« previous next »
Pages: [1]   Go Down

Author Topic: Engle cam for 750  (Read 3460 times)

0 Members and 1 Guest are viewing this topic.

Offline ken736cc

  • When the cops pull me over, I usually let them off with just a warning.
  • Enthusiast
  • **
  • Posts: 175
Engle cam for 750
« on: November 20, 2013, 10:47:41 am »
I found this cam in a used motor. The brand is Engle. It has some marks stamped in. Can anyone supply specifications and opinions about this cam?   This motor also has Venola 836cc pistons.

Thanks
Logged
K0 sandcast(in process of restoration), K0 diecast, K0 cafe racer
BMW R69S daily rider, 71SL350, 71 SL100, 63 SS50

Offline Sam Green Racing

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: Engle cam for 750
« Reply #1 on: November 20, 2013, 03:45:55 pm »
Billy had one as well Ken in his cam sale the other week, I don't remember what letters were stamped on it though.

Sam. ;)
Logged
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline Sam Green Racing

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: Engle cam for 750
« Reply #2 on: November 20, 2013, 03:49:30 pm »
Found it, I forgot it was me who listed it.  ;D ;D ;D ;D ;D

#13.  Engle billet,  K 134 CWC D2 Engle  J  BR 21.

Sam. ;)
Logged
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Engle cam for 750
« Reply #3 on: November 20, 2013, 03:50:03 pm »
 Some of the RC also said Engle  check for end markings.
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline 77F

  • Full Member
  • *
  • Posts: 27
Re: Engle cam for 750
« Reply #4 on: November 20, 2013, 05:34:49 pm »
Ken736cc,
     
          I have an original Engle cam Flyer for the 750's I will try and post a picture of it ! Might take a bit not to good on computer lol.

Specs Engle DF-1

Lift IN. .340   DURATION 290 In.   Valve Lash  In. .002
      Ex. .340                   280  Ex.                     Ex. .004

Regards,

            Josh
Logged
77F 836cc Rider, 78F Tracy Body 836cc Needs Resto, Early Tracy bodied CB750K 1160cc Stroker with Webers, 78k Was rider Now parts Bike, 79&80 CB750F, 98 SuperHawk 07 Husqvarna Smr 510 83 CB1100F Turbo. CB1100f 1219cc big block turbo 86gpz1000r 86200x 85atc70
Gone.02  919, 96 CBR600F3, 85 XR200R

Offline 77F

  • Full Member
  • *
  • Posts: 27
Re: Engle cam for 750
« Reply #5 on: November 20, 2013, 05:47:27 pm »
Engle Cam Flyer
Logged
77F 836cc Rider, 78F Tracy Body 836cc Needs Resto, Early Tracy bodied CB750K 1160cc Stroker with Webers, 78k Was rider Now parts Bike, 79&80 CB750F, 98 SuperHawk 07 Husqvarna Smr 510 83 CB1100F Turbo. CB1100f 1219cc big block turbo 86gpz1000r 86200x 85atc70
Gone.02  919, 96 CBR600F3, 85 XR200R

Online scottly

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,164
  • Humboldt, AZ
Re: Engle cam for 750
« Reply #6 on: November 20, 2013, 05:48:11 pm »
Wow!! Josh, you hit a home run, and on only your 5th post! Welcome! ;D
Logged
Don't fix it if it ain't broke!
Helmets save brains. Always wear one and ride like everyone is trying to kill you....

Offline 77F

  • Full Member
  • *
  • Posts: 27
Re: Engle cam for 750
« Reply #7 on: November 20, 2013, 05:52:32 pm »
Engle Cam Flyer
Logged
77F 836cc Rider, 78F Tracy Body 836cc Needs Resto, Early Tracy bodied CB750K 1160cc Stroker with Webers, 78k Was rider Now parts Bike, 79&80 CB750F, 98 SuperHawk 07 Husqvarna Smr 510 83 CB1100F Turbo. CB1100f 1219cc big block turbo 86gpz1000r 86200x 85atc70
Gone.02  919, 96 CBR600F3, 85 XR200R

Offline 77F

  • Full Member
  • *
  • Posts: 27
Re: Engle cam for 750
« Reply #8 on: November 20, 2013, 06:20:26 pm »
Thanks Scottly,

       I read on hear all the time i never log on and  post for some reason Idk ? I never saw anything on Engle cams before always woundered why ? The shop my dad worked at MSI owned by his good freind (RIP) seemed to use them in everything Street and competition 750 Honda's !  Im not sure what year the flyer is from but possibly pre 77 due to the carb specs at the bottom ?

