Author Topic: Where can you still buy a clutch lifter plate?  (Read 2990 times)

0 Members and 1 Guest are viewing this topic.

Offline leesfer

  • Noob, learning as I go
  • Enthusiast
  • **
  • Posts: 106
Where can you still buy a clutch lifter plate?
« on: December 02, 2013, 03:53:05 pm »
I just snapped my clutch lifter plate so I am looking for a new one but every single vendor seems to not have them anymore.

Do you guys know where you can still find them?

This is for a 1975 CB750
1975 CB750

Offline 74750k4

  • Hot Shot
  • ***
  • Posts: 459
Re: Where can you still buy a clutch lifter plate?
« Reply #1 on: December 02, 2013, 03:57:39 pm »
A new one? That might be a difficult task. But Ebay, for used. You might have to pony up for a complete basket.

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,221
  • Central Texas
Re: Where can you still buy a clutch lifter plate?
« Reply #2 on: December 02, 2013, 06:14:20 pm »
 I should have a good used one.
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline mec

  • Hot Shot
  • ***
  • Posts: 503
Re: Where can you still buy a clutch lifter plate?
« Reply #3 on: December 02, 2013, 10:36:03 pm »
repairable

mec
Honda Monkey
Takeuchi TB 070
Massey Ferguson

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,902
  • Bought her new 4/75
Re: Where can you still buy a clutch lifter plate?
« Reply #4 on: December 02, 2013, 10:40:38 pm »
EBay, our members, Bill Benton. Not available from Honda, used are fine and cheaper too.

Mec, what are you up to now??!! It's been kinda boring around here without your amazing projects!
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline martin99

  • UK Based, Non-
  • Master
  • *****
  • Posts: 1,733
  • Adventure before Dementia
Re: Where can you still buy a clutch lifter plate?
« Reply #5 on: December 03, 2013, 01:00:49 am »
Dave Silver is showing them in stock, around 63 USD.
Build threads:
77 750F2 Refresh Project http://forums.sohc4.net/index.php?topic=144075.0
TRIBSA http://forums.sohc4.net/index.php/topic,160296.0.html

1977 CB750 F2
1958 Norton Model 99
2011 Triumph Street Triple 675

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: Where can you still buy a clutch lifter plate?
« Reply #6 on: December 03, 2013, 06:40:01 am »
I just snapped my clutch lifter plate so I am looking for a new one but every single vendor seems to not have them anymore.

Do you guys know where you can still find them?

This is for a 1975 CB750
MEC (smarter than me by a group) says can be repaired. I would think so but I've never seen it. Used sources like eBay best bet, still pricey.

Begs the question, do you understand why it broke? There are only 2 ways out of 4 that it can go. 50/50 chance of getting it right or breaking it.  MANY threads on this problem.
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline leesfer

  • Noob, learning as I go
  • Enthusiast
  • **
  • Posts: 106
Re: Where can you still buy a clutch lifter plate?
« Reply #7 on: December 03, 2013, 08:23:36 am »

Begs the question, do you understand why it broke? There are only 2 ways out of 4 that it can go. 50/50 chance of getting it right or breaking it.  MANY threads on this problem.

I've found that out after it broke and searching for an answer, second time around I will be sure to feel out if it's right before tightening it down
1975 CB750

Offline dlhoulton

  • Enthusiast
  • **
  • Posts: 177
Re: Where can you still buy a clutch lifter plate?
« Reply #8 on: December 03, 2013, 03:59:02 pm »

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,221
  • Central Texas
Re: Where can you still buy a clutch lifter plate?
« Reply #9 on: December 03, 2013, 04:07:17 pm »
I  have a good used one....cheap
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline CB750R

  • Hot Shot
  • ***
  • Posts: 609
  • 77 CB750F
Re: Where can you still buy a clutch lifter plate?
« Reply #10 on: December 04, 2013, 08:11:04 am »
Is that the plate the four clutch springs go through?  I've broken two! Installing stiffer clutch springs and over tightening I guess it happened so dam easy!

Offline DanJ

  • Enthusiast
  • **
  • Posts: 142
Re: Where can you still buy a clutch lifter plate?
« Reply #11 on: December 04, 2013, 08:41:25 am »
I  have a good used one....cheap
If Leesfer doesn't take it I will, I broke mine screwing around with it

Offline bjbuchanan

  • Master
  • *****
  • Posts: 2,276
Re: Where can you still buy a clutch lifter plate?
« Reply #12 on: December 04, 2013, 09:42:46 am »
I also have one if someone needs it for a 750. Pm me if interested
The dirty girl-1976 cb750k, Ebay 836, Tracy bodykit
Round top carbs w/ 38 pilots, middle needle position, airscrew 7/8ths out, 122 main jet
Stock airbox w/ drop in K&N, Hooker 4-1

Don't trust me alone with a claw hammer and some pliers

Offline Phoenix

  • Hot Shot
  • ***
  • Posts: 271
  • 4 wheels move the body. 2 wheels move the soul
Re: Where can you still buy a clutch lifter plate?
« Reply #13 on: December 04, 2013, 09:59:35 am »
I bought a used one from Rob at CyclcleRecycle in Indianapolis for about ten bucks.http://forums.sohc4.net/Smileys/default/smiley.gif
Ed Spengeman
Indy
1971 CB750K1 (Stock)
1973 CB350 Twin  (Gone)

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,526
  • Bike almost back to the 70's 2015
Re: Where can you still buy a clutch lifter plate?
« Reply #14 on: December 04, 2013, 10:31:16 am »
Tighten or untighten the 4 screws in small increments to avoid breaking it. 1/4 turn crosswise will take time but without damage.
I have seen new on many sites for not that much money. It costed not much less 30 years ago when I broke one.
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967