's a cool little driver.
I'll see if I can get a few more shots of it.


Offline mitchie

  • Full Member
  • *
  • Posts: 44
Re: 750 cafe/dunstall/rickman.
« Reply #6 on: November 22, 2013, 08:41:05 AM »

Offline dummy

  • Full Member
  • *
  • Posts: 15
Re: 750 cafe/dunstall/rickman.
« Reply #7 on: November 22, 2013, 06:52:52 PM »
Those things are like awesome go carts.  I'm surprised how well that glad has held up.  I'm trying to do the same with period style parts I did make an exception for cbr rear sets so I can convert the rear to disks and they were super cheap.

Offline Tews19

  • I am no
  • Really Old Timer ...
  • *******
  • Posts: 6,465
Re: 750 cafe/dunstall/rickman.
« Reply #8 on: November 22, 2013, 07:13:55 PM »
The fairing is killer. Like the raw look of the glass...
1969 Honda CB750... Basket case
1970 Honda CB750 survivor.

Offline mitchie

  • Full Member
  • *
  • Posts: 44
Re: 750 cafe/dunstall/rickman.
« Reply #9 on: November 23, 2013, 05:07:38 AM »
yah... I remember the day I bought the fairing.. It was covered in pigeon Sh!!.

The seat section is really bad... I'm gonna have to put a layer of matt on the bottom and some resin on the top side.. It dried out badly.

I put a thing in the classified section... I need later style forks because I lost the caliper mount and I want to run dual calipers... If anyone doing a resto is interested in a trade for my more rare early forks for later forks.. I'm totally game.  I

I got bummed out last night when I found a crack in the thin aluminum around the starter motor... I epoxied it.. But I was pissed.

I got the carbs and header on last night.

Offline honda_dog

  • Hot Shot
  • ***
  • Posts: 594
Re: 750 cafe/dunstall/rickman.
« Reply #10 on: November 23, 2013, 08:26:09 AM »
That's a nice project, I like the fairing, also. It's fun to watch guys do this stuff. I have to watch, because I have no patience or skills for all that custom work. Good luck with the rest of the project!
1978 CB750K
1981 CB900F
1978 Suzuki GS1000E
1981 Suzuki GS1100EX
1980 Suzuki GS1000S (Wes Cooley replica)
1982 Suzuki GS1000S Katana
1982 Suzuki GS1100EZ
1983 Suzuki GS1100ED
1983 Suzuki GS1100ESD
2014 Honda F6B Deluxe

Offline DustyRags

  • I'm not skilled, I'm just a
  • Hot Shot
  • ***
  • Posts: 720
  • Just try it and see what happens
Re: 750 cafe/dunstall/rickman.
« Reply #11 on: November 23, 2013, 09:02:45 AM »
Niiiiice, far too rare to see someone build a bike with a fairing on these old things!
1976 CB550K- sold
2005 Kawasaki Vulcan 500- sold
2000 CB750 Nighthawk - sold
1975 XL350 - crashed
2004 Suzuki Vstrom 650 - sold

Offline mitchie

  • Full Member
  • *
  • Posts: 44
Re: 750 cafe/dunstall/rickman.
« Reply #12 on: November 24, 2013, 09:10:18 AM »
I've been working like crazy....  Started wiring .. And running cables etc.   Here are some update pics.





Offline mitchie

  • Full Member
  • *
  • Posts: 44
Re: 750 cafe/dunstall/rickman.
« Reply #13 on: November 24, 2013, 09:11:50 AM »
More...


Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: 750 cafe/dunstall/rickman.
« Reply #14 on: November 24, 2013, 09:37:13 AM »
I like the street tracker style tail.
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline mitchie

  • Full Member
  • *
  • Posts: 44
Re: 750 cafe/dunstall/rickman.
« Reply #15 on: November 24, 2013, 09:49:21 AM »
I like the street tracker style tail.

Yah... Same here.. Its amazing how it works style wise.

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: 750 cafe/dunstall/rickman.
« Reply #16 on: November 24, 2013, 11:34:25 AM »
I like the street tracker style tail.

Yah... Same here.. Its amazing how it works style wise.
.
Yeah. It really works well with the Dunstall tank. Which body part is Rickman?
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline mitchie

  • Full Member
  • *
  • Posts: 44
Re: 750 cafe/dunstall/rickman.
« Reply #17 on: November 24, 2013, 11:37:30 AM »
I like the street tracker style tail.

Yah... Same here.. Its amazing how it works style wise.
.
Yeah. It really works well with the Dunstall tank. Which body part is Rickman?

The fairing is a rickman pop that I have cut up a lot.  The front fender that will go on it is a rickman.  I'm battling with the steering stop that has been cut off the mount at some point.  I'm trying to figure out an alternative to welding them back on.

Offline seanbarney41

  • not really that much younger than an
  • Really Old Timer ...
  • *******
  • Posts: 10,820
Re: 750 cafe/dunstall/rickman.
« Reply #18 on: November 24, 2013, 11:44:45 AM »
Is that gas tank fiberglass?  I am preparing a project with a Read Titan bodykit.  The tank looks quite similar to yours and is fiberglass.  I am very worried about what ethanol gas is gonna do this tank.  Of course, it will need to be lined...all I have found that claims to stick to fiberglass is Caswell's...but success reports are not as plentiful as I would hope...wondering what your plans are for this situation.
If it works good, it looks good...

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: 750 cafe/dunstall/rickman.
« Reply #19 on: November 24, 2013, 11:51:26 AM »
Is that gas tank fiberglass?  I am preparing a project with a Read Titan bodykit.  The tank looks quite similar to yours and is fiberglass.  I am very worried about what ethanol gas is gonna do this tank.  Of course, it will need to be lined...all I have found that claims to stick to fiberglass is Caswell's...but success reports are not as plentiful as I would hope...wondering what your plans are for this situation.
I've had good reports with Caswell's but I've only used it with steel and not glass.
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline mitchie

  • Full Member
  • *
  • Posts: 44
Re: 750 cafe/dunstall/rickman.
« Reply #20 on: November 24, 2013, 11:56:25 AM »
When I used to ride it and did not no any better it would leak every year.  I just patched it with new glass.  I always though it was just because it was old.. Now I know better.  I'm gonna do the caswell thing and run ethanol free fuel... Ethanol is the work of the devil.  Up here in Canada.. Shell mid and hi test is all ethanol free.  Plus the tank is huge .. It used to take almost 20 bucks to fill it to the top... It was funny because reserve seem to last forever.. lol.

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: 750 cafe/dunstall/rickman.
« Reply #21 on: November 24, 2013, 12:12:13 PM »
When I used to ride it and did not no any better it would leak every year.  I just patched it with new glass.  I always though it was just because it was old.. Now I know better.  I'm gonna do the caswell thing and run ethanol free fuel... Ethanol is the work of the devil.  Up here in Canada.. Shell mid and hi test is all ethanol free.  Plus the tank is huge .. It used to take almost 20 bucks to fill it to the top... It was funny because reserve seem to last forever.. lol.
I wish our premium octane fuels were ethanol free. No such luck. I use seafoam when I let my bikes sit for any long time.
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline mitchie

  • Full Member
  • *
  • Posts: 44
Re: 750 cafe/dunstall/rickman.
« Reply #22 on: November 25, 2013, 07:19:19 AM »
....  Ethanol should be outlawed.  Motors run on dinosoars not corn.

Now I'm running into the classic throttle return cable is somehow binding.  Works fine with just the pull... Install the push and the thing sticks wide open.

Offline Rookster

  • Hot Shot
  • ***
  • Posts: 729
Re: 750 cafe/dunstall/rickman.
« Reply #23 on: November 25, 2013, 08:34:33 AM »
Ethanol free gas and a liner are a must.  I have used Hirsch sealer in my fiberglass tank.  It works good and can be recoated without having to remove the old liner.  I had tried KBS but it failed very quickly.  Any plans for the old Dunstall seat?

Scott

Offline mitchie

  • Full Member
  • *
  • Posts: 44
Re: 750 cafe/dunstall/rickman.
« Reply #24 on: November 25, 2013, 08:44:35 AM »
Yup... I have the wiring set up to switch back and forth when wifey wants to go for a ride.

It needs work too though... lol..  The list feels endless..

I am working like a freak trying to get it done by mid - January.. I have acl reconstruction then that will keep me out of the garage for a long while. 

This throttle cable thing is driving me nuts.

carbs snap back perfect when opened manually.

carbs snap back perfect with just the pull cable on

both cables are free as can be.  lubed etc.

Hook up push cable and it sticks like nobodies business..   

I ordered new cables anyways....