Regards,

             Josh
Logged
77F 836cc Rider, 78F Tracy Body 836cc Needs Resto, Early Tracy bodied CB750K 1160cc Stroker with Webers, 78k Was rider Now parts Bike, 79&80 CB750F, 98 SuperHawk 07 Husqvarna Smr 510 83 CB1100F Turbo. CB1100f 1219cc big block turbo 86gpz1000r 86200x 85atc70
Gone.02  919, 96 CBR600F3, 85 XR200R

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,542
  • Big ideas....
Re: Engle cam for 750
« Reply #9 on: November 20, 2013, 06:38:09 pm »
Good info Josh....I don't have that in my records. Thanks!
Logged
Owner of the "Million Dollar CB"

Offline 77F

  • Full Member
  • *
  • Posts: 27
Re: Engle cam for 750
« Reply #10 on: November 20, 2013, 06:49:43 pm »
Ken736cc,
    From the cams listed on the flyer to what cam grinds Engle's actually made seem to be different they also had a H-9-DF-1 cam which has more lift and duration. It looks closer to the cycle x cx-7 cam (I think ? ) Was going to run in new 836cc motor. I'll take pics of the H-9-DF-1 cam campared to the cx-7 see if it looks like what you got ! Unfortunately don't have any riding feed back on what the Engle's cams perform like last motor had a web 41a grind cam in it with unported k cylinder head and it had broad power range ?

Regards,

             Josh
Logged
77F 836cc Rider, 78F Tracy Body 836cc Needs Resto, Early Tracy bodied CB750K 1160cc Stroker with Webers, 78k Was rider Now parts Bike, 79&80 CB750F, 98 SuperHawk 07 Husqvarna Smr 510 83 CB1100F Turbo. CB1100f 1219cc big block turbo 86gpz1000r 86200x 85atc70
Gone.02  919, 96 CBR600F3, 85 XR200R

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Engle cam for 750
« Reply #11 on: November 20, 2013, 07:04:10 pm »
Do you have a pic of the stroker with the Webers..
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline ken736cc

  • When the cops pull me over, I usually let them off with just a warning.
  • Enthusiast
  • **
  • Posts: 175
Re: Engle cam for 750
« Reply #12 on: November 21, 2013, 11:20:08 am »
Thanks everyone. This is exactly what I needed to know.
Logged
K0 sandcast(in process of restoration), K0 diecast, K0 cafe racer
BMW R69S daily rider, 71SL350, 71 SL100, 63 SS50

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 19,651
  • Saver of unloved motorcycles.
Re: Engle cam for 750
« Reply #13 on: November 23, 2013, 09:29:13 pm »
I have an Engle in the drag bike's engine I haven't measured it yet. Now maybe it's on the list. I'll report back.
Logged
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline 77F

  • Full Member
  • *
  • Posts: 27
Re: Engle cam for 750
« Reply #14 on: November 24, 2013, 07:05:27 pm »
Ken736cc,
       Took pics and measured the lobes on the H-9 Df-1 cam. To compare to yours if it helps you better ID the one you got. But the pics were to big.  In. lobe measures 1.4860 from heal to nose and the Ex. is 1.4285. If the base circles were ground the same should be smaller heal to nose I guess ? But this kinda brought me to a question The heal to nose measurements were smaller on the Br-21 cam and one labeled for a fuel bike the base circle looks like it was ground smaller to gain the added lift anybody know this to be true or am i just an idiot lol ? I dug threw some folders but couldn't find a cam card on the Df-1.

 Mr. Rieck no problem ! 754 pm me an email address i can send you a pic of the Tracy bike with webers ! DonR Cool hope it helps you out to !

Regards,

    Josh

Logged
77F 836cc Rider, 78F Tracy Body 836cc Needs Resto, Early Tracy bodied CB750K 1160cc Stroker with Webers, 78k Was rider Now parts Bike, 79&80 CB750F, 98 SuperHawk 07 Husqvarna Smr 510 83 CB1100F Turbo. CB1100f 1219cc big block turbo 86gpz1000r 86200x 85atc70
Gone.02  919, 96 CBR600F3, 85 XR200R

Online scottly

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,164
  • Humboldt, AZ
Re: Engle cam for 750
« Reply #15 on: November 26, 2013, 07:21:31 pm »
Quote from: 77F on November 24, 2013, 07:05:27 pm
. If the base circles were ground the same should be smaller heal to nose I guess ? But this kinda brought me to a question The heal to nose measurements were smaller on the Br-21 cam and one labeled for a fuel bike the base circle looks like it was ground smaller to gain the added lift anybody know this to be true or am i just an idiot lol ?

    Josh
It was and still is common practice to regrind a stock cam by reducing the base circle, but due to shifting of timing, the reduction in the base circle may be more than the lift increase. My bike has a "mystery" regrind cam; it appears the base circle was reduced by about .050". One way to tell a regrind visually with the motor assembled is to look at the valve adjusters; with my cam, there are no threads visible above the lock-nuts.
Logged
Don't fix it if it ain't broke!
Helmets save brains. Always wear one and ride like everyone is trying to kill you....

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 19,651
  • Saver of unloved motorcycles.
Re: Engle cam for 750
« Reply #16 on: December 06, 2013, 09:15:56 pm »
I finally got a picture downloaded.
Logged
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.
Pages: [1]   Go Up
« previous next